psb M4U 8 MKII Wireless Active Noise Cancelling HD Headphone User Guide
- June 6, 2024
- psb
Table of Contents
M4U 8 MKII
WIRELESS ACTIVE NOISE CANCELLING HD HEADPHONES
Quick Start Guide
Download the PSB Headphones Control App
|
http://www.psbspeakers.com/headphones-app
---|---
Getting Started
Remove the headphones from the protective case and expand to use.
Getting Started
Slide the left and right earcups up and down to adjust fit.
Wireless Pairing
Open the Bluetooth settings on your device and turn on Bluetooth.
Wireless Pairing
Turn the headphones to “ON” or “ANC” mode. Bluetooth indicator will blink red
and blue when ready for pairing.
Wireless Pairing
Select M4U 8 MKII from the Bluetooth list on your device. Bluetooth indicator on the headphones will turn solid blue when paired.
Active Noise Cancelling
Slide the three-position switch up to ANC to enable Active Noise Cancelling mode.
Wireless Controls
Use the ear cup controls to play, pause, and adjust the volume of music, or to answer and end phone calls.
Wireless Controls
Press the volume button to enable the Active Monitor function in Active Noise Cancelling mode only. Press again to disable the Active Monitor function.
Wired Connection
Plugin the headphone cable provided to the left or right ear cup for wired
mode.
Battery Charging
Plugin the USB-C cable provided to the right ear cup to recharge the internal MA batteries when needed. The power mode light will blink red when charging and turn off once the headphones are fully charged.
Headphone Care
Place your fingers on the inside edge of the earpad and pull to remove and replace the ear pads. Align the clips of the new earpad to the ear cup housing and snap into place.
Store your headphones in the protective case provided.
WIRELESS ACTIVE NOISE CANCELLING HD HEADPHONES
Quick Start Guide
Included Accessories
Airplane Adaptor
1/4 Stereo Adaptor
3.5mm Analogue Cable
USB-C Cable
Download the PSB Headphones Control App
Getting Started
Remove the headphones from the protective case and expand to use.
Slide the left and right earcups up and down to adjust fit.
Wireless Pairing
Open the Bluetooth settings on your device and turn on Bluetooth.
Turn the headphones to “ON” or “ANC” mode. Bluetooth indicator will blink red
and blue when ready for pairing. Select M4U 8 MKII from the Bluetooth list on
your device. Bluetooth indicator on the headphones will turn solid blue when
paired.
Active Noise Cancelling
Slide the three-position switch up to ANC to enable Active Noise Cancelling
mode.
Wireless Controls
Use the ear cup controls to play, pause, and adjust the volume of music, or to
answer and end phone calls. Ness, the volume button to enable the Active
Monitor function in Active Noise Cancelling mode only. Press again to disable
the Active Monitor function.
Wired Connection
Plugin the headphone cable provided to the left or right ear cup for wired
mode.
Battery Charging
Plug in the USB-C cable provided to the right ear cup to recharge the internal
AM batteries when needed. The power mode light will blink red when charging
and turn off once the headphones are fully charged.
Headphone Care
Place your fingers on the inside edge of the earpad and pull to remove and
replace the ear pads. Align the clips of the new earpad to the ear cup housing
and snap into place. Store your headphones in the protective case provided.
A member of The Lenbrook Group of Companies 1633 Granite
Court, Pickering, Ontario L1W 3K1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>