Jelly Comb Comb Video Conference Lighting Kit Instruction Manual

Video Conference Lighting Kit
Operation Instruction

Thank you for purchasing Jelly Comb products.
LED-X112 is a professional light kit for video conference, zoom calls, self broadcasting, and live streaming. It s portable, durable, and precise in dimming. It can be widely used for lighting control of photography and video.

Warnings

1. Please keep it dry. Do not touch this product with wet hands. Do not immerse the product in water or expose it to rain.
2. Keep it away from children.
3. With a built-in lithium battery, prohibit disassembly, impact, extrusion, or Put into the fire.
4. Do not use it in the presence of flammable gases, otherwise may cause an explosion or fire.
5. Do not use store or charge the battery in a high-temperature environment or in a closed space under direct sunlight. The product cannot be used at an ambient temperature of more than 35degrees.
6. Please use the specified charger to charge the battery and use it within the specified voltage and temperature range in accordance with the correct operating instructions.

Precautions

1. After charging is complete, unplug the power cord.
2. If you have not used the product for a long period of time, charge the battery before using the product again. Otherwise, the product cannot be turn on without power.
3. In order to prolong the service life of the battery, it is recommended to charge and maintain it every three months.
4. This product has a built-in rechargeable lithium battery which has a certain life limit. After using it for a certain period of time, the performance will be reduced but it is a normal situation.

Product Overview Interface Icon

 Icon Explanation

1. The battery remaining time icon, the remaining time is the predicted remaining use time.
2. Switch Icon, switch icon can move up and down, you can press the +/ – button to adjust relative data according to the Icon place.
3. Color Temperature Display shows the current color temperature value.
4. Brightness Display shows the current brightness percentage.
5. Battery Display shows the remaining battery life.
6. High-temperature warning sign: When the ambient temperature is too high or continuously use for a long time, it will forcibly turn off the light, later it can be restarted after the temperature recovers.
7. Low-temperature warning icon, if the ambient temperature is too low, the product may be abnormal and the warning icon will appear.
8. Charging icon: When the charging power is connected, the icon will be displayed. When the charging is off, the charging will display the percentage of charging. When charging is completed, it will display 100% (this charging percentage is estimated by the circuit, please refer to the use).
   ■ Warnings: In non-emergency situations, it is not recommended to use while charging. It will cause the brightness of the product to turn dark and rapid heat generation to cause power off or other abnormal conditions;

 Operation Instructions

1. Turn on/off the power Press and hold the power/switch key for 2 seconds to turn on the power or turn off the power.LED lights up after power on, default is 3200K 1%.

2. Brightness, Color temperature adjustment
   • Short press the power/switch button after power-on, which can be used to adjust the brightness and color temperature.
   • + button to increase the brightness or increase the color temperature value.
   • -Button to decrease the brightness or decrease the color temperature value.

3. Lightness Adjust After turning on the power, shortly press the power switch button and point the adjustment icon to the brightness area, the brightness can be adjusted by pressing the +/- button. Each time you press the +/ – button, the brightness increases or decreases by 1%. Hold and press the button up and down, the brightness can continuously increase or decreased with the range from 1%400%.

4. Color temperature adjustment After turning on the power, shortly press the power/switch button, point the adjustment icon to the color temperature adjustment, and the color temperature can be adjusted by pressing the +/- button. Each time you press the + / – button, the brightness increases or decreases by 100K. Hold and dial the button up and down, the color temperature can continuously be increased or decreased in the range from 3200k-5500k.

Product Specification

1. Color temperature range: 3100K-5500K(1 250K)
2. Color rendering: Ra>96
3. Dimming range: 1-100%
4. Lamp beads number: 112 (double color temperature)
5. Lithium battery: 3.7V 1500mAh
6. Charging time: About 160 minutes
7. Charging Port: Micro USB
8. Battery Life: 100%5500K power continue output for about 55 minutes
9. Charging power supply: 5V1A
10. Maximum power: 5.5W (double color temperature)
11. Ambient temperature: -10 to 35 degrees, storage temperature -10 to 60 degrees
12. Product dimension: 112.8 60 10 mm 13. Product weight: 112.3 g

Package List

• 1 X LED-X112 Video Light
• 1 X Suction Cup
• 1 X Mini Tripod
• 1 X Soft Mask
• 1 X USB Charging Cable
• 1 X Manual Instruction
• 1 X Cold Shoe Screw

After-Sales Services

Warranty time: 12 months from the date of purchase. Free Service: If any questions, please kindly feel free to contact us at:
support@jellycomb.comhttps://www.jellycomb.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>