ELRO Smoke Alarm FZ5002R Instruction Manual
- June 6, 2024
- ELRO
Table of Contents
ELRO Smoke Alarm FZ5002R Instruction Manual
FZ5002R
INTENDED USE: FIRE SAFETY
ESSENTIAL CHARACTERISTICS: PASSED
Nominal activation conditions / Sensitivity, Response delay (response me) and
Performance under fire condition
- Operational reliability
- Tolerance to supply voltage
- Durability of operational reliability and response delay, temperature resistance, vibration resistance, humidity resistance, corrosion resistance, electrical stability.
Symbols: Recycling and disposal: The WEEE symbol (a) means that this
product and batteries must be disposed separately from other household waste.
When it reaches its end of life, take it to a designated waste collection
point in your area to guarantee a safe disposal or recycling. Protect the
environment, human health and natural resources! Read the manual (b) before
use and store it in a safe place for future use and maintenance. Download (c)
Declaration of Performance (DoP). Hereby, ELRO Europe declares that the radio
equipment type FZ5002R is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address: www.elro.eu/compliance Warnings: To prevent injury, this
apparatus must be securely attached to the ceiling in accordance with the
installation instructions. Batteries shall not be exposed to excessive heat
such as sunshine and fire. Battery lifetime shortens without monthly test.
Keep away from air conditioning/ventilation. Do not paint or cover alarm.
Consult local regulations. Troubleshooting: False alarm is often caused by
dust or steam. In case of doubt: Leave the building and take action!
Additional mounting
instructions: Corridor max width 3m: Max 15m between 2 alarms. Max. 7,5m to
front side and alarms at edges/crossings of corridors. Galleries: Length and
width >2m and >16m², additional alarms below gallery. Partial roof slopes:
Flat ceiling ≤1m wide, consider as roof slope. Flat ceiling >1m wide, consider
as flat ceiling.
Max. transmission power: 10dBm
1. Content
2. Activate
3. Testing
4. Connect/Learning
5. Rooms
a
5b. Roof
5c. Beams
6. Test & clean
7. Hush
Clear code
Low battery alert? Replace battery and test! (see 2 and 3). Mute warning for 10 hours: press test bu on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>