Baby Lock Walking Foot BLSA-WF Instructions
- June 6, 2024
- Baby Lock
Table of Contents
SEWING ACCESSORIES
Walking Foot (BLSA-WF)
Instructions
The Baby Lock Walking Foot is wonderful for fabrics that stretch or slip easily, such as velvet or corduroy. This foot has a set of feed dogs that help feed multiple layers evenly without shifting. This walking foot comes with two easily interchangeable soles, a standard sewing sole and an open toe sole.
To Attach Walking Foot on the Machine:
-
Raise the needle and presser foot.
-
Remove the presser foot, presser foot holder and presser foot holder screw.
-
Attach the walking foot to the presser bar with the lever surrounding the needle clamp.
-
Securely tighten the walking foot to the presser bar with the presser foot holder screw.
-
Operate the machine at low to medium speed.
Note: To use the needle threader, lower the presser foot and raise the needle to the highest position.
To Replace the Sole:
-
Loosen the screws 3 to 5 turns (see fig. 1) and slightly pull the sole holder out to release the sole.
-
Align the holes of the replacement sole so both sides are inserted in the holes, 2 holes on the left, and one on the right.
-
Tighten the screw.
FOR THE LOVE OF SEWING
www.BabyLock.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>