Jelly Comb MS057 2.4GHz+ Bluetooth+Bluetooth Reachargeable RGB Backlit Mouse User Manual

User Manual
2.4GHz+ Bluetooth+ Bluetooth Rechargeable RGB Backlit Mouse

MS057

Product Features

A Left Button
B Right Button
C Scroll Wheel
D 2.4GHz USB Mode Indicator
E Bluetooth 1 Indicator Light
F Bluetooth 2 Indicator Light
G Rechargeable Indicator Light/ Low Battery Red Indicator Light/ DPI Blue Indicator Light
H Mode Switch Button/Bluetooth Pairing Button| I USB Receiver
J USB Charging Port
K Power Switch
L DPI Switch Button
M Forward
N Back
O Lighting Effect
P LED Button
---|---

Short press to turn on/ switch lighting effect, Long press to turn off lighting effect.

Notice:
Turn on the power switch, the backlit will be on for 5 seconds and then off when there is no connection. The backlit will be on when the mouse is connected to the computer. When the mouse is left for 30 seconds without operation, the backlit will go to sleep mode, and moving the mouse will wake up the backlit within 30s-30mins. When there is no operation for 30 minutes, both the mouse and the backlit will sleep in mode. At this time, waking up the mouse will also wake up backlit.

Lighting Modes:

1. Neon
2. Colorful streamer
3. Cyclic breathing
4. Mixed color breathing With memory function

2.4GHz USB Connection

1. Turn on the power switch button.

2. Open the cover and take out the USB receiver.
   Notice: Buckle out the cover from behind first and then slide out.

3. Press the mode switch button until the 1 indicator light turns white, which means the mouse enters 4G mode.

4. Plug the USB receiver into the USB port on the computer.

Bluetooth Connection

1. Turn on the power switch button.
2. Press the mode switch button to switch to 2  or 3, and the white indicator light flashes slowly.
3. Long press the mode switch button for 3-5s until the white indicator light flashes quickly, which means that the mouse enters Bluetooth pairing mode. For Windows 10
4. Select “Bluetooth Device” on the computer.
5. Click “Add or Delete Bluetooth Device”.
6. Find the Bluetooth named “BT + 2.4G Mouse” and click to pair.
7. Successfully connected the “BT + 2.4G Mouse”.

For Mac OS
Refers to Bluetooth Mode Installation Steps 1, 2, and 3 before pairing.

1. Find “System Preferences” on Mac.
2. Select “Bluetooth” in System Preferences.
3. Find the Bluetooth named “BT + 2.4G Mouse” in the list and click to pair. And the mouse will work.

For iOS

• Mouse Function is available only in the iOS 13 or above system.
  Refers to Bluetooth Mode Installation Steps 1, 2, and 3 before pairing.

  1. Enter “Accessibility” on “Settings” and choose “Touch”.
  2. Find “Assistive Touch”.
  3. Turn on “Assistive Touch”.
  4. Select “Bluetooth” on “Settings” and turn it on.
  5. Find the Bluetooth named “BT + 2.4G Mouse” in the list and click to pair.
  6. When it shows as “Connected”, the mouse will work.

For Android
Refers to Bluetooth Mode Installation Steps 1, 2, and 3 before pairing.

1. Click “Setting” on the device and turn on the Bluetooth.
2. Find the Bluetooth named “BT + 2.4G Mouse” in the list and click to pair.
3. When it shows as “Connected”, the mouse will work.

Mode Switch Method

After BT1/ BT2/ USB Receiver is successfully paired or connected, short press the mode switch button to easily switch from different modes.

Short press the mode switch button and easily switch between 3 devices.

Charging Function Guide

1. When low voltage indicator light and channel indicator light flash quickly, once a second for 10 times, it warns that the battery is very low, please charge the mouse with a charging cable. The indicator light is red while charging and off after fully charged.
2. The red light turns on when connecting the charging cable to the USB port on the computer for charging, The charging process is about 1-3 hours, the battery indicator light turns off when fully charged.

Specification

Basic Specification:
Chip: Nordic NRF51802W
Engine: Optical
Mouse DPI: 1000-1600-2400 DPI
Mouse Button Life: Over 3 million times clicks Mouse Size: 114.6 x 64.4 x 38mm
Mouse Weight: 95g

2.4G Transmission Specification:
Transmission distance: 10 meters
Working Voltage: 3.7V
Working Current: 5.5mA
Mouse Polling Rate: 250Hz
System Requirement:
Available USB port;
Windows XP/ 7/ 8/ 10 or later; Mac OS X 10.10 or later.

Bluetooth Transmission Specification:
Transmission distance: 10 meters
Working Voltage: 3.7V
Working Current: 4mA
Mouse Polling Rate: 125Hz
System Requirement:
Bluetooth-enabled Device;
Windows 8 / 10 or Later; Mac OS X 10.10 or Later; Android 4.3 or Later.

Package Contents

• Wireless Mouse
• USB Receiver
• USB Charging Cable
• User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>