NITECORE UT05 400 Lumen Lightweight Waist Belt Running Light Instruction Manual

June 3, 2024
Nitecore

NITECORE-LOGO

NITECORE UT05 400 Lumen Lightweight Waist Belt Running Light

NITECORE-UT05-400-Lumen-Lightweight-Waist-Belt-Running-Light-
PRODUCT

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective/malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.

The warranty will be nullified if

  1. the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
  2. the product(s) is/are damaged due to improper use. (e.g. reversed polarity installation)
  3. the product(s) is/are damaged due to using an unofficially recommended power source.

For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to [email protected]

All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

Features

  • Split type waist light
  • 160° wide range flood beam
  • Utilizes a high CRI COB light source (CRI≥90, Color Temperature: 4000K) with a max output of 400 lumens
  • Highly efficient constant current circuit provides a stable output
  • Advanced Power Cut-Off (APC) technology for an ultra-low standby power consumption
  • One button design to control 2 brightness levels
  • Convenient USB-A plug compatible with universal USB power sources
  • Constructed from aero grade aluminum alloy
  • HA III military grade hard-anodized finish
  • Waterproof and dustproof rating in accordance with IP66
  • Impact resistant to 1 meter

Specifications

  • Dimensions: 73mm×18mm×8.3mm (2.87″ × 0.71″ × 0.33″) (Part Without Button)
    • 87.4mm×18mm×8.3mm (3.44″ × 0.71″ × 0.33″) (Part With Button)
  • Total Length: 750mm (29.53″) (Cable Included)
  • Weight: 40.4g (1.43oz) (Power Source Not Included)

Accessories

  • 4 x Hook-and-loop Straps, USB Cable Fastener

Power Source Options

Compatibility
  • NITECORE Power Bank: Y (Recommended)
  • USB Power Source (5V/1A or Above Output Available): Y (Compatible)

Note: Please use a USB power source made by professional manufacturers or sold by authorized dealers to avoid the risk of accidents.

Technical Data

NITECORE-UT05-400-Lumen-Lightweight-Waist-Belt-Running-Light-
FIG-3

Note: The stated data is measured using the NB10000 Power Bank (10,000mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.

Installation on the Running Belt

NITECORE-UT05-400-Lumen-Lightweight-Waist-Belt-Running-Light-
FIG-2

Operating Instructions

Installation on the Running Belt

  • Used with the NITECORE BLT10 Running Belt: Attach the hook side of the UT05 to the loop side of the BLT10 as illustrated.
  • Used with other running belts or backpacks: Use the hook-and-loop straps to fix the UT05 on the running belt without the loop side.

Connecting a Power Source

Use the USB cable of the UT05 to connect an external USB power source and fix them with the USB cable fastener.

  1. CAUTION:  Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
  2. When the product is kept in a backpack, please disconnect it from the power source to prevent accidental activation.
On / Off
  • On: When the light is off, long press the Power Button to turn it on and access the LOW Level.
  • Off: When the light is on, long press the Power Button to turn it off.
Brightness Levels

When the light is on, short press the Power Button to switch between HIGH and LOW.

Changing Power Sources

The power source should be replaced or recharged when the output appears to be dim or the light becomes unresponsive due to low power.

SYSMAX Innovations Co., Ltd.

  • TEL: +86-20-83862000
  • FAX: +86-20-83882723
  • E-mail: [email protected]
  • Web: www.nitecore.com
  • Address: Unit 6355, 5/F, No. 1021 Gaopu Road, Tianhe District, Guangzhou, 510653, Guangdong, China

Please find us on facebook : NITECORE Flashlight

Thanks for purchasing NITECORE!

Made in China

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals