NUX NDS-5 Fireman Guitar Effect Owner’s Manual
- June 6, 2024
- NUX
Table of Contents
Verdugo Series
Owner’s Manual
NDS-5
Copyright Copyright 2020 Cherub Technology Co. All rights reserved NUX and Fireman Distortion are trademarks of Cherub Technology Co. Other product names modeled in this product are trademarks of their respective companies that do not endorse and are not associated or affiliated with Cherub Technology Co. Accuracy Whilst every effort has been made to ensure the accuracy and content of this manual, Cherub Technology Co. makes no representations or warranties regarding the contents.
WARNING!-IMPORTANT SAFETY INSTRUCTIONS
BEFORE CONNECTING, READ INSTRUCTIONS
WARNING: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
CAUTION: To reduce the risk of fire or electric shock, do not remove
screws. No user-serviceable parts inside. Refer servicing to qualified service
personnel.
CAUTION: This equipment has been tested and found to comply wi h the
limits for a Class B digital device pursuant to Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The lightning symbol within a triangle means “electrical caution!” It
indicates the presence of information about operating voltage and potential
risks of electrical shock.
The exclamation point within a triangle means “caution!” Please read the
information next to all caution signs.
- Use only the supplied power supply or power cord. If you are not sure of the type of power available, consult your dealer or local power company.
- Do not place near heat sources, such as radiators, heat registers, or appliances that produce heat.
- Guard against objects or liquids entering the enclosure.
- Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
- The power supply cord should be unplugged when the unit is to be unused for long periods of time.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and at the point where they exit from the apparatus.
- Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to practice “safe listening”.
Follow all instructions and heed all warnings
KEEP THESE INSTRUCTIONS!
Overview
FIREMAN is based on the legendary amplifier builder’s famous distortion pedal. It’s a very amp-like distortion pedal with Modern Brown Sound. We designed it with 2 independent VOLUME, GAIN control knobs to fit rhythm and solo applications. FIREMAN offers a True-bypass / Buffer-bypass toggle switch, and a 9V / 18V toggle switch. The 18V position doubles the working voltage inside to give you a wider dynamic range.
Features:
- Modem Brown Sound in a box
- True-bypass / Buffer-bypass toggle switch
- 18V / 9V toggle switch to get the different dynamic range
- 2 independent GAIN, VOLUME knobs for rhythm/solo application
- 9V Negative Tip Power Adapter Input @4—e
Control Panel
VOLUME1
Knob Adjusts the output level while in Channell.
GAIN1
Knob Adjusts the distortion situation of the sound while in Channell.
VOLUME2
Knob Adjusts the output level while in Channel2.
GAIN2
Knob Adjusts the distortion range of the sound while in Channel2.
BASS
Knob Adjusts the low-end response of distortion sound.
TREBLE
Knob Adjusts the high-end response of distortion sound.
TIGHT
Knob Shapes the low-frequency content. ( Turn it up to tighten the sound.)
PRESENCE
Knob Adjusts the ultra-high-end frequency of distortion sound. 1/2 Foot-switch
Chooses the current Channel for 1 or 2.
ON Foot-switch
Engages or disengages the distortion sound.
I/0 Jacks
INPUT
Jack Connects with your guitar or the signal from the guitar side.
BF/TB Toggle
Switch BF means Buffer-bypass, TB means True-bypass.
18V/ 9V
Toggle Switch The pedal uses 9V power, you can choose an 18V position to
double the working voltage inside to get a wider dynamic range.
OUTPUT
Jack Connects with the amplifier or to the amp side.
EXT. SW
lack Connects with TRS dual foot-switches to replace the 2 foot-switches
function on the pedal.
DC
lack Connects with 9V Negative Tip power with 100ma adaptor.
Connection Methods
Technical specifications
-Frequency Response: 20Hz-20kHz – ±1dB
-Input Impedance: 2.2MQ -Output Impedance: 11Q
-Power Supply: 9V DC, Negative lip (ACD-006A)
-Dimensions: 105(L)x115(W)x58(-1)mm -Weight: 460g
Accessories: User manual
‘Specifications and features are subject to change without notice.
CE mark for European Harmonized Standards
CE mark which is attached to our company’s products of Battery means the
product is in full conformity with the harmonized standard(s) EN
61000.6.3:2007+A1:2011 & EN 61000.6-1:2007 Under the Council Directive
2004/108/EC on Electromagnetic Compatibility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>