CYBEX CI-DBV Ion Series Vertical Dumbbell Rack Owner’s Manual
- June 6, 2024
- CYBEX
Table of Contents
CYBEX CI-DBV Ion Series Vertical Dumbbell Rack Owner’s Manual
Corporate Headquarters
Columbia Centre III, 9525 West Bryn Mawr Avenue, Rosemont, Illinois 60018 •
U.S.A.
847.288.3300 • FAX: 847.288.3703
Service phone number: 800.351.3737 (toll-free within U.S.A., Canada)
Global Website: www.lifefitness.com
International Offices
AMERICAS
North America
Life Fitness, Inc.
Columbia Centre III
9525 West Bryn Mawr Avenue
Rosemont, IL 60018 U.S.A.
Telephone: (847) 288 3300
Service Email: customersupport@lifefitness.com
Sales/Marketing Email: commercialsales@lifefitness.com
United Kingdom
Life Fitness UK LTD
Queen Adelaide
Ely, Cambs, CB7 4UB
Telephone: General Office (+44) 1353.666017
Customer Support (+44) 1353.665507
Service Email: uk.support@lifefitness.com
Sales/Marketing Email: life@lifefitness.com
**All Other EMEA Countries and Distributor Business EMEA***
Bijdorpplein 25-31
2992 LB Barendrecht
THE NETHERLANDS
Telephone: (+31) 180 646 644
Service Email: EMEAServiceSupport@lifefitness.com
Brazil
Life Fitness Brasil
Av. Rebouças, 2315
Pinheiros
São Paulo, SP 05401-300
BRAZIL
SAC: 0800 773 8282 option 2
Telephone: +55 (11) 3095 5200 option 2
Service Email: suportebr@lifefitness.com
Sales/Marketing Email: vendasbr@lifefitness.com
Germany, Austria, and Switzerland
Life Fitness Europe GMBH
Neuhofweg 9
85716 Unterschleißheim
GERMANY
Telephone:
+49 (0) 89 / 31775166 Germany
+43 (0) 1 / 6157198 Austria
+41 (0) 848 / 000901 Switzerland
Service Email: kundendienst@lifefitness.com
Sales/Marketing Email: vertrieb@lifefitness.com
ASIA PACIFIC (AP)
Japan
Life Fitness Japan, Ltd
4-17-33 Minami Aoyama 1F/B1F
Minato-ku – Tokyo 107-0062
Japan
Telephone: (+81) 0120.114.482
Fax: (+81) 03-5770-5059
Service Email: service.lfj@lifefitness.com
Sales/Marketing Email: sales@lifefitnessjapan.com
**Latin America and Caribbean***
Life Fitness, Inc.
Columbia Centre III
9525 West Bryn Mawr Avenue
Rosemont, IL 60018 U.S.A.
Telephone: (847) 288 3300
Service Email: customersupport@lifefitness.com
Sales/Marketing Email: commercialsales@lifefitness.com
Spain
Life Fitness IBERIA
C/Frederic Mompou 5,1º1ª
08960 Sant Just Desvern Barcelona SPAIN
Telephone: (+34) 93.672.4660
Service Email: servicio.tecnico@lifefitness.com
Sales/Marketing Email: info.iberia@lifefitness.com
Hong Kong
Life Fitness Asia Pacific LTD
32/F, Global Trade Square
21 Wong Chuk Hang Road
Hong Kong
Telephone: (+852) 2575.6262
Service Email: Service.HK@lifefitness.com
Sales/Marketing Email: hongkong.sales@lifefitness.com
EUROPE, MIDDLE EAST, and AFRICA (EMEA)
Netherlands and Luxemburg
Life Fitness Atlantic BV
Bijdorpplein 25-31
2992 LB Barendrecht
THE NETHERLANDS
Telephone: (+31) 180 646 666
Service Email: service.benelux@lifefitness.com
Sales/Marketing Email:
marketing.benelux@lifefitness.com
Belgium
Life Fitness Benelux NV
Parc Industrial de Petit-Rechain
4800 Verviers BELGIUM
Telephone: (+32) 87 300 942
Service Email: service.benelux@lifefitness.com
Sales/Marketing Email: marketing.benelux@lifefitness.com
All Other Asia Pacific countries and distributor **business Asia
Pacific***
32/F, Global Trade Square
21 Wong Chuk Hang Road
Hong Kong
Telephone: (+852) 2575.6262
Fax: (+852) 2575.6894
Service Email: Service.AP@lifefitness.com
Sales/Marketing Email:
Marketing.HK.Asia@lifefitness.com
*Also check www.lifefitness.com for local representation or distributor/dealer
User and Service Documents Link
https://www.lftechsupport.com/web/document-library/documents
Additional information is available online using the link above.
Life Fitness® is a registered trademark.
Gym Wipes® is a registered trademark of the 2XL Corporation. PureGreen 24 is a
trademark of Pure Green.
© Copyright 2020, Life Fitness, LLC. All Rights Reserved. Life Fitness, Hammer
Strength, Cybex, ICG and SCIFIT are registered trademarks of Life Fitness, LLC
and its affiliated companies and subsidiaries. Brunswick and related
trademarks used under license from Brunswick Corporation. Disclaimer: Images
and specifications are current as of the date of publication and are subject
to change.
Columbia Center III – 9525 West Bryn Mawr Ave, Rosemont, IL 60018 •
800-351-3737 •
847-288-3700 • FAX
800-216-8893
www.cybexintl.com • 1015902-0001 AA • 2020
Safety
Safety Information
It is the sole responsibility of the purchaser of Life Fitness Family of Brands products to read the owner’s manual and warning labels and instruct all individuals, whether they are the end user or supervising personnel, on proper usage of the equipment.
UNDERSTANDING EACH AND EVERY WARNING TO THE FULLEST IS IMPORTANT. IF ANY OF THESE WARNINGS ARE UNCLEAR, CONTACT Life Fitness Family of Brands CUSTOMER SERVICE IMMEDIATELY AT 1-800-351-3737.
This equipment is categorized as class S per EN ISO 20957-1. As such this equipment is only intended for commercial, institutional and/or studio facilities. It is not intended for home use. Contact Life Fitness Family of Brands with any questions regarding this classification.
It is recommended that all users of Life Fitness Family of Brands exercise equipment be informed of the following information prior to use.
Operating Warnings
**WARNING:** This product can expose you to chemicals including Methyl Isobutyl Ketone, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov
- It is the purchaser’s sole responsibility to properly instruct its end users and supervising personnel as to the proper operating procedures of all equipment.
- This equipment is not intended for use by children. Keep children under the age of 13 away from the machine.
- Do not allow users to wear loose fitting clothing or jewelry while using equipment. It is also recommended to have users secure long hair back and up to avoid contact with moving parts.
- All bystanders must stay clear of all users, moving parts and attached accessories and components while machine is in operation.
Access Control
- Life Fitness Family of Brands recommends that all commercial fitness equipment be used in a supervised area. It is recommended that the equipment be located in an access controlled area. Control is the responsibility of the facility owner.
Installation
- Life Fitness Family of Brands recommends that all equipment be secured to a solid, level surface to stabilize it and eliminate rocking or tipping over. This must be performed by a licensed contractor. See Bolt to Floor Guide for installation procedure.
Proper Usage
- Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that Life Fitness Family of Brands equipment is used properly to avoid injury.
- Injuries may result if exercising improperly or excessively. It is recommended that all individuals consult a physician prior to commencing an exercise program. If at any time during exercise you feel faint, dizzy or experience pain, STOP EXERCISING and consult your physician.
Inspection
- DO NOT attempt to use or repair any accessory approved for use with the equipment which appears to be damaged or worn.
- DO NOT use or permit use of any equipment that is damaged and/or has worn or broken parts. For all Life Fitness Family of Brands equipment use only replacement parts supplied by Life Fitness Family of Brands.
- Maintain labels and name plates – Do not remove labels for any reason. They contain important information. If unreadable or missing, contact Life Fitness Family of Brands customer service for a replacement.
- Equipment Maintenance – Preventative maintenance is the key to smooth operating equipment as well as to keep your liability to a minimum. Equipment needs to be inspected at regular intervals.
- Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. Life Fitness Family of Brands will provide service and maintenance training at our corporate facility upon request or in the field if proper arrangements are made.
- Before use, examine all accessories approved for use with the Life Fitness Family of Brands equipment for damage or wear.
Plate Loaded, Free Weight, and Body Weight Systems
- Never exceed the load rating for any plate loaded station, body weight station, bench or other free weight device; including specific weight rod and band peg limits. See machine specific section for load limit information.
- Contact a Life Fitness Family of Brands representative with any questions regarding proper weights and loading
Warnings and Cautions
- Warning labels indicate a potentially hazardous situation that could result in serious injury or death if the precautions are not observed.
- Caution labels indicate a potentially hazardous situation that could result in serious injury or damage to machine if the precautions are not observed.
- Contact Customer Support Services to replace any worn or damaged labels.
Product Labels
General Warning
Serial Number
Label Locations
Assembly
Component and Hardware List
Tools Required
- 17 mm Socket wrench
- 8 mm Allen wrench
- Torque wrench
- Rubber mallet
Assembly Procedure
Assemble Frame
- Install bolts, washers, and hex nuts securing right and left feet to frame using an 8mm Allen wrench and 17mm wrench.
- Place connection tubes in between uprights.
- Install bolts, washers, and hex nuts securing uprights and hook plates to frame using an 8mm Allen wrench and 17mm wrench.
- Tighten all bolts to 20-25 ft-lb (27-33 Nm).
- Install hole plugs to right and left feet using a rubber mallet.
Product Information
Specifications
Maintenance Procedures
Maintenance Schedule
Wax
- Frames with a standard, non-abrasive, wax finish.
Inspect
- Hardware. Check for loosening. Tighten as required.
- Frames. Inspect for wear and damage.
- For paint chips. Fill in immediately with manufacturers touch-up paint.
Once a Week
- Visually inspect all hardware for loosening, tampering or wear.
Once a Month
- Inspect hardware on all machines and tighten any bolts or nuts that may have loosened over the life of the product.
Notes
- Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary.
Approved and Compatible Cleaners
Two preferred cleaners have been approved by reliability experts: PureGreen 24
and Gym Wipes. Both cleaners will safely and effectively remove dirt, grime
and sweat from equipment. PureGreen 24 and the Antibacterial Force formula of
Gym Wipes are both disinfectants that are effective against MRSA and H1N1.
PureGreen 24 is available in a spray which is convenient for gym staff to use. Apply the spray to a microfiber cloth and wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for fungus and viral control.
Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes on the equipment for at least 2 minutes for general disinfection purposes. Contact Customer Support Services to order these cleaners (1-800-351-3737 or email: customersupport@lifefitness.com).
Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior surfaces. Use a soft microfiber cloth only. Apply the cleaner to the microfiber cloth before cleaning. DO NOT use ammonia or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the equipment surfaces.
Removal of Paint, Marking Pens, or Labels
- Butyl cellosolve works well for removal of paints, marking pen inks, lipstick, etc.
- Labels, stickers, etc. may be removed using kerosene. When the solvent will not penetrate sticker material, apply heat (hair dryer) to soften the adhesive and promote removal. GASOLINE SHOULD NOT BE USED.
Warranty
What is Covered
This Life Fitness Family of Brands commercial exercise equipment product is
warranted to be free of all defects in material and workmanship.
Who is Covered
The original purchaser or any person receiving the product as a gift from the
original purchaser.
Who Pays Transportation and Insurance For Service
If the Product or any covered part must be returned to a service facility for
repairs, We, Life Fitness Family of Brands, will pay all transportation and
insurance charges for the first year. You are responsible for transportation
and insurance charge after the first year.
What We Will Do To Correct Covered Defects
We will ship to you any new or rebuilt replacement part or component, or at
our option, replace the Product. Such replacement parts are warranted for the
remaining portion of the original warranty period.
What is Not Covered
Any failures or damage caused by unauthorized service, misuse, accident,
negligence, improper assembly or installation, debris resulting from any
construction activities in the Product’s environment, rust or corrosion as a
result of the Product’s location, alterations or modifications without our
written authorization, or by failure on your part to use, operate and maintain
the Product as set out in your Operation Manual.
All terms of this warranty are void if this product is moved beyond the continental borders of the United States of America (excluding Alaska, Hawaii and Canada) and are then subject to the terms provided by that country’s local authorized Life Fitness Family of Brands representative.
Owner’s Manual
It is VERY IMPORTANT THAT YOU READ THIS MANUAL before operating the Product.
Remember to perform the periodic maintenance requirements specified in the
Manual to assure proper operation and your continued satisfaction.
Exclusive Warranty
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER
OBLIGATIONS OR LIABILITIES ON OUR PART. We neither assume nor authorize any
person to assure for us any other obligation or liability concerning the sale
of this Product. Under no circumstances shall we be liable under this
warranty, or otherwise, of any damage to any person or property, including any
lost profits or lost savings, for any special, indirect, secondary, incidental
or consequential damages of any nature arising out of the use of or inability
to use this Product. Some states do not allow the exclusion or limitation of
implied warranties or of liability for incidental or consequential damages, so
the above limitations or exclusions may not apply to you. Warranty coverages
and terms may differ outside the United States. Please contact the Life
Fitness office servicing
your country (contact information found at the front of this manual) or visit
the applicable local Life Fitness website to receive the specific warranty
information for your country.
Changes in Warranty Not Authorized
No one is authorized to change, modify or extend the terms of this limited
warranty.
Effects of State Laws
This warranty gives you specific legal rights, and you may have other rights
which vary from state to state and country by country.
Warranty Coverage
NOTE: There is no warranty coverage for labor on Strength Products.
Bolt to Floor Guide
Introduction
Cybex designs its products to be stable when used as designed. Because strength training is dynamic, we cannot predict how users will ultimately use the products in all circumstances. Therefore, Cybex recommends that strength training equipment be secured to a solid, level surface to stabilize and eliminate rocking or tipping over.
Each new unit shipped comes with a multi-language hangtag stating the importance of bolting the unit down as a safety precaution.
It is the facility’s responsibility to adhere to local and regional building codes.
Delivery and Installation Tips
All Anchors
-
Fasteners must have minimum embedment in concrete floor, not including screed, regardless of wood/tile/rubber over sub-floor. (See Anchor Types for maximum sub-floor thickness between unit and concrete to equipment foot must be made of flooring or
other material (i.e. no air gaps)). -
DO NOT reuse fasteners. Static and Dynamic anchors are designed for one-time use only.
-
Factor in equipment’s feet height when selecting fastener length.
-
Factor in flooring thickness when selecting fastener length.
-
It is also recommended to drill an additional 1/2” (12.7 mm) of depth beyond the length of the fastener being used to ensure that debris does not block the entry of the anchor.
-
Minimum concrete compressive strength: 3000 psi (20 N/mm2).
Anchoring
- All anchors must have a minimum embedment into concrete, regardless of wood/tile/rubber/screed over sub-floor.
- Dynamic anchors must have a minimum embedment depth in concrete to ensure maximum security and pull out force. See Anchor Types for embedment depth minimums.
Building Codes
It is the facility’s responsibility to adhere to local and regional building
codes. Please verify with the customer to ensure that they are aware of this.
Carpeting
If bolted down to carpet flooring, be sure to use a box cutter knife to cut
the carpet threads around each foot. This will help avoid the carpet threads
from being wrapped around and pulled by the drill bit.
Competitor Product
The bolt down guidelines and procedures for Cybex products were determined by
the company’s Engineering and Installation Development groups. These
guidelines include which anchors to use and positioning of the anchors are
required for Cybex product.
- Cybex does not have that level of specification or engineering input for competitive product.
- Cybex installation teams are not permitted to anchor competitor equipment.
Drilling
It is also recommended to drill an additional 1/2” (12.7 mm) of depth beyond
the length of the fastener being used to ensure that debris does not block the
entry of the anchor.
- This can be done by marking your drill bit with a piece of tape.
- While it is recommended that a vacuum be used to clean up debris, this will not account for all the debris that will settle at the bottom of the drilled hole.
Pullout Force
Cybex specifies Hilti™ static and dynamic anchors. According to the anchor
manufacturer, the recommended design pullout force (in tension) for the
specified anchors, when properly installed in cracked concrete, is provided in
the side table. This table should be used for reference only; for additional
and up-to-date information on the anchor capabilities or the design pullout
force in other substrates, please consult Hilti directly at
https://www.us.hilti.com
- Design strength extracted from the Hilti Anchor Fastening Technology Manual issued September 2014.
Tools Required
WARNING: Adhere to manufacturer’s equipment warnings and guidelines.
Follow manufacturer’s instructions for proper usage.
Static Anchor
- Floor scanner / rebar detector (optional)
- 1” L-shape SDS rotary hammer
- 1/4″ x 12″ (6mm x 305mm) carbide drill bit (for 1/4” (6mm) anchors)
- 3/8″ x 12″ (8mm x 305mm) carbide drill bit (for 3/8” (8mm) anchors)
- Safety glasses
- Extension cord
- Impact wrench
- Vacuum (for debris)
Static Anchor Procedure
CAUTION: If it is possible that the length of your bolt will not provide
the minimum requirement of 2.5” (63.5mm) of engagement, a longer anchor should
be used.
- Place unit into position to be mounted and cycle unit to set stance.
- Each foot must get at least one static fastener.
- Wearing protective glasses, drill down into the flooring to the required depth as perpendicular as possible, ensuring that the foot thickness is being accounted for; refer to Anchor Selection and Foot Dimensions.
- Insert fastener and tighten to 18 Foot-Pounds (24Nm) for 1/4” (6mm) anchor or 40 Foot-Pounds (54Nm) for 3/8” (8mm) anchor.
NOTE: If the legs/frame do not contact the mounting surface DO NOT pull down with the fastener or anchor. Loosen frame hardware and re-tighten to allow machine to align.
Foot Dimensions
Use below image to determine foot specifications.
Columbia Center III – 9525 West Bryn Mawr Ave, Rosemont, IL 60018 •
800-351-3737 •
847-288-3700 • FAX
800-216-8893
www.cybexintl.com
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>