BLAUPUNKT IP54 Ceiling Lamp LED User Manual
- June 6, 2024
- Blaupunkt
Table of Contents
User Manual
Enjoy it.
INSTALLATION GUIDE
THANK YOU for buying this product. То help ensure IT gives complete
satisfaction please install it according to these instructions and then pass
the instructions to the appropriate person for retention and future reference;
**IMPORTANT SAFEТY INFORMATION;
**
- Please turn off the power before cleaning the light fitting, and use dry and soft fabric, don’t use chemical or corrosive things;
- Ensure the product is intact before installation;
- Avoid looking at the LED light-emitting area directly;
- A non-professional person is prohiЬited dismantling and repairing, we won’t provide the replacing ог repairing service for products which have been privately dismantled and repaired;
- The distance between the products and inflammaЫe material should at least Ье 0.2m;
- Ensure the wire of power supply is long enough, avoid big tension, don’t tie а knot, don’t mix up the output wire
- Don’t use the professional LED panel driver for another lighting;
- Avoid electric shock, make sure the power is turned off before connecting this lamp to AC220V;
- Select the suitaЫе driver before use, don’t touch the lamp surface when it is lighting оп;
INSTALLATION
1. Remove the lamp, rotate the back to the right to install the ceiling bracket, and take it out.
2. Power off, open the 6mm hole in the ceiling, drive into the plastic expansion tube, and then lock a screw to position, do not lock the screw, leave 3~4mm space and snap into the bracket mounting hole then lock another screw, both sides The screw is locked and the ceiling bracket is fixed.
3. Connect the electricity.
4. After replacing the waterproof cover, roughly align the ceiling bracket
and the mounting groove of the buckle and the lamp body, and push it up hard.
After the “click” sound is heard, the installation is completed. (Be sure to
check if the four corners are ushed, the normal distance between the lamps and
the ceiling is 4mm). The left side of the lamp body rotates to tighten the
right hand and remove the lamp.
5.
Installation is complete, power on.