Jelly Comb MS037 Wireless Mouse 2-In-1 2.4GH User Manual
- June 6, 2024
- Jelly Comb
Table of Contents
Jelly Comb MS037 Wireless Mouse 2-In-1 2.4GH User Manual
Overview
- Left button
- Scroll wheel & Middle
- Power button
- Battery box
- TYPE C receiver
- Backward
- Green TYPE-C LED light
- Right button
- DPI switch button/ 1000-1500-2000-2400d pi
- Switch between USB and type-c receiver
- USB receiver
- Forward
- Red USB LED light
- Low battery LED light
Set up 2.4 GHZ Wireless Mouse
-
Install the battery(Please notice the place of anode )and cathode. )
Switch power button to “on”
Note: One AA Battery is needed ( not included in the package) -
Take out the receiver
-
Insert the receiver into the USB port of PC. The driver will be installed automatically for a few seconds. After installation is done, the mouse is connected successfully
Set Up Mouse
In window system (e.g win 8)
-
Install the battery(Please notice the place of anode and cathode .)
Switch power button to “on”
Note: One AA Battery is needed ( not included in the package) -
Take out the receiver
-
Insert the receiver into the TYPE-C port of Macbook The driver will be installed automatically for a few seconds. After installation is done, the mouse is connected successfully
Switch Between USB and Type – C Mode
- The factory setting of this mouse is USB mode.
- Press the switch button on the base of the mouse to switch mode: Green led lights indicates for Type-C mode, Red led light for USB mode.
- No auto switch. Before you switch mode, please make sure you press the switch button.
Date Parameter
Basic:
- Engine: Optical
- Mouse Resolution: 1000-1500-2000-2400dpi
- Mouse key life: Above 3 millions
- Mouse Size: 103x70x32mm
- Mouse weight: 70g
2.4G Basic:
- Distance: 10m
- Voltage: 1.5V
- Current: 13.0 ± 0.5mA
- Mouse Polling Rate: 250Hz
- System requirement: Workable USB port Windows2XP, Windowst7, WindowsL 8,Windows210 or later Mac os X 10.10 or later
Package Included
- 2.4G Wireless mouse
- USB receiver
- TYPE C receiver
- User Manual