Jelly Comb YP012 Wireless Stereo Headphone User Guide

Jelly Comb YP012 Wireless Stereo Headphone

Welcome!
Thank you for purchasing the Jelly Comb Wlroess steroo Headphone System. Beforn operating the untt, please read this manual thoroughly and remain tt for future reference.

Some feature& are:

• Wireless transmission lets you enjoy 1V or music without the rastriction of a cord
• Up to 66-99 feet reception range upon an open ground
• Compact, foldabla and portable
• Can use “ONE TO MANY” and all of the headphones can connect to the same sender.
• Hassle-free recharging by simply connecting the headphones to a fN output pr:N{8r supply with USB port, no need to ctlange the batteries. With the 3. 7V bull-in lithium battery, you can enJoy a longer playing time of 8-10 hours once !Ult,, charged.
• Automatically g00s into mute mode when there is no signal or if beyond the affective range
• Easy comection to 1V and Audio system equipment
• Enhanced clarity af sound with minimal transmission noise by use of noise reduction technology
• Headphones eutoma1icallyturn off when there is no signal within 5 minutes

Notes on receiving performance

this system utilizes specI crequency signals In the 109MIW110MHZ band so the receiving performance may de!Eriorate due to the surroundings. lhe following examples illustrate conditions that may reduce the reception range or cause lnterterence.

• Inside a building with wi.ls containing steel beams.
• AA area with many steel fie cabinets, 81c.
• An area with many electrical appliances capable of generating electromagnetic fields.
• Toe transmitter is placed on a metal instrument.
• AA area facing a roadway.
• Noise or interfering signels exist in the surroundings due to radio trarooeivera in trucks, etc.
• Noise or interfering signals exist in the surroundings owing to v.ireless communication systems installed along roadways.

Product layout:

Opratlng the S,atem

Salllng up the transmitter Connect tha tra11111ltlar IO audlaMdeo equipment.

1. Plug the N:, power adap1or to a power source, the POWER indicator glows blue, then set the CHANNEL selector swi1ch to A or pooition (both ara fine for signal receMng).
2. VVhen use two transmitters at the same time in the same place, please make sura the channel of each transmitter is different in ord..to avoid signal interfaranca.
3. Plug one side of the audio cable to the transrritter, and insert the other side into the audia/\/ideo equipment.
4. Audio cable functions as the transmit antenna
5. Alter you char,;ie the channel afthe transmitter, pre66 the POWERswitch of the headphone once to switch to corresponding type of channel.

Note:

• Refer to documentations of a connected component tor details about the specifications or the settings for audio out jacks
• Use only the supplied AC power adaptor. Do not use any other N:, power adaptor.
• When the transmitter is plaoed on or near a 1Y, it may pick up a noise. In such a case, place the transmitter away irum the lV.

Operating the headphone

Wireless Mode

1. Press and hold the POWER switch for about 0.5 seconds to turn on the headphones, then POWER indicator glows blue. Press the POI/VER smch once, then it wll search for the signal automatiraly. Whan you change the channel af the transmitter, press POWER switch of the headphone once for frequency shift.
2. Prass Volume UP button to ircrease the volume. Press ValLine DOWN button to d8Cr88SS the volume.
3. Whan power Is on, press and hold POWER switch for 1 second to turn it off.

Wired mode/ Charging the headphones

1. VVhen connect the h8adphona to an audia/llideo equipment directly with an audio cabkl, make sure it is powered off when used.
2. When charging the headphone,the POWER indicator glows red, and It will tum off when !Ully charged. Do not use the headphone whle charging.

Sending slgnal & from the transmitter
The transmitter starts sending signals automatically when It detects an audio signal from the connected equipment. If the audio signal is very weak, the transmitter does not send signals. It will start sending the signals v.tien the transmitter receives an audio signal again. ~ the transmitter Is corviected lo a headphone Jack, make sure the  volume of the equipment connected Is set to the position which Is higher than normal setting.

Troubleahootlng:

No sound/Muffled sound

1. Check whether the switch of transmitter is turned to A or B
2. Check the connection of the audio/video equipment or the AC power adaptor.
3. Check thro the audio/video equipment Is turned on
4. Tum up the volume on the connected audio/video equipment, If the transmitter is connected to the headphones jack
5. When headphone used as a wired one with Muffled sound (connect the headphone directly to the audo/video equipment) check the power of tt, and make sure It is powered off when used
6. W’hen there is static when headphones is near ths transmitter

Precautions

1. the headphones can not be powered an, please fully charge the headphones before tum It an.
2. Ta expand the Ille of battery, please tum It off When you don1 want to use It.
3. When first use the headphone, please charge it at least 4 hours.4 . Please charge periodically if the headphone is not to be used 1or e long period of time.
4. If the transmitter is not to be used for a loog petiod af time, disconnect the AC power adaptor from the AC outk,t by holding the plug.
5. Do not pull the cord.
6. Do not leave the wireless stereo heedphone system in e location subject to direct sunlight, heel or moisture .
7. Non professionals do not disassemble the machine.
8. When headphones can not be turned on, ploose charge the headphones

Notes on headphones

To reduce the risk of hearing damage
Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a rir,;iing in your ears, redunce the volume or disccntinue use.\

Caring for others
Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you. Ir you have any questions or problems concemir,;i the system that ere not covered in this menLEI, please consult our customer service.

Specifications:

General

• carrier frequency : 109MHz, t 10MHZ
• Channel: A. B
• Frequency response :100HZ-15000HZ

Transmitter

• Power souroe :
• DC 1 OOV-24(JI! : supplied AC/DC power adapter
• Audio Input : Phone Jacks
• Dimensions : Approx. 4.6 x 2.6 x 0.6 Inches

Headphones

• Power source: 3.7V built-In lithium battery

Package included

• 1 x transmitter
• 1 x headphone
• 1 x 3.5mm audio cable
• 1 x 3.5mm stereo female to RCA male connector
• 1 x AC/DC adaptor
• 1 xUSBcable

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>