MALMBERRGS 99 930 08 Bathroom Fan Instruction Manual
- June 10, 2024
- MALMBERRGS
Table of Contents
- MALMBERRGS 99 930 08 Bathroom Fan
- Product Information
- Product Usage Instructions
- SAFETY INSTRUCTIONS
- MODEL DESCRIPTION AND FUNCTION
- DESCRIPTION / USE
- MOUNTING
- WIRING
- MAINTENANCE
- ENVIRONMENT AND RECYCLING
- Technical data
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MALMBERRGS 99 930 08 Bathroom Fan
Product Information
- Model Number: 99 930 08
- Product Name: Bathroom Fan
- Intended Use: For installation on the wall in spaces that require constant ventilation, such as basements, laundry rooms, bathrooms, or other rooms with high humidity.
- Technical Specifications:
- Voltage: N/A
- Temperature Range: N/A
- IP Rating: N/A
- Speed Power: 4W (low) / 6W (high)
- Air Pressure: 11 Pa (low) / 15 Pa (high)
- Noise Level: 26 dB(A) (low) / 32 dB(A) (high)
- Airflow: 109 mm – 160 mm
Product Usage Instructions
- Read the manual carefully before use and save the instructions for future reference.
- The fan must be permanently installed by a qualified electrician and protected by a fuse.
- Connect N and L according to the wiring diagram for use with a humidistat only. For an option with manual control at high speed setting, connect the switch to T.
- The fan should be cleaned approximately once a year with a damp cloth. Make sure the power is off before cleaning.
- The product should not be disposed of in household waste but must be recycled in an appropriate recycling site.
SAFETY INSTRUCTIONS
Please read the manual carefully before use! Save the instructions for future
reference.
WARNING!
- Disconnect the fan from the mains before installation, maintenance and/or repair.
- Installation, maintenance and/or repairs should be carried out by an authorised electri-cian and in accordance with these instructions.
- The fan should be connected to 230V, 50Hz.
- The fan must be protected by a fuse according to valid regulations.
- Check before installation that the fan is undamaged.
- The fan must only be used as it is intended to be used and in accordance with these instructions. Do not make any modifications to the fan.
- The appliance is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowl-edge on how to use it, unless they have received instructions concerning the use of the appliance from someone who is responsible for their safety.
- Keep children under supervision to make sure they do not play with the appliance.
- Do not use the fan in explosive environments, such as in the vicinity of flammable liquids, gases or dust, or in environments containing toxic or harmful substances.
- Do not block the openings of the fan.
- Follow all the directives and safety instructions for best results and service-life.
MODEL DESCRIPTION AND FUNCTION
This fan is designed for continuous operation in areas where constant
ventilation is need-ed due to high humidity. The fan has two speeds; low and
high, which is controlled by a humidistat or manually via a separate wall
switch or with the same switch as the lighting. The fan switches to high speed
when humidity exceeds 70% and stays in that position for 15 minutes after the
humidity has fallen below 70%.
When the fan has been turned on manually, e.g. with a switch, the fan will
switch to high speed and continue for 15 minutes.
DESCRIPTION / USE
The fan is intended for installation on the wall, in spaces that are in need of constant venti-lation, e.g.; basements, laundry rooms, bathrooms or other rooms with high humidity.
MOUNTING
- Mounting in duct with min Ø100 on wall. Attach with screws.
- Dismantle the fan cover to reach the screw holes.
WIRING
The fan is intended for permanent installation and the installation must be performed by a qualified electrician. The fan must be protected by a fuse. Connection to terminal block, which is underneath the fan cover, according to instructions below.
- For use with humidistat only, connect N and L according to the wiring diagram.
- For option with manual control at high speed setting, connect the switch to T.
MAINTENANCE
The fan should be cleaned approximately once a year for optimum performance. Make sure the power is off before cleaning. The fan should only be cleaned with a damp cloth.
ENVIRONMENT AND RECYCLING
The product should not be disposed of in household waste but must be recycled in an appropriate recycling site.
Technical data
- Voltage: 230V AC, 50Hz
- Temperature range: 0-40°C
- IP rating: IPX4
Malmbergs Elektriska AB, PO Box 144, SE-692 23 Kumla, SWEDEN
Phone: +46 19 58 77 00 info@malmbergs.com
www.malmbergs.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>