FIILPOW A6 PRO Tire Inflator User Manual

FIILPOW A6 PRO Tire Inflator

PRODUCT OVERVIEW

1. Power button
2. Pressure value
3. Pressure unit
4. “+” button
5. “-” button
6. LED scree
7. Preset mode
8. Unit button
9. Air tube and connector
10. Emergency light
11. Light button
12. DC charging cable

PACKAGE CONTENT

A6 Pro Tire inflator × 1

Needle valve adaptor × 1

|

Extension nozzle × 1

|

Schrader-Presta valve adaptor × 1

Replacement fuse× 1

|

Carrying bag × 1

|

User manual × 1

Carefully check package contents, if anything is missing or damaged, please contact online customer service for support.

CONNECTING AIR TUBE WITH INFLATED ITEMS

1. Pull out the built-in air tube on the upside of inflator.
2. Connect the air tube with the inflated item.

CONNECTING THE AIR TUBE AND NOZZLE

Schrader Valve
Tires on cars, motorcycles, e-bikes, and most mountain bikes use a Schrader valve.

To inflate:
The inflator can be directly connected to a Schrader valve to start inflating.

To deflate:
Use an proper tool(such as 4mm Allen wrench) to press the pin inside the air valve to release air.

Presta Valve Adapter
Road bicycles and certain mountain bikes use a Presta valve which requires the included Presta valve adapter to be used.

To inflate:

1. Connect the Presta valve adapter to the Schrader valve of the air tube.
2. Unscrew the ring of the Presta valve of the tire.
3. Connect the Presta valve adapter to the tire’s Presta valve to start inflating.

To deflate:
Unscrew the ring of the tire’s Presta valve, and press the valve stem down to release air.

Needle Valve Adapter
To inflate balls like basketballs and footballs, the included needle valve adapter will need to be used.

To inflate:
Screw the needle valve adapter onto the Schrader valve adapter, then insert the needle into the valve of the ball to start inflating.

To deflate:
Insert the needle valve adapter into the valve of the ball, and gently apply pressure to the ball to release air.

CONNECTING THE INFLATOR WITH THE CAR

1. Open the cover of the DC cable compartment below the inflator.
2. Take out the adapter of the DC cable and plug it into a 12V cigarette lighter socket.

Note:
Please make sure the car engine is running.
Please make sure the cigarette lighter socket functions well before plugging the adapter of DC cable.

Small tips to replace the fuse:

1. Unscrew the cap on the head of the adapter of the DC cable.
2. Take out the old fuse and insert the replacement fuse.
3. Screw back the cap.
   

TURN ON/OFF THE INFLATOR

Turn ON
Long press the power button 1.5 seconds to turn on.
Turn OFF
When the inflator is turned on, long press the power button 1.5 seconds to turn off.

DETECTING CURRENT PRESSURE VALUE

When the inflator is turned on, connect the air tube to the inflated device, and then the LED screen will automatically display current pressure value.

DETERMINING THE RIGHT PRESSURE VALUE

For safety and prevent injuries from bursting items due to over-inflation, always refer to the instructions or relevant directions accompanying the item to be inflated before inflating it, in order to determine the correct air pressure.

Tires
The recommended air pressure of tires for cars, bicycles, and motorcycles is indicated on the tire’s sidewall. The recommended tire pressure for cars is also indicated on the driver’s side door jamb. For details concerning load carrying capacity and recommended air pressures, refer to your vehicle’s instructions or manual.

Balls
The recommended air pressure for footballs, basketballs, volleyballs, and other balls is indicated near the ball’s air valve.

Air Pressure Reference Table

Category

| Type|

Recommended Pressure Range

---|---|---

Bicycles

|

12-, 14-, & 16-inch bicycle tires
20-, 22-, & 24-inch bicycle tires
26-, 27.5-, & 29-inch mountain bike tires
700c road bike clincher tires
700c road bike tubular tires

|

30 – 50psi
40 – 50psi
45 – 65psi
100 – 130psi
120 – 145psi

Motorcycle

|

Scooter & street motorcycle tires

|

1.8 – 3.0 bar

Cars

|

Car tires

|

2.2 – 2.8 bar

Balls

|

Basketball Soccer ball Volleyball Football

|

7  – 9 psi
8 – 16 psi
4 – 5 psi
12 – 14 psi

For safety, please read the recommended inflation pressure value provided by the manufacturer of the inflated devices before inflating. Otherwise, it might cause unexpected injury or burst due to over-inflation.

MANUAL MODE AND 4 SMART MODES

Switch Mode
Click the unit button to cycle through car mode motorcycle modebicycle modeball modemanual mode.

Note:
1. The tire inflator will automatically turned on by manual mode. When in the manual mode, no mode icon is selected on the screen.

Switch Pressure Unit
When on the manual mode, long press 1.5 seconds to switch from PSI,Bar, Kpa pressure unit.

Default Pressure Value Of Different Modes

Mode

|

Default Pressure Value

|
---|---|---

Manual mode
(When in the manual mode, no mode icon is selected on the screen. )

|

30PSI(Can be changed)

| ****

Car mode

|

2.5BAR

|

****Motorcycle mode

|

2.4BAR

|

Bike mode

|

45PSI

|

Ball mode

|

8PSI

| ****

Note:

1. The default pressure value of each smart mode is the most frequently used pressure value for its category.
   Please refer to the instructions or user manual of the item being inflated for actual inflation pressure specifications.

2. In the manual mode, The last target pressure value will be saved as its default pressure value. When the screen displays the real-time pressure value, click “+”, “-” button to check out default pressure value of the manual mode.

3. The pressure value and pressure unit of the smart modes can not be changed. When one of the 4 modes above is selected, it will automatically shift to manual mode, if any click of “+” or “-” button.

Adjusting the Preset Pressure

After selecting a mode, press “+” or “-” button to increase or decrease the preset pressure value. Press and hold the “+” or “-” button to quickly adjust the pressure value. After three times’ blinks, the target pressure value will be confirmed.

With every single click, the current pressure value will increase/decrease by 1PSI (0.1Bar/ 6.9 KPa) according to respective pressure unit.

Note: When adjusting a preset pressure, the blinking value indicates the target pressure. And a non-blinking value indicates the real-time pressure.

START / PAUSE

Start
When the target pressure value is confirmed, press the power button to start inflating.
Pause
When inflating, press the power button to pause.

Auto-Stop:
In these three cases as below, the inflator will automatically stop inflating. Please restart the inflator to continue inflating.

1. Inflating above 3 minutes when the inflating pressure value is over 120PSI.
2. Inflating above 5 minutes when the inflating pressure value is below 5PSI.
3. Inflating over the maximum inflating time of 30 minutes.

DISCONNECTING THE AIR TUBE

The inflator’s air tube may get very hot after inflating. To prevent injuries, exercise caution when disconnecting it from a valve. Some air may leak out of the valve when disconnecting the air compressor. To avoid pressure loss, quickly disconnect the air hose from the valve.

LIGHT

When the inflator is turned on, press light button to turn on the light. When the light is on, press light button to cycle through SpotlightSOSStrobeOFF.

TROUBLESHOOTING

Problem

| Possible Reason|

Solution

---|---|---

The inflator does not start.

| The target pressure setting might be below the actual pressure of the item you are inflating.| Adjust the target pressure setting to a higher pressure.
The power cord is not plugged in.| Plug the power cord into a working power outlet.
The circuit breaker is stripped.| Reset the circuit breaker.
The fuse in the 12V DC cable is blown.| Replace the fuse.

SPECIFICATIONS

SAFETY INSTRUCTIONS

• Read and follow all instruction before use.
• To avoid damage to the compressor and the cigarette adaptor, please only use 12V DC (10-15amps) cable with this inflator.
• Inspect air inflator before use. If cracked, broken or damaged parts are found, qualified technicians should repair damaged parts.
• Do not leave the air inflator unattended while in operation. Keep out of reach of children.
• Do not point the air outlet toward any person or animal.
• Do not over inflate products beyond manufactures’ recommendations. Over inflating may cause unexpected injury and burst.
• This inflator is designed for occasional use only. Operation over an extended period of the time will overheat the unit and damage the inflator.
• Do not use the inflator while the vehicle is moving.
• Do not kink or block the air hose while the inflator is working.
• Make sure the inflator pull out after use, or flame out of the vehicle. Otherwise it might damage the inflator due to burning circuit board.
• Do not use this product for purposes other than its intended use.
• Do not disassemble or tamper with this inflator.
• Never expose the air inflator to rain, frost or temperatures above 60° C or temperatures below -30° C.
• Do not expose the unit to moisture.
• Keep the tire inflator or its components from getting wet. Make sure the cord is not exposed to hot objects, oil or sharp edges.
• Do not put the tire inflator in or around flammable environments.
• Only use accessories and parts specified in the instruction book or recommended by the manufacturer.
• Do not store the tire inflator in high-temperature or humid environment.

INSTRUCTIONS ON ENVIRONMENT PROTECTION

Do not dispose of this product in the usual household garbage at the end of its life cycle; hand it over at a collection point for the recycling of electrical and electronic appliances.
The symbol on the product, the instructions for use or the packing will inform about the methods for disposal.
The materials are recyclable as mentioned in its marking. By recycling, material recycling or other forms of re-utilization of old appliances, you are making an important contribution to protect our environment.

WARRANTY CARD

¤ Your Warranty Includes
24-Month Coverage Within 24 months of purchase, we will provide timely and effective online after-sales service. We will repair or replace any defective product (due to manufacturing fault) within the warranty period.

¤ How to Return Your FIILPOW Product
Contact [email protected] with your order number. We will issue you a return label for your return. Tear off the ‘Return Details’ page and fill in the details. Include this inside your return package.
We will issue your replacement/refund on receiving the return package.

¤ Return Details
In order to process your return as quickly as possible, we require the following information. Please fill out this form and include it in your return package.

Purchase Name:|
---|---
Order Number:|
Date of Purchase:|
Your Email Address:|
Place of Purchase:|

If your purchase was fulfilled by Amazon, please use Amazon’s 30-day return service.

 [email protected]|  Website: www.fiilpow.com
---|---

Tel:+1 347-307-8957 Mon-Fri 9AM-5PM (PT)
www.fiilpow.com
www.facebook.com/Fiilpowofficial/
 [email protected]
 Shenzhen Zhuangzhou Mengdie Trade Co., Ltd.
 C1606Y, Tianan International Building, No. 3012, Renmin South Road, Jiabei Community, Nanhu Street, Luohu District, Shenzhen

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>