ring Base Station Z-Wave User Manual

: June 6, 2024
: Ring

Table of Contents

ring Base Station Z-Wave
Adding Sensor to a Z-Wave Network
Ring Base station – Learn Mode
Removing a Base station to a Z-Wave Network
Ring Base station – Lifeline
Ring Base Station – Reset
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ring Base Station Z-Wave

Adding Sensor to a Z-Wave Network

Ring Motion Sensor can be added via smart start or via classic inclusion mode

Smart Start Inclusion Steps:

Initiate add device flow in the Ring Alarm mobile application – Follow the guided add flow instructions provided in the application
Scan the QR code found on the package of the device or the QR code found on the back of the device

Classic Inclusion Steps:

Initiate add device flow in the Ring Alarm mobile application – Follow the guided add flow instructions provided in the application
Select add manually
Select Z-wave and select Add
Enter learn mode on the joining device

Ring Base station – Learn Mode

Adding a Base station to a Z-Wave Network
Ring Base station can be added via classic inclusion mode

Classic Inclusion Steps:

Start inclusion mode on the primary controller
From the application’s UI, navigate to controller’s device setting screen -> select Advance options -> Select Z-wave from “Protocol Adapters” and Select “Learn Mode” – DSK will be displayed (refer to the picture below)
Select “Begin to Learn Mode” in the UI
When the inclusion process incomplete, the LED on the base station will be solid blue

Joining another Z-wave network via learn mode is available only when the base station is not already paired to any other devices

Removing a Base station to a Z-Wave Network

Exclusion Instructions

Start exclusion mode on the primary controller
From the application’s UI, navigate to controller’s device setting screen ->
select Advance options -> Select Z-wave from “Protocol Adapters” and
Select “Learn Mode” – DSK will be displayed
Select “Begin to Learn Mode” in the UI
When the exclusion process incomplete, the LED on the base station will be solid blue

Ring Base station – Lifeline

Association
This base station has Group 1 is the “Lifeline” group, which can hold one device. The base station will send device reset locally notification to this group.

Ring Base Station – Reset

Factory Default Instructions

Launch Ring app (iOS or Android)
Navigate to Base Station Setting: Devices à Alarm Base Station à Tap on the gear icon located on the top right-hand corner
Navigate to Advanced Options à Z-Wave
Tap “Reset Z-Wave Network” and Select “Reset”

Warning: This process is irreversible. All your Z-Wave devices will be removed from your Base Station. You will have to manually reset and re-add each device to rebuild your network.
Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.

To review your warranty coverage, please visit www.ring.com/warranty.
© 2020 Ring LLC or its affiliates.
Ring, Always Home, and all related logos are trademarks of Ring LLC or its affiliates.