BliTZWOlF BW-VP13 1080p WiFi Projector User Manual

: June 6, 2024
: Blitzwolf

Table of Contents

Function Overview
QUICK START
CAST SCREEN IPHONE(WIRED PROJECTION)
ANDROID MIRACAST
IPHONE AIRPLAY
CONNECT PROJECTOR TO YOUR HOME WIFI
INPUT SOURCE
Projection distance and screen size
Product Specification
TROUBLESHOOTING GUIDE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BliTZWOlF BW-VP13 1080p WiFi Projector

Function Overview

Power Button
Lens
Back
Menu
Input Source
Arrow Keys (down)
Arrow Key (left)
OK
Arrow key (right)
Arrow keys (up)
Keystone
Focus
Air Inlet
Filter
Air Outlet
Speaker

SD Card Slot
AV IN
HD2
HD1
USB
Audio Out
VGA
Power Input
Play /Pause
Power Button
Fast Reverse
Arrow keys (up)
Arrow key (left)
Back
Volume –
Mute
Fast Forward
Arrow key (right)
Arrow keys (down)
Input Source
Menu
Volume+

QUICK START

Plug the power cord into an outlet.
Take off the lens cover.
Press the Power Button to turn on the projector.
Select the correct input source by pressing the button.
Adjust the kickstand accordingly.
Adjust the keystone and ring to get the best image performance.
Press the Power Button twice to turn off the projector.
Installing the remote control battery,please use the remote control in the direction of the projector and playback screen.

CAST SCREEN IPHONE(WIRED PROJECTION)

Setp 1: Make sure the projector enters the CAST SCREEN page. Connect projector and iPhone by original USB data cable by USB input.

Step 2: Get “Trust” from iPhone by the first time, enter your password, same as unlock screen password.

ANDROID MIRACAST

Step 1: Make sure the projector enters the CAST SCREEN page. Turn on WLAN(WIFI) and mobile data on your phone.

Step 2: Enter your phone setting, turn on wireless projection and search ”PROJECTOR-XXX” then connect(more convenient to search the projector’s name directly).

MOBILE PHONES OF DIFFERENT BRANDS ARE REFERRED TO AS FOLLOWS:
Huawei: Wireless Projection/Multi-screen Interaction
Xiaomi: Wireless Display
SONY: Screen Mirroring
Samsung:Screen Sharing/Screen Mirroring/ Allshare Cast/Smart View

IPHONE AIRPLAY

Step 1: Make sure the projector enters the CAST SCREEN page. Please connect your phone with WIFI “PROJECTOR-XXXX”,password 12345678 and mobile data on your phone.

Step 2: Turn on your iPhone “Screen Mirroring”. Step 3: Search the projector’s name “PROJECTOR- XXXX”, and connect.
Note: Because of the copyright problems, some APPs such as Netflix may not support this function

CONNECT PROJECTOR TO YOUR HOME WIFI

When you need to upgrade the projector system and connect the projector to the network, you need to do this.

Enter your phone WLAN(WIFI) setting and search WIFl:PROJECTOR- XXXX, Password: 1 2345678.
Open your phone browser and input IP”192.168.49.1 “, then enter WIFI AP to scan WIFI.
Connect your home WIFI, when connect successfully, your home WIFI name wil l be on your projector.

INPUT SOURCE

Projection distance and screen size

The size in the figure is approximate and may be slightly different from the actual size. Please refer to the actual size.

Product Specification

Product Category	Home Theater Projector
Light Source	LED
Display technology	LCD
Display Chip Size	4.41″ TFT LCD
Lamp Life	40,000h
Operating System	No
Display Resolution	1920x1080P
Maximum Compatib le Resolution	1920x1080P
Contrast	3500:1
Throw Ratio	1.5
Keystone Correct ion	Manual Vertical + 15°
Focus Method	Manual
Aspect Ratio	16:9,4:3
Speaker Power	3W4O
Wireless Mirroring	Yes
Bluetooth Output	Yes
Installation Method	Front, Rear, Ceiling
Video Format	avi/ mp4/ mov/ mpg/ mpeg/ ts/ tp/ m2ts/ dat/ – flv/ swf/

TROUBLESHOOTING GUIDE

Blurry Image

Adjust focus ring/keystone.
The projector and the screen/wall must be vertical and within the effective distance.

Black Dots On The Screen

Use a lens cloth to clean the external lens.
Pat the projector gently and try to shake off the dust attached to the inside.
Open the label at the bottom of the machine and use a cotton swab to find the dust location and remove it.