dji CP.OS.00000187.01 Action 2 Waterproof Case User Guide
- June 6, 2024
- DJi
Table of Contents
Waterproof Case
Product Information 
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMOTM product. The information in
this document affects your safety and your legal rights and responsibilities.
Read this entire document carefully to ensure proper configuration before use.
Failure to read and follow instructions and warnings in this document may
result in serious injury to yourself or others, damage to your DJI OSMO
product, or damage to other objects in the vicinity. This document and all
other collateral documents are subject to change at the sole discretion of DJI
OSMO. This content is subject to change without prior notice. For up-to-date
product information, visit http://www.dji.com and click on the product page
for this product.
By using this product, you hereby signify that you have read this disclaimer
and warning carefully and that you understand and agree to abide by the terms
and conditions herein. You agree that you are solely responsible for your own
conduct while using this product and for any consequences thereof. You agree
to use this product only for purposes that are proper and in accordance with
all applicable laws, rules, and regulations, and all terms, precautions,
practices, policies, and guidelines DJI OSMO has made and may make available.
DJI OSMO accepts no liability for damage, injury, or any legal responsibility
incurred directly or indirectly from the use of this product. The user shall
observe safe and lawful practices including, but not limited to, those set
forth in this document. Notwithstanding the above, your statutory rights under
applicable national legislation are not affected by this disclaimer.
OSMO is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as “DJI
OSMO”) and its affiliated companies. Names of products, brands, etc.,
appearing in this document are trademarks or registered trademarks of their
respective owner companies.
Introduction
The DJI ActionTM 2 Waterproof Case can be used to make the DJI Action 2
waterproof at depths of up to 60 m. When using the waterproof case, make sure
the inside of the waterproof case is dry and clean, properly locked, and that
the waterproof rubber ring is secure. Insert anti-fog inserts to prevent
fogging. The button on the waterproof case can trigger the power/record button
of DJI Action 2.
Installation is shown in the figure. The DJI Action 2 Camera Unit and the DJI
Action 2 “V% Front Touchscreen Module are not included.
- Make sure the anti-fog insert works properly. Replace the anti-fog insert regularly
- Clean the waterproof case after using. Make sure the waterproof case is clean at all times.
WE ARE HERE FOR YOU
Contact DJI SUPPORT via Facebook Messenger
http://weixin.qq.com/q/02Y8HiZQ_2eF410000g03M
OSMO is a trademark of DJI OSMO.
Copyright © 2021 DJI OSMO All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>