774 Compact Diehl Metering Installation Guide
- June 7, 2024
- DIEHL
Table of Contents
774 Compact Diehl Metering
Product Information
Specifications
- Model : SHARKY 774 Compact
- Frequency: 434 MHz 10mW e.r.p., 868 MHz 25mW e.r.p.
- Operating Conditions : RH 93%
- Measurement Range: 3-10 x DN
Product Usage Instructions
Installation
- Ensure the device is mounted securely in a suitable location.
- Connect the necessary pipes following the installation guidelines.
- Check the alignment and positioning of the device for accurate readings.
Operation
- Power on the SHARKY 774 Compact device.
- Set the desired parameters for measurement as per your requirements.
- Monitor the display for real-time data readings.
Maintenance
- Regularly check and clean the device to ensure accurate measurements.
- Replace any worn-out parts following the manufacturer’s guidelines.
- Calibrate the device periodically to maintain precision.
FAQ
- What should I do if the device displays an error?
- If you encounter an error message, refer to the user manual for troubleshooting steps. If the issue persists, contact customer support for assistance.
- How often should I calibrate the SHARKY 774 Compact?
- We recommend calibrating the device annually or as per the manufacturer’s recommendations to ensure accurate measurements.
FEATURES
WARNING
INSTALLATION
CHARGING
SCAN
EU DECLARATION OF CONFORMITY
EU DECLARATION OF CONFORMITY
- Type /Technology /No of the EU type-examination certificate
- 774/ Ultrasonic Thermal Energy Meter /DE-13-MI004-PTB008
This declaration of conformity is issued under the sole responsibility of the manufacturer. The object of the declaration described above is in conformity with the relevant Union harmonization legislation. insofar as it is applied:
EU DECLARATION OF CONFORMITY
Device Type / Product, object of the declaration
Type /Designation
774 /Thermal Energy Meter
This declaration of conformity is issued under the sole responsibility of the manufacturer. The object of the declaration described above is in conformity with the relevant Union harmonisation legislation, insofar as it is applied:
In conformity with the following relevant harmonized standards or normative documents or other technical specifications:
Name and address of the manufacturer/DIEHL METERING
Diehl Metering GmbH – Industriestrasse 13 91522 Ansbach – Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>