NITECORE ND01 USB Direct Charge build-in 2600mAh 18650 Battery User Manual

NITECORE ND01 USB Direct Charge build-in 2600mAh 18650 Battery User

Manual

Features

• USB Rechargeable Ultra Compact Flashlight

• Utilizes CREE XP-L HD V6 LED, with a maximum output of 1,000 lumens

• Maximum peak beam intensity of 8,000cd and maximum throw of 178 meters

• An optical system combined with crystal coating and “Precision Digital Optics
  Technology” (PDOT)

• Built-in 1 x 2,600mAh 18650 rechargeable Li-ion battery

• Built-in Li-ion battery charging circuit

• High efficiency constant circuit provides stable output up to 245 hours

• The metal tail switch controls 3 brightness levels

• A power indicator on the tail indicates the remaining battery power (Patent No. ZL201220057767.4)

• Thermal protection function

• Optical lenses with double-sided scratch resistant coating

• Constructed from aero grade aluminum alloy

• HA III military grade hard-anodized finish

• Waterproof in accordance with IPX8 (2 meters submersible)

• Impact resistant to 1 meter

• Tail stand capability

Specifications Accessories

Length: 118.6mm (4.67”) Clip, Lanyard, Holster, USB Charging Cable
Head Diameter: 24mm (0.94”)
Tail Diameter: 24mm (0.94”)
Weight: 99g (3.49oz)

Technical Data

Note: The stated data is measured using the built-in battery (1 x 2,600mAh 18650 Li-ion
battery) under laboratory conditions. The data may vary in real world use due to different
battery usage or environmental conditions.

Charging Function

The flashlight is equipped with an intelligent charging system. Please charge the product before the first use.

Connect to the external power: As

illustrated, use the USB cable to connect an external power supply (e.g. a USB adapter, a computer or other USB charging devices) to the USB port located on the tail to begin the
charging process.

Charging Indicator: When the charging

status is normal, the blue indicator will flash slowly. When the battery is fully charged, the indicator will become steadily turned on.

• The LOW and MID Level is still available when the flashlight is being charged.
• Power Input: DC 5V/1A
• The charging time is approx. 3.5 hours.
• The standby time is approx. 12 months when the flashlight is fully charged.

Operating Instructions On / Off

On: When the light is off, long press the Tail Switch to access LOW Level.
Off: When the light is on, long press the Tail Switch to turn off the light.

Brightness Levels

When the light is on, short press the Tail Switch to cycle through the following brightness levels: LOW – MID – HIGH.

Power Indication

When the light is off, short press the Tail Switch and the power indicator will flash to indicate the remaining power of the batteries:

• Flashing three times indicates that the power is above 50%;
• Flashing twice indicates that the power is below 50%;
• Flashing once indicates that the power is below 10%.
  Note: When the light is on and the power level is close to 50%, the power indicator will flash every 2 seconds to inform the user. The flashlight should be recharged when the power indicator flashes quickly and continuously and the output appears to be dim or the flashlight becomes unresponsive due to low power.

Thermal Protection Function

The flashlight has the Thermal Protection Function and regulates its output according its working status to maintain the optimal performance.
Note: The flashlight will also regulate its output to avoid overheating when accessing the
HIGH Level for over 4 minutes.

Cautions

1. Please charge the battery before the first use.
2. Please recharge the product every 3 months when left unused for a prolonged time.
3. DO NOT direct the beam towards naked eyes.
4. DO NOT disassemble, modify or reconstruct the product, otherwise the warranty will be nullified, and the product might be damaged.

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if

1. the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
2. the product(s) is/are damaged due to improper use. For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com ※ All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>