MOUSETRO ZN-S01 Smart Door Lock Instruction Manual

: June 15, 2024
: MOUSETRO

Table of Contents

Product layout
Packing List
Panel and lock body installation
Product characteristics
Warning
Operating guide
App download
Technical
Customers Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MOUSETRO ZN-S01 Smart Door Lock

MOUSETRO ZN-S01 Smart Door Lock

Product layout

The bottom of back panel

The bottom of front panel

Installation Note

When knob dot corresponds to the letter, the reversing switch on the circuit board also need to toggle to the corresponding letter.

Right-opening door: points to “R” Left-opening door: points to “L”
Product layout

Packing List

Front Panel
Back Panel
Buckle Box
Strike Plate
Lock Body
M4x40 Screws* 2
Lock Body Mounting Screws* 4
Key* 2
IC Card* 2
Hole Drawing* 1
Manual* 1

Panel and lock body installation

Use the hole adaptor to make door holes according to the size instruction.
Adjust center distance of lock body to 60mm or 70mm (factory setting is 60mm). Insert the lock body into the hole of door and lighten ii with screws.
Install the mounting studs to the front panel corresponding to the screw hole (as the picture shows). Put the main cable down through the lock body, make the panel close to the door surface.
Fix back plate and back panel onto the door, and tighten it with screw.
insert the main data cable to the socket which is on the back panel.
According to your actual door open direction to adjust the switch direction. “R” means right open and “L” means left open.
Fix the back panel onto the back plate, and tighten ii with screws.
Check whether the knob works properly, if not, back to step 6.
Install 4 batteries and the battery cover. Check all electronic functions and verify mechanical key to unlock. If all functions are normal, you can register an account and use your smart lock.

Product characteristics

(According to actual model):

Open Way: password, IC card, mechanic key, Bluetooth, and etc. Bring new experience to open the door.
Password: Adopting fashionable and advanced touch technology, it allows to put 1-12 digit numbers before and after true password.
Capacity: 50 sets of passwords and 50 sets of cards.
User management: The administrator has the highest rights to edit and set (users can only lock and unlock the door).
Alarm function: This machine has low power alarm, trial and error alarm.
External power supply: Please use power source or other equipment which is 5V to recharge for emergency when low power(please replace new battery once door is open).

Warning

Please reset factory default and clear all member records immediately after the lock is installed.
We suggest to change battery at least in 6 months period, in order to avoid smart lock damage because of exhausted battery.
The lock uses 4*AA alkaline batteries. When firs llime alarms “low battery, please replace battery”, ii can open around 50 limes according to different battery capacity. Al this lime, the battery should be replaced in lime to avoid the inconvenience caused by power depletion.
By continuous 5 limes wrong input with password/card, the lock will be alarmed and locked for 90 seconds.

Operating guide

Initialize the operation:
The initial password is “123456” without binding to Bluetooth.
Switch lock operation:
Use your mobile phone, password or IC Card to unlock when you are outside the door. Press the “*” key to lock ii off. The door knob can also unlock the door.
Doorbell function:
After waking up the screen, press”#” to ring the door bell.
Initialization Settings:
a. Long press the reset button of the back panel to restore the factory setting.
b. After removing the equipment in the APP, the factory setting will be automatically restored.
Add Bluetooth:
The main cable interface Select the”+” icon in the upper right corner of the app home page to add it
Manual addition method:
a. Click on the “Camera/ lock” category on the left.
b. Find the door lock (Bluetooth).
c. Touch the keyboard to wake up the button and start the Bluetooth distribution network.
d. In the third interface, wait for the device to connect.
Automatic search method:
a. Select the Search Device page
b. Touch the keyboard to wake up the button, and automatically search for the door lock device in the APP.
c. Click on the link to wait for the device binding.
Bluetooth Unlock
APP interface to the right slide unlock icon automatically unlock, left slide icon to close the lock.
Password Unlock
Click Member Management in the APP, add the password to the corresponding members according to the prompt, and then you can use the set password to unlock it.
IC Card Unlock
Click Member Management in the APP interface, add IC cards to the corresponding family members according to the prompts, and then you can use the input IC card to unlock ii the lock.
Automa tlc Lock
In the APP interface slide click Settings, open the automatic lock. After opening, the system will proceed for 10 seconds after opening the door locked.
Closure Away from Home
In the APP interface, click Settings to open the home layout. After opening, only the administrator IC card, fingerprint, secret the code can be unlocked.
Switch Language
In the APP interface, slide down and click Settings to select the language. Current language support: Chinese and English.

Please scan the QR code with your cell phone camera to watch the installation video.
Following the video guide to install may avoid most installation troubles.

App download

App page
App registration: please register new account or use sms password to enter APP. If you do not have an account, Click “new account to register, following steps, to get sms, and new password setting. Or go ahead to enter APP directly with exist account. Login way includes password, verifying password by sms, social account.

App page