BliTZWOlF BW-IS21 Smart PIR Greeting Doorbell User Manual

BlitzWolf® BW-IS21 Smart PIR Greeting Doorbell User Manual

What’s in the box

Motion Doorbell / Alarm Hub x1
USB Cable x1
User Guide x1

To know the product

1. Light ring
2. Motion detector lens
3. Volume / Power button
4. Wi-Fi Configuration / Work Mode button
5. Music down button
6. Power port
7. Adjustable holder

Light Ring

How to use

Before installation, it is recommended to successfully pair and familiarize yourself with the product before installing it. Long press the music button to restore the factory settings. The light circle will turn from flashing purple to purple, and it will be released with a beep, and the device will reset successfully after restarting.

Connect to the pairing APP

2.4ghz WIFI is required to connect the paired WIFl, and the password is entered correctly without special characters at the same time. The WIFI signal strength is high, and it is recommended to connect the paired WIFl. The distance between mobile phone and WIFl is close, and 5GHz WIFI does not support connection to this product.

1. Scan the QR code below to download the BlitzWolf APP

2. Register and log in.

3. Click add device and select Security Sensor-Alarm (Wi-Fi).

4. Long press the quick configuration button on the side of the device to make the purple indicator light flash quickly.

5. Enter the wifi password on the APP according to the prompts.

6. After a while, the APP will tell you that the device has been successfully added and the device name can be renamed.

7. In the Settings page, you can select the voice prompt language of the security host box.

8. When selecting accessories in the APP, 433MHz matching accessories can be added, which can only be operated according to the prompts of the APP. In pairing, the accessories need to be triggered to send signals to the security host for learning and adaptation.It is recommended to install after successful pairing and the test distance can trigger an alarm.

Install PIR infrared alarm

This product uses a USB power adapter to supply power all the time.
The installation location needs to consider the convenience of connecting to the power source.

Please test and familiarize yourself with product functions before installation. When installing, the human sensing surface of the infrared alarm must be parallel to the entrance door.

Installation on the ceiling.

Installation on the side wall.

HOW to ADD/PAIR WIRELEss sensors

All the wireless accessories in the package you purchased have been paired with the host before leaving the factory, and can be used normally after power on. If there is no pairing or you want to pair more accessories, you can easily add wireless accessories through the APP or the configuration button on the infrared alarm.

1. Click Accessories>+ on the APP device page; or keep pressing the music button on the infrared alarm until the light ring flashes purple and then release it.
2. Please trigger the wireless accessory within 20 seconds.
3. The infrared alarm will beep once, indicating that the pairing is successful. APP automatically refreshes the accessories list in the accessories bar.

Mode selection

Set welcome mode

Click Welcome on the APP device page, or click the Wi-Fi button (welcome mode button) on the infrared alarm until the light circle turns cyan. In the welcome mode, when a customer passes by, the voice prompt “Hello, welcome” (or the welcome music of your choice).

Set up smart welcome mode

Click Smart Welcome on the APP device page, or click the Wi-Fi button (welcome mode button) on the infrared alarm until the light circle turns green. In the smart welcome mode, if there are customers passing by, it will only prompt “Hello, welcome” (or the welcome music of your choice) once. That is, no one will pass by within 5 seconds after a reminder, and the reminder will be issued only when there are customers passing by after 5 seconds.

Regularly switch welcome mode/anti-theft mode

You can set multiple timing items through the “Settings>Timing” function of the APP to automatically set the working mode of the infrared alarm at the set time. Examples of use
If you want the infrared alarm to automatically greet guests at 8:00 in the morning and anti-theft at 21:00 in the evening, you only need to set two timing points on the APP, and the operation is as follows:
Step 1: Set the welcome timing point, click “Settings> Timing> Add Timing” on the APP device page, enter the timing setting page, adjust the timing value to 08:00, and check the repeat option
For the number of repeated days per week, select Welcome or Smart Welcome in the host mode option, and click Save to complete the setting
Step 2: Set the arming timing point, click “Settings> Timing>Add Timing on the APP device page. On the timing setting page, adjust the timing value to 21:00. In the repeat option, check the number of days to repeat each week. In the host mode option, select Outgoing Arming, and click Save to complete the setting.

About human flow statistics

• When customers enter and leave the store once, the flow of people increases once.
• You can use the APP to view today’s real-time traffic in the upper left corner of the device page.
• There will be errors in statistics, which are for reference only.

Traffic statistics information push
Step 1: On the APP device page, click Settings> Daily People Flow Push Time to set the push time.
Step 2: On the APP device page, click Settings> People Traffic Statistics Notification to turn on or off the people traffic push function.

Q&A

1. Can more accessories be supported?
   433Mhz security accessories can be supported. Different brands of accessories may have compatibility differences. Please refer to the actual situation.

2. Can it be used when there is no internet?
   It can be used, but the operation method is more complicated. In general, we recommend connecting to the Internet and opening the APP to experience more functions.

3. How long is the battery life?
   The battery is for emergency use only. If the battery is fully charged, it will be used for 1-2 hours after a power failure. Generally, we recommend connecting the Micro-USB power supply for long-term use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>