VANKYO Leisure 470 User Manual

Leisure 470
User Manual

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

✉  www.alza.co.uk/kontakt
✆  +44 (0)203 514 4411

Importer  Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Please read this manual thoroughly before using this product and keep it for future reference.

Packing list

Leisure 470

|

Remote (Batteries not included)

|

User Manual

---|---|---

AV Cable

|

HD Cable

|

Power Cable

Notice

Recommended – Video, Movie

NOT Recommended – PowerPoint, Excel, Word

Function overview

Quick Start

1. Plug the power cord into an outlet.
2. Take off the lens cover.
3. Connect your device to the projector correctly.
   • Original USB cable (not included)
4. Press the Power Button to turn on the projector.
5. Select the correct input source to project your device.
6. Adjust the kickstand accordingly.
7. Adjust the keystone and focus ring to get the best image performance.
8. Press the Power Button twice to turn off the projector.

Input source

Press on the projector or remote to enter the interface of Input Source.
A. Multimedia Connection

B. HD Connection

C. VGA Connection

D. Screen Mirroring

Projector Connections

Screen Mirroring

IMPORTANT :
Before screen mirroring, please press the button on the projector/remote to enter the interface on Input Source and select Screen Mirroring.

Screen Mirroring through Wireless Connection

For iOS System

• Streaming with cellular data

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface f Screen Mirroring for iOS System.

2. Go to the settings of your iOS mobile device and connect it to the WIFI of LEISURE470XXXXXX (pwd:12345678). Please ignore the exclamation mark before it.
3. Activate Screen Mirroring/AirPlay Mirroring function on your iOS mobile device, then search for the projector.

4. Select LEISERU470-XXXXXX from the searching results to connect.
5. The display of your iOS mobile device will be projected to the wall/screen via cellular data after a successful connection.

• Streaming with your router’s WIFI

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface f Screen Mirroring for iOS System.

2. Go to the settings of your iOS mobile device and connect it to the WIFI of LEISURE470XXXXXX.
3. Visit http://192.168.49.1 from a browser on your mobile device, tap WIFI AP

   Scan, select your router’s WIFI and enter the right password, then tap Connect to continue.

4. Your router’s WIFI will be displayed on the interface of Screen Mirroring for the iOS System after a successful connection.

5. Get back to the WIFI setting of your iOS mobile device, then connect it to the same router’s WIFI.
6. Activate Screen Mirroring on your iOS mobile device, then search for the projector and select LEISURE430W-XXXXXX from the searching results to connect.
7. The live streaming content from your iOS mobile device will be projected to the wall/screen through a WIFI connection.
   TIP: If you would like to connect to another router’s WIFI, please repeat the procedures mentioned in the section of Streaming with your router’s WIFI.

For Android System

To activate this function, your android device must support a Multi- Screen/Wireless display. Names may differ from different devices.

1. Turn on the projector, select Screen Mirroring as the Input Source, then press the OK button on the projector/remote to switch to the interface of Screen Mirroring for Android System.

2. Turn ON the WIFI Switch on your Android device. Successfully connected WIFI on an Android device is not a must unless the live streaming content is needed.

3. Activate the Multi-Screen function on your Android device and search for the projector.

4. Select LEISURE470-XXXXXX from the searching results to connect.

5. Your Android device display will be projected to the wall/screen after a successful connection.

6. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.

7. Make sure your mobile device is close to the projector when using a wireless connection. A distance within 1 meter is recommended.

8. Some mobile devices may not support mirroring due to compatibility.

• Upgrade the Firmware Version of Screen Mirroring

When there is a newer version, you will see Discover new firmware… on the projected screen, please press the OK button on the projector/remote and follow the steps to upgrade the firmware version of screen mirroring as needed.

1. Make sure the projector is connected to WIFI and DO NOT power off during updating.
2. It takes around 6-8 minutes for the update to complete, please wait patiently.
3. The projector will automatically reboot once the upgrade is completed.

TIP:
After entering the interface of Screen Mirroring for the iOS system, you can press and hold the OK button to reset the firmware version of screen mirroring.

Screen Mirroring with the Original USB Cable

For iOS System

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for the iOS System.
2. Connect your iOS mobile device to the ISB port of the projector with the ORIGINAL lightning cable.
3. Select Trust in the pop-up window of Trust This Computer.

4. The display of your iOS mobile device will be projected to the wall/screen after a while.

For Android System

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for Android System.
2. Go to the settings of your mobile device, find Developer options, and turn on USB debugging.

TIP:
The steps to turn on Developer options vary from different models of Android devices. You may check or from the internet or contact us for the detailed steps. We take Samsung Galaxy S8+ as an example.
• Go to settings of your Android device, then tap About phone > Software information > Built number.
• Continuously tap on Built Number several times until it shows Developer mode had been turned on.
• Get back to the settings of your mobile device, it will show Developer options.

3. Connect your Android mobile device to the USB port of the projector with the ORIGINAL USB cable.
4. Tap OK when your Android mobile device pops out the window of Allow USB debugging?, then your Android device will be projected to the wall/screen.

1. The USB cable MUST be the ORIGINAL cable or the cable which can transfer the data, otherwise screen mirroring may fail. You can plug the cable into your laptop to check the availability of transferring the data.

2. Some Android mobile devices may only transfer the display without audio due to protocol restrictions.

3. Some mobile devices may not support screen mirroring due to compatibility.

Projection distance & size

The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed. Ambient darkness will improve the clarity of the projected images.

Specification

(8.7 x 6.6 x 3.3in)

Photo Format Supported| BMP/JPG/PNG/GIF/JPEG
Video Format Supported| AVI/MP4/MKV/FLV/MOV/RMVB/3GP/MPEG/H.264/XVID
Mounting Screw| M4 Metric
Light Source| LED
Input Signal| 576i-720P-1080i-1080P
Aspect Ration| 4:3/16:9/auto
Keystone| ±15°
Power Supply| 100V-240V, 50/60Hz
Unit Net Weight| 1.35kg (2.98lb)
Audio Format Supported| ACC/MP2/MP3/PCM/FLAC/WMA
Ports| HD in 2x/ USB Port x1/ VGA Port x1/ AV In x1/ Audio

Out x1/Memory Card Slot x1

Number of Screws| 3

Troubleshooting guide

1. The content from Hulu, Netflix, and similar services can not be mirrored or cast.
   •Due to the copyright restrictions from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored.
2. What should I do if I want to watch the content from Hulu, Netflix, and similar services via the projector?
   • Please prepare a Fire TV Stick, Roku stick, or Chromecast™ (not included), then connect it to the projector to watch the content.
3. Blurry Image
   • Adjust focus ring (keystone)
   • Projector and screen/wall must be an effective distance.
4. Remote Unresponsive
   • Make sure remote points at IR receiver directly.
   • Do not cover IR receiver.
   • Try a new pair of AAA batteries.
5. Upside Down Images
   • Enter “Menu” on projector or remote to flip the projection image.

Warranty Conditions

A new product was purchased in the Alza.CZ sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person, or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design, or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.CZ a.s.
Registered office: Jankovcova 1522/53,

The subject of the declaration:
Title: Projector
Model / Type: Leisure 470

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. (EU) 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU

Prague, 27.3.2021

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>