BliTZWOlF BW-WS03 Multi-Function Wi-Fi Weather Station User Manual

: June 6, 2024
: Blitzwolf

Table of Contents

What’s in the box
To know the product
How to use
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual
BW-WS03

What’s in the box

Indoor Weather Station1
Outdoor Full Function Sensor1
Screw Pack *1

To know the product

This product is a household weather station, non-professional special equipment, collecting weather data for reference only.If it may be damaged in bad weather, the damage caused by force majeure factors will not be guaranteed. Please pay attention to reasonable and safe use. It is suggested to take goad safety protection measures before sudden weather and move the product components to a safe position in time.

Indoor Weather Station
**** B1: Battery mode switch backlight, alarm mode into snooze, set mode exit Sattings.
B2: / Short press to adjust the brightness, long press to enter the satting mode, jump to the setting item.
B3: Short press to view the alarm clock time, long press to enter the alarm clock setting mode.
B4: Short press to view temperature and humidity records, long press to switch air pressure/light display mode, adjust the value when setting/
B5: Short press to view temperature and humidity records, long press to switch air pressure/light display mode, adjust the value when setting.
B6: Short press to view the wind speed record, long press to switch the wind speed and direction display mode.
B7: Short press to view the rainfall record, long press to switch the rainfall display mode.
B8: Short press to see the channel ID, long press to open or close the channel cycle.
C1: Hanging hole
C2: Battery compartment
C3: USB charging socket
C4: Power supply socket
C5: Support frame
Outdoor Full Function Sensor
D1: Solar panel
D2: Rain funnel
D3: Wind cups
D4: Bubble level
D5: Temperature | humidity induction box
D6: Wind Directional Vane
D7: Reset button
D8: LED indicator
D9: Manual transmit signal button
010; Battery compartment
D11: Support rod
D12: Fixed base
D13: Socket head cap screws
D14 Drain vents For rain sensor
D15: North direction mark
D16 Rain funnel rotation mark
D17: Large nut for fixing the support rod and the base
D18: Lighting and UV sensors

How to use

Setup Preparation
Items you will need to setup your station (not included):
• Crosshead screwdriver and hex driver for assembly.
• 5V1A power adapter
• Fresh Batteries:
AA2 alkaline or lithium batteries for the weather station.
AA 3 alkaline or lithium batteries for the multi-combination sensor.
For Best Results:
• Remove weather station and sensors from the package and place together on a table or bench, within easy reach.
• Place batteries and screwdriver within reach of setup location.
• Keep sensors and weather station 0.15-0.3 meter or 5-10 feet for at least 15 minutes after instelling batteries, to allow the sensors and station to connect repeatedly.
Quick Setup
Insert 3 AA batteries into the multi-combination wireless remote sensor.
Then plug the power cord into the weather station.
Download the corresponding APP (WeatherSense APP) on the mobile phone, open the APP, register the user and log in, and pair the weather station with the WIFI and server information according to the prompt of the APP.(Skip this step if your model doesn’t have WiFi.)
https://itunes.apple.com/cn/app/weathersense/id1273633929?mt=8| https://play.google.com/store/apps/details?id=com.emax.weahter
---|---
Configure basic settings. Set time, date, unit, etc.
Insert 2 AA batteries into the weather station (when the power adapter is unexpectedly powered off, the settings will not be lost).
Move the remote sensor to outdoor or other location after 5 minutes.
Pairing with weather station device. (Skip this step if your model doesn’t have WiFi.)
Login user account.
Make sure your phone is connected to a 2.4GHz Wi-Fi network.
Plug in weather station with AC/DC power, Press and hold “” button for 3 seconds until “WI-FI AP” blinking on the device display. If the device is first enabled, it will automatically enter AP mode, and “WI-FI AP” blinks on the display.
Please select “W003” for the connection method. After the new device search is completed, please find and select “WeatherTyp’”.
Select the correct Wi-Fi network SSID and Make sure Wi-Fi password you’re inputting is correct.
Follow the in-app instructions to pair the weather station device:
When the notice of Device binding successful appears in the App. The weather station device will automatically exit AP mode. If not please press and hold “” button for 3 seconds to exit it.
Confirm the city of your current location:
Make sure your phone’s location service are tured on and allowed for this App. Make sure that your current location city can be successfully located in the map. Some cities may fail to locate because there is no corresponding success in the app. You can manually move the location or be automatically positioned to a large administrative level city.
The device will connect to your home Wi-Fi network automatically in few minutes. Wi-Fi and signal symbol and All weather data will be displayed after Wi-Fi is successfully connected.
Note: after the power AC/DC adapter is disconnected, the WIFI connection of the device will be automatically disconnected.
Mounting Wireless Sensor
Mount in an open area clear for 15 meters (50 feet) in all directions.
The sensor needs to be mounted on a sturdy platform or bracket that is mounted 1.5 m (5 ft) above the ground.
The base of the sensor is screwed to the platform and the support frame. Tighten the large nut that secures the support rod to the base
When installing, adjust the sensor body so that the solar panel faces south, otherwise the wind direction will be wrong. Note the “N” North Embossed Mark on the top of the sensor (requires acompass for proofreading, and the “N” North Emboss mark is identical to the “N” of the compass).
When installing the sensor, usa the top bubble level to ensure the sensor leval, otherwise the accuracy of the rainfall reading will be affected.
After completing the above two steps, lock the two hexagon socket screws on the side of the sensor body.
When installing, the fixing screws of the wind cup and the wind direction cursor should be tightened and tightened.
The rainforest structure of the sensor needs to be cleaned regularly (recommended cycle 1-3 months, dapending on the frequency of rain):

Remove the rainwater funnel (tum the rain sand funnel according to the direction of rotation shown).
Gently remove debris or insects from the rain sensor.
Remove debris from the rainwater funnel itself especially debris from the funnel drain.
Remove the debris from the drain,
Reinstall the rainwater bucket.
Note: Do not apply oil to the rain sensor.
Note: Make sure the wiraless sensor is installed within 50meters of the weather station (empty, unobstructed).

According to the thickness of the obstacle between the wireless sensor and the weather station, the distance should be shortened as much as possible (the distance after the wireless signal penetrates the obstacle will be shortened), otherwise the data transmission may be disturbed.

| SCHEUFER Technologies GmbH
Address: Hertleinstrasse 37, 91052, Erlangen, Germany
E-mail: Mark.Zhang@scheufer.com
---|---
| VISHTEC UK Co., Ltd
Address: Unit G25 Waterfront Studios, 1DockRoad, London, E16 1AH
E-mail: Vincent.feng@vish-tec.com