FREDDO FR9118 24V Fire Truck Ride On Instruction Manual

FREDDO FR9118 24V Fire Truck Ride On

Product Specifications:

• Dimensions: 55.91 x 31.5 x 28.74 inches
• Weight Capacity: 88 lbs per child
• Age Range: 36-95 months
• Material: Plastic, Metal
• Battery: 12 V 7 AH; 12 V 10 AH; 24 V 5 AH; 24 V 7 AH
• Motor Power: 45 W2; 452+25 W2; 200 W2
• Battery Voltage: DC 12 V; DC 24 V

Product Usage Instructions

Assembly and Inspection

1. Ensure all spare parts are complete before assembling the car.
2. Regularly check for loose screws and ensure components are not damaged.
3. Carefully disassemble the product according to the guidebook.

Precautions and Safety:

• Only use in safe areas away from roadways, steep inclines, or water bodies.
• Maximum user weight is 88 lbs per child.
• Always wear shoes while using the product.
• Do not allow more than two riders on the car.

Maintenance and Care:

• Regularly inspect the product, charging system, electric connections, and car body for any damage.
• Keep the product clean and ensure electric elements are not damaged.
• Repair or replace any damaged parts before further use.

Remote Control and Battery Usage:

• Change remote control batteries when low to maintain control functions.
• Ensure proper functioning of lights and music by replacing batteries as needed.

Additional Tips:

• Avoid playing with the car in wet conditions or near fire sources.
• Do not change switch settings while the car is in motion.
• Always turn off the power switch when not in use to conserve battery life.

FAQ:

Q: Can the car be used by more than one child?
A: No, the car is designed to carry only one child at a time with a maximum weight limit of 88 lbs.

Q: What should I do if the remote control battery is low?
A: Change the battery to maintain control functions, especially for right/left movements.

Q: How should I store the car when not in use for a long time?
A: Disconnect the battery plug-in unit and turn off the power switch to preserve battery life.

Caring for Your Vehicle

1. Always check and maintain your vehicle in order to ensure your baby accidental injury
2. Check all the spare parts whether are completed before assemble the car. If missing, contact with us free.
3. Regular inspection screw is loose, the components are not damaged.
4. Regular clear the product, note the electric elements are not damaged.
5. Disassembly the product according the guide book carfully.
6. Regular checking the product and charge, electric wire connection, car body and other details. Once found anything damaged, repair or replace succeful then use again.

Please read the instructions carefully before use!

Instructions before use:
Dear customers,please read this manual carefully before you use the products.Because it can tell you the correct method of installation and operating procedures to avoid damaging the products or hurting your children caused by incorrect operating procedures and without understanding safety knowledge. Please keep this instruction for future use and place it in easily accessible place.

WARNING:

• To reduce the risk of injury, adult supervision is required.
  Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than two rider;

• Maximum user weight is 88lbs per child.

• Only use the battery specified by the manufacturer, and Only use the charger specified by the manufacturer.

Operative norm:

• EN 71-1-2-3;  EN62115
• ASTM F963  CPSIA
• GB6675.1-2014  GB6675.2-2014
• GB6675.3-2014  GB6675.4-2014
• GB19865-2005

Attention

• Before use, please check whether the car is assembled ok and tightened.
• Do not play on street, road, slope or gutterway.
• Do not play on marble or floor tile.
• Do not change forward/backward switch when car running. Do not let children stand on seat.
• Do not change lines on the car or add other electronic device.
• Do not play car or remote control in rainy day or wet place, do not pull water or other liquid on car. Stay away from fire, or will damage line.
• Meeting obstacle, please stop the car. Remove the obstacle, then playing.
• Do not play car in the room, it may damage furniture and hurt children.
• When remote control battery is low, it only can control forward, can not control right/left and the car may shake. Please change the battrery.
• When light and music battery is low, light will quench and no music. Other function is normal. Please change the battery.
• The car only car load 1 child. Maximum is 35KG.
• Please turn off power switch if no play. Long time no use, please disconnect battery plug-in unit.

CAUTION:

How to remove and insert batteries:

1. :non-rechargeable batteries are not to be recharged;
2. : different type of batteries or new and used batteries are not to be mixed;
3. : batteries are to be inserted with the correct polarity;
4. : exhausted batteries are to be removed from the toy;
5. : the supply terminals are not to be short-circuited.
6. : rechargeable batteries are only to be charged under adult supervision; rechargeable batteries are to be removed from the toy before being charged.

How to remove and insert batteries:

1. : Take down the screw on the battery cover at the back of the controller and remove the battery cover.
2. : Add two pcs “AAA” batteries(not included).
3. : Assemble the battery cover and tighten the screw to fix the battery cover.

Failures and Solutions

USER WARNINGS

The following safety hazards may result in serious injury or death:

• A: Never leave a child unattended.
• B: Always sit in the seat when using this vehicle.
• C: Keep your hands,hair and clothes away from moving parts.
• D: Always wear shoes when operating this vehicle.
• E: Only one rider is allowed on the vehicle at a time.
• F: Children under 3 years of age cannot use the vehicle.
• G: Only drive on level ground.
• H: Do not go near swimming pools or other bodies of water,drop-offs,or up and down steep inclines.
• J: Do not drive the vehicle into loose dirt,mud,sand, fine gravel, or on wet surfaces.
• K: Do not drive the vehicle on streets or near cars.
• L: WARNING.Not to be used in traffic.
• M: A recommendation for adult supervision of young children.
• N: The toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.

SPECIFICATIONS

Parts name

HARDWARE

Assembly Process Diagram

1. Before using,the vehicle must be assembled by an adult.it takes about 10minutes to assemble the product.

2. Small parts are likely to be swallowed into throat, and prohibit children from touching and playing.

3. Before installation,please check the number of all parts, and packaging much ray rust thie da cop one. rohit children from playing with it,which may result in the dander or sunocaton.

4. Assembly front wheel:As shown, first of all, put a shim set into the front axle,set into the front wheel, and then sets out into a shim,mounted on the cotter pin,cover wheel cover the method of assembling the same other front wheel.

5. Put the motor on the rear axle,put the motor into the hole of the body.may sure that the motor is colosed the body.then take out the wheel with the protruding plum set into the motor.pad on the shim and the cotter pin, then cover the wheel cover.

Then use the same method of assembling the other rear wheel.nstall cushion;cushion back card hooks to the body,take the two self-tapping screws fixed cushion.

How to use remote control

Instructions:

Hold down Forward key & Back key for 3 seconds start match code, The first LED flicker;
Pres these up see. . iT up to ped Me code sume sed let up is hier. speed, Back a car is only low speed
Press “P” key hold the brake, All LED flicker
Remoter 10 seconds not run will be standby ,Press any key wake up Appearance structure (MP3 Board)

Appearance structure (MP3 Board)

Key description:

1. *1- Mode switch key. Modes include: story, music, FM, B)l), etc
2. *2 – Previous song, Long press volume down
3. *3 – Pause. FM mode, Long press search station.
4. *4- Next song, Long press volume up

Operating function

Open the door

• Plug in the red end plug on the battery, connect the total power supply;
• Install the seat cushion, with two 4X10MM screws in front of the seat.
• Steering wheel installation: one key is inserted into the steering rod, and the installation is completed.
• install warning light alarm: connect the alarm lamp wire to the line on the front of the car, test the alarm light, and then put the warning light on the front of the car, and finally put the warning light on the card.
• install the reflector: the mirror is inserted directly into the front of the car.
• install fire hose: insert directly on both sides of the seat.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>