Nero 742700 Steam Iron Instructions
- June 6, 2024
- Nero
Table of Contents
Nero 742700 Steam Iron
Please read these instructions before use and view the illustrations before using this appliance.
Code: 742700 Ceramic
Code: 742715 Stainless Steel
Attention:
- Please read the owner’s manual before using this product.
- Do not fill iron with any other liquid except water.
- The iron must not be left unattended while it is connected to the supply mains.
- The plug must be removed from the socket outlet before the water reservoir is filled with water.
- When setting the iron on support, be sure the support is stable.
- Do not use the iron if it’s broken or damaged after dropping. The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction.
Cautions:
- Make sure that the applied voltage is the same as the rating voltage.
- If the supply cord is damaged, it must be replaced by the manufacturer, service agent or qualified persons in order to avoid a hazard.
- This iron is for household use only.
- Do not immerse the iron into any liquid for cleaning.
- Do not touch the hot metal plate, hot water, or steam to avoid scalding.
Main technical parameters:
Type | Rated voltage | Rated frequency | Rated power |
---|---|---|---|
R-338 | 220-240V | 50/60Hz | 2000-2400W |
Characteristics and structure:
A: Soleplate
B: Skirt
C: Handle
D: Spray nozzle
E: Water tank
F: Fill cover
G: Steam knob
H: Spray & burst of steam button
I: Top handle
J: Cord guard
K: Clean button
L: Temperature dial M: Pilot light
N: Rear cover
O: Water tank cover
Filling water:
1. Before filling with water, please pull out the plug first.
2. Set the steam control to the minimum position.
3. Pull down the cover of water filling mouth, and then fill with water.
Spraying:
Press the spray button, and water will spray out from the spray nozzle. Always
keep enough water in the water tank.
Steam ironing:
1. To use steam ironing, turn the steam control to minimum position and set
the temperature control at the ‘…’ or MAX position.
2. When the indicator light goes out, turn the steam control to the suitable
position.
Burst of steam:
Set the temperature control at the ‘…’ or MAX position, then press down the
burst of steam button.
Dry ironing:
Turn the steam control to minimum position, then set the temperature control
to the suitable position.
Self-cleaning:
Fill with water, then plug the iron into the mains. Set the temperature
control to the maximum position. About 3 minutes later, press the self clean
button for about 1 minute. Steam and hot water will be sprayed to clean the
steam chamber. For best results use this function once every two weeks.
Anti-drip:
This iron is equipped with a drip stop function: the iron automatically stops
steaming when the temperature is too low to prevent water from dripping out of
the soleplate.
Anti-calc:
The anti-calc function filtrates the minerals from the water to prevent
mineral residue build up in the steam chamber.
Automatic shut off:
If the iron is switched on and not moved for a period of 8 minutes while
standing on its heel, or 30 seconds while standing on the soleplate, an
internal safety feature will switch the iron off and the auto shutoff
indicator will blink. Move the appliance sharply to switch it on again.
Storage:
After using, pull out the plug and pour out the remaining water. Turn the
steam control to and the temperature control to ‘min’. Let the iron cool down,
then store the iron vertically in a safe and dry place.
1 Year Warranty
Imported By R. Weatherdon & Co Pty Ltd Sydney – Australia
www.weatherdon.com.au
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>