Moes WS-DL-EUB-BK-EN Water Heater Switch User Manual

: June 6, 2024
: MOES

Table of Contents

Installation
Diagram wiring
WiFi Version Water Heater Switch Notes on Network Setting
Zigbee Version Water Heater Switch Notes on Network Setting
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Water Heater Switch
USER MANUAL

|
---|---

Alexa TUTORIAL
http://qr03.cn/DpgQc2

Google Home TUTORIAL
http://qr03.cn/DOUP2j

Notes Before Installation

Wi-Fi only support a 2.4GHz network (802.1 b/g/n)
Only support one way/single pole circuit, not compatible with 3-way
Neutral wire is required.
Basic electrical wiring knowledge or experience is required, or please consult a professional electrician
ON/OFF button also can be used as a reset button. long press to reset your smart switch to factory defaults only do this if you are sure you want to erase all your settings

How to download APP?
Scan the QR code below or search Smart Life in IOS APP store or Google play.

IOS & Android System
http://e.tuya.com/smartlife

How to Register and Login

Download or scan the QR Code and install Smart Life APP
Once download or Scan the QR Code, there would be a registration request
Enter your phone number or email which you prefer and select the country you live in.
Obtain veriﬁcatiion code
Enter veriﬁcation code
Set password
Creat family
Enter the family name and select the room
Family created successfully

Installation

Separate the upper and lower parts from the switch by a screwdriver.

(Noted: Distinguish between each corresponding slot)

|

(Noted: Distinguish between each corresponding slot)

---|---

Diagram wiring

Neutral wire.
Live wire.
Switch.
Water Heater.
Neutral wire.
Live wire.
Switch.
Water Heater.

WiFi Version Water Heater Switch Notes on Network Setting

3. 1. The device will automatically go into the pairing mode after energizing. When Indicator Light ﬂashes fast (about 3 times per second), the device can be connected to the router.
3.2. The device turns the pairing mode but the Indicator Light will remain bright if it doesn’t connect to the network in 3 minutes； Please long press (about 10 seconds) any button until Indicator Light ﬂashes fast (about 3 times per second) to get into the pairing mode again.
3.3. Indicator Light ﬂashes slowly (about once every 3 seconds), which means the device is not connected to the network, please long press (about 10 seconds) any button until Indicator Light ﬂash fast again.
3.4. The Indicator Light will go out after having connected to the network.
3.5 WiFi Version Water Heater Switch pairing
3.5.1 First turn on Bluetooth on your phone

3.5.2 Power the switch on.
3.5.3 Open APP and click “Add Device” or upper right corner“+” there will be a pop-up: devices to be added, you can choose to add/do not add, or select“Switch (BLE)” to add.

3.5.4 Select“+” then enter the WiFi password.

3.5.5 Waiting for the connection till it ﬁnishes.

Zigbee Version Water Heater Switch Notes on Network Setting

How does APP connect with smart gateway devices fast?
4.1. Open the APP, click “Add Device”, click “on the wired gateway”, connect the gateway device to the power supply, and connect to the home router.

4.2 Please reset the gateway device, press the reset button for a long time until the indicator is on continuously.
4.3 First click“conﬁrm indicator light is on”, Then click the smart gateway link, make sure the cellphone and gateway are in the same network, so that APP could connect with the gateway device.
4.4 Device added successfully, click completed.

4.5 Zigbee Version Water Heater Switch pairing
Smart gateway and APP connection complete, how to connect to the switch?
4.5.1 Power the switch on.
4.5.2 The device turns the pairing mode but the Indicator Light will remain bright if it doesn’t connect to the network in 3 minutes； Please long press (about 10 seconds) any button until Indicator
Light ﬂashes fast (about 3 times per second) to get into the pairing mode again.
(Notice: After connecting the gateway, click “Add subdevice” ﬁrst and then “LED already blink”, you could see the status of the switch.)

4.5.3 Device connecting automatically, then click the devices which have been successfully added, rename the device and select the room then click “Done”(Attention: The name should use numeric and letters, don’t use special symbols)

4.5.4 Long press switch to edit switch name, (Attention: The name should use numeric and letters, don’t use special symbols)

How do I add family members?
Add Steps: Click “Me” at the bottom right corner, → click on “home management” → Click on the name of the family you have created → Into my family → Click “add member”, enter the name and account of the member → Member can be set as administrators → Click Save → Member added successfully

There would be a pop-up → Whether accept the invitation or not → Click accept the invitation → Back to the main page“My home” → Click the top left corner to switch to the main family name

Thank you for your support and purchase at Moes, we are always here for your full satisfaction, just feel free to share your great shopping experience with us.

If you have any other questions, please do not hesitate to contact us.

| @moessmart| | moes| | @moes_smart
---|---|---|---|---|---
| @moes_smart| | @moes_smart| | www.moes.net

WENZHOU NOVA NEW ENERGY CO., LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel:+86-577-57186815
Email:service@moeshouse.com

AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China

AG26