BliTZWOlF BW-WA3 Wireless Bluetooth 100W Speaker User Manual
- June 6, 2024
- Blitzwolf
Table of Contents
User Manual
BW-WA3
- CONTROL BUTTON
- TWS 3. EQ
- Play / Pause
- VOLUME –
- VOLUME +
- Mode CONTROL.
Specifications
Model | V5.0 |
---|---|
Supported Profiles | A2DP.AVRCP.HSP |
Communication distance | ≥10m |
Frequency Response | 20Hz-16000Hz |
Impedance | 4Ω+15% |
Call Time | 20 (70% volume) hours |
Music playing time | 12 (50% volume) hours |
Battery Capacity | 5000mAh |
Charging time | About 5 hours |
Input voltage | 5v/3A |
Maximum power | 100W |
size | 2409182mm |
waterproof level | IPX5 |
product weight | 1561g |
Instructions
| Features|
Function operation
---|---|---
| turn on|
Long press this button for 2 seconds, the speaker will enter the Bluetooth search state by default, search for BW—WA3, wait for the device to connect, the blue light flashes quickly
Bluetooth connection status| The connection is successful, The blue LED light
is on
turn off|
In the power-on state, press and hold this button for 2 seconds to turn off the Bluetooth speaker and the light goes out
| Mode CONTROL|
Short press this button to switch BT/SD/USB/AUX playback mode, and the corresponding status light is on
Disconnect Bluetooth|
Long press this button for 3S to release the Bluetooth connection forcibly
reset|
Long press this button for 8S to restore the factory settings, clear the previous operation memory, the blue light flashes
| TWS|
TWS pair box connection operation:
1. Turn on the two speakers (if there are other Bluetooth devices connected,
disconnect them so that the speakers are in the Bluetooth search state).
2. Press this button on one of the speakers and then you will enter the TWS
pairing mode when you hear the beep tone and the yellow light flashes;
3. After the pairing is successful, the yellow lights of the two speakers
will light up at the same time and there will be a beep. The blue light of the
main unit flashes quickly and waits for the mobile phone to connect, and the
blue light of the secondary unit goes out;
4. After the TWS is connected, the host is connected to Bluetooth, or the
host is plugged into the AUX to play the music sub-box and the corresponding
music will be played at the same time.
5. In the TWS connection state, press this button to release the TWS pairing
box connection, and the yellow light will go out with a prompt tone and return
to the normal state.
| Switch RGB| In the boot state, long press this button to turn on or off the
GBR light
Switch EQ state|
Power on the speaker defaults to the standard mode, click for light music and then click for heavy bass. Greenlight is light music, white light is heavy bass, and no light is the standard model.
| Play / Pause|
In the BT/SD/USB/AUX playback state, press this button to pause, and press it again to continue playing. When paused in the corresponding state, the corresponding light flashes slowly. For example, when paused in the Bluetooth state, the blue light is on. Steady on during playback
Call answer
| Press this key once when the call is incoming, you can answer the call. Blue
light is on
End the call|
Short press this button during a call to hang up the call Blue light is on
Incoming call rejection| When a call comes in, long-press the 2S button to
reject the call. Blue light is on
Tail number redraw| Double—click this key to redial the last number. Blue
light is on
Voice assistant| Long press 3S to start the voice assistant function. Blue
light is on
-
| Volume song|
When playing music, short pr this button to decrease the v by one step.
Previous piece|
When playing music, long pre button to switch to the prev song
+
| Volume up|
When playing music, short pr button to increase the volume one step.
Next song|
When playing music, long pre button to switch to the next
+-
| Forced reset|
Press the + and-keys at the time to force a reset when it crashes
| AUX|
Insert the 3.5mm audio cable, automatically play the music provided by AUX
| USB|
Insert the USB flash drive and automatically play the music from the USB flash drive
| SD card| Insert TF card to automatically play TF card music
| USB powered|
In the power-on state, plug in the charging cable to emergency charge external devices
MADE IN CHINA
SCHEUFER Technologies GmbH
Address:Hertleinstrasse 37,91052,Erlangen,Germany
E-mail:Mark.Zhang@scheufer.com
VISHTEC UK Co.,Ltd
Address:Unit G25 Waterfront Studios,1 DockRoad,London, E1 6 1 AH
E-mail:Vincent.feng@vish-tec.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>