Alecto ADB30WT Indoor LED Bell User Guide
- June 6, 2024
- Alecto
Table of Contents
ADB30WT
ADB30ZT
- Indoor bell LED
- Speaker
- Pairing and volume setting button
- Ringtone change button
- Doorbell LED
- Doorbell button
Do not place the doorbell directly on a metal surface or on a surface containing metal. This will have a negative effect on the doorbells operation.
Extra
Multiple indoor bells
Disconnect indoor bell
- Unplug the dinner bell.
- Press and hold the button while putting the inner doorbell back into the socket.
- Wait until the blue light goes out.
- The inner doorbell is now disconnected.
Specifications
| Indoor be pow supply: | 220.240V AC. Soliz |
|---|---|
| Outdoor bell power supply: | Battery-free |
| Traremisske range: | Up to 200 meters (depending on the environment) |
| Transmission frequency: | 433.92 MHz |
| A number Of motors: | 36 |
| Volume levels: | 4 |
| Water-resistant: | IP44 |
DECLARATION OF CONFORMITY
Hereby, Hesdo declares that the radio equipment type Alecto ADB30 is in
compliance with directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://DOC.hesdo.com/ADB30-DOC.pdf
v1.0
Hesdo BV
Azielaan 12 5232 BA, ‘s-Hertogenbosch
The Netherlands
www.alecto.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>