HOLMAN WS5029 iWeather Digital Weather Station Instruction Manual
- June 6, 2024
- Holman
Table of Contents
WS5029 iWeather Digital Weather Station
Weather Forecaster
WS5019 INSTRUCTION MANUAL
Table of Contents
Technical Data…………………….p1-p3 Glossary……………………………..p4-p5 Initial
Operation……………………….p6
Programming Manual Time Setup………………p7-p8 Daily Alarm Setup…………………….p9 Snooze /
12-24Hr / ºC-ºF…………..p10 Max/Min Indoor/Outdoor Temp..p11
Weather Forecast…………………………..p12 Moon Phase Display………………………p13 Living Space Humidity & Battery……p14 Wireless Connection & Tips…………..p15 Country / City Code Table………..p16-p21 Warranty / QR Code…………….Back Page
Technical Data
WS5019 HOLMAN iWeather Weather Forecaster
Thank you for purchasing this device, please read the operating instructions
carefully to familarize yourself with the features and modes of operation
before using the Weather Station.
Technical Data – Cont.
Technical Details: Indoor Unit · Six keys: MODE, +, – ,
HISTORY,CHANNEL,SNOOZE/LIGHT. · Time display in 12/24 format · Continuous
perpetual calendar up to 2099 · Display of Date, Month and Day of week · Day
of week display available in 7 languages, i.e. German, English, Italian,
French, Dutch Spanish,Danish. · Weeks Display
‘XDODODUPZLWKVQRR]HIXQFWLRQDODUPZLOODFWLYDWHHYHU¿YHPLQXWHV · 5 weather
forecasts: sunny, partly sunny, cloudy, rainy, stormy, weather
symbol can be selected manually. · Barometer and bar and data for 12 hours
history of air pressure. · Altitude-setting for calculation of air pressure.
2
Technical Data – Cont.
· Indoor/outdoor temperature and humidity
· Thermometer measuring range inside: 0°C to +50 °C , outside -20°C~60 °C
· Temperature display elective in °C or °F
· Temperature alert
· Sun Rise Sun Set/moon rise moon set for 176 cities
· Moon phase
· Low battery indication)
· Blue background illumination LED.
· Battery: 2 x AA, LR06, 1.5V
Outdoor sensor:
· Frequency: 433 MHz · Battery: 2 x AAA, LR03, 1.5V · 3 channels · Transmitting distance: 50M open area. · Sit at least 1 metre of the ground.
3
Glossary
1. 12 hour history of pressure 2. Air pressure data 3. Freeze 4. Weather 5.
Bar of air pressure 6. Air pressure trend 7. Indoor low battery 8. Outdoor low
battery 9. Channel 10. RF symbol 11. Temperature alert 12. Outdoor temperature
trend 13. Indoor temperature trend 14. Outdoor humidity trend 15. Living face
4
16. Indoor humidity trend 17. Week 18. Day of Week 19. Alarm 20. Month 21.
Time 22. Summer time symbol (not applicable in Australia market) 23. Date 24.
Moon set 25. Moon Rise 26. Moon Phase 27. Cities 28. Sun set 29. Sun rise
A= MODE B=+ C= – D= HISTORY E=CHANNEL F=SNOOZE/LIGHT G=RESET
5
al Operation – Outdoor Sensor & Indoor Sensor
Outdoor Sensor 3OHDVHLQVWDOOEDWWHULHVLQWKH2XWGRRU6HQVRU¿UVW
· Open the battery compartment located on the rear side of the device. Place
the batteries in the battery compartment. Observe the shown polarity.
· Please place in a sheltered position outside where it will not get wet or
weathered. Indoor Unit
· Open the battery compartment located on the rear side of the device. Place
the batteries in the battery compartment. Observe the shown polarity.
7KHDWOLWXGHLVÀDVKLQJSOHDVHXVHCCRUCCWRVHWWKHDWOLWXGHRIRXUSRVLWLRQWKHQ
SUHVV+LVWRU:HDWKHUVPEROZLOOEHÀDVKLQJSOHDVHXVHRU±WRFKRRVHZHDWKHUSLFWXUH
· The station is now connecting to the outdoor sensor. This process takes
about 3 minutes. Then the display will show the outdoor temperature and
humidity, in case of failure of reception, please press”CHANNEL”for more than
3 seconds to receive again.
6
Programming – Manual Time S
Manual time set-up (most important to quit the reception of radio controlled
signal by holding the PLQXVEXWWRQIRUVHFRQGVLQFDVHLWVWDUWVWRÀDVKEHIRUHVHWXS
· Press and hold “MODE” for 3 seconds.
7KHGLVSODIRUWKHHDULVÀDVKLQJ8VH³³DQG³³WRVHOHFWWKHHDU3UHVV³02′(³WRFRQ¿UP
7KHGLVSODIRUWKHPRQWKLVÀDVKLQJ8VH³³DQG³³WRVHOHFWWKHPRQWK3UHVV³02′(³WRFRQ¿UP
7KHGLVSODIRUWKHGDWHLVÀDVKLQJ8VH³³DQG³³WRVHOHFWWKHGDWH3UHVV³02′(³WRFRQ¿UP
7KHGLVSODIRUWKHWLPH]RQHLVÀDVKLQJ8VH³³RU³³WRVHOHFWWKHWLPH]RQH
3UHVV³02′(³WRFRQ¿UP
7KHODQJXDJHVHOHFWLRQIRUWKHGLVSODRIWKHZHHNGDVLVÀDVKLQJ8VH³³RU³³WRVHOHFWWKH
language. 3UHVV³02′(³WRFRQ¿UP
7
Programming – Manual Time Setup – Cont.
7KHKRXULVÀDVKLQJ8VH³³RU³³WRVHOHFW3UHVV³02′(³WRFRQ¿UP
7KHGLVSODIRUWKHKRXULVÀDVKLQJ8VH³³RU³³WRVHOHFWWKHKRXUPress “MODE” WRFRQ¿UP ·
7KHGLVSODIRUWKHPLQXWHVLVÀDVKLQJ8VH³³RU³³WRVHOHFWWKHPLQXWHV Press
³02′(³WRFRQ¿UP
7KHFRXQWUFLWLVÀDVKLQJ8VH³³RU³³WRVHOHFWWKHFLWRIVXQULVHVXQVHWPRRQULVH
moonset. 3UHVV³02′(³WRFRQ¿UP
Information: · The clock automatically changes from set-up mode to time
display mode if no keys are
pressed for 20 seconds.
8
Programming – Daily Alarm Setup
· Press “MODE” to switch from time display to A1 display.
3UHVVDQGKROGWKHNH³02′(´IRUVHFRQGVWKHÀDVKLQJDODUPWLPHLVVKRZQ
7KHKRXUGLVSODRIWKHDODUPWLPHZLOOÀDVK8VH³³RU³³WRVHOHFWKRXU
3UHVV³02′(³WRFRQ¿UP 7KHQIROORZZLWKWKHPLQXWHV8VH³³RU³³WRVHOHFWWKHPLQXWHV
3UHVV³02′(³WRFRQ¿UP · Then press “MODE” to switch from A1 display to A2
display.
(The setting is the same as for A1) · A1 is for Monday to Friday and A2 is for
Saturday and Sunday.
Daily alarm on/off · When showing A1 alarm time, press “+” to activate the alarm 1 with alarm symbol showing · Press “+” again to cancel the alarm. · When showing A2 alarm time, press “+” to activate the alarm 2 with alarm symbol showing · Press “+” again cancel the alarm .
Information:
· The clock automatically changes from set-up mode to time mode if no keys are pressed
for 20 seconds.
· Press any key to turn off alarm when beeping. (The alarm sounds for 2 minutes if no key is
9
pressed to stop it)
Programming – Snooze / 12-24Hr / ºC-ºF
Snooze function – To activate the snooze function, follow the steps below ·
Press the key “SNOOZE/LIGHT”, while the alarm sounds, to activate
the snooze function. ,IWKHVQRR]HIXQFWLRQLVDFWLYDWHGVQRR]HVPEROLVÀDVKLQJ · The
alarm will repeat after 5 minutes. · The snooze function can be stopped by
pressing any key. 12/24 hours mode The time display can be in 12 hour (AM/PM)
or 24 hour mode. °C/°F temperature display The temperature display can be in
°C or °F. Press the key “-” to switch between the mode.
10
Programming – Max/Min Indoor/Outdoor Temp
Press + for displaying of indoor/outdoor max/min. of temperature and humidity
Temperature alert set up. · Press “CHANNEL” to select the channel
(ch1,ch2,ch3) if more than one outdoor sensorare within reach. ·
3UHVVDQGKROGWKHNHLQWKHDUHDRIRXWGRRUVHOHFW212))ZKHQÀDVKLQJ · Press
“MODE”WKHXSSHUOLPLWWHPSHUDWXUHLVÀDVKLQJXVHRU±WRVHWWKHPD[LPXPDOHUWWHPSHUDWXUH ·
Press
“MODE”WKHORZHUOLPLWWHPSHUDWXUHLVÀDVKLQJXVHRU±WRVHWWKHPLQLPXPDOHUWWHPSHUDWXUH ·
When the alert is activated, the alert symbol will be shown.
Temperature alert on/off Press and hold the “” key to set the temperature
alert on or off. · Alert on: Temperature alert symbol shown in display. ·
Alert off: Temperature alert symbol goes out.
11
Weather Forecasts
5 Weather Forecasts Sunny Slightly sunny
Cloudy
Rainy
Stormy
Note: As the weather is forecasted by temperature, humidity only, the display will have a discrepancy with the actual weather occasionally.
Illumination Press the key “SNOOZE/LIGHT” to activate the display illumination for 5 seconds.
12
Moon Phase Display
The weather station uses saved data to show the moon phase.
Please refer to the chart for information on Moon Phase positions.
13
Living Space Humidity & Battery
The weather station uses saved data to determine the humidity in the living space and shows the respective symbols:
Dry Comfortable Humid
Dry
below 40%
Comfortable 40% – 70% (Temperature Display: 20 – 28°C)
Humid
70% – 90%
Low Battery Condition Display
The weather station displays the low battery condition symbol to warn you that
the weather station or the outdoor sensor need to have the batteries
exchanged. It is a good idea to exchange both when the symbol appears.
14
Wireless Connection & Tips
Wireless connection to the Outdoor Sensor · Press the key “CHANNEL” to select
a channel. You can read the data of up to
3 sensors at one weather station. · Press and hold the key “CHANNEL” for 3
seconds to search for outdoor sensors.
Tips When placing both the inside and outside units remember they are subject
to interference. Try to: · Install both the units as close as possible to each
other. · Try and avoid outside interference by not placing them near
computers, TV’s or TV
antenna’s etc. ·
$OVRUHPHPEHUFRQFUHWHZDOOVDQGÀRRUVFDQLQWHUXSWWUDQVPLVVLRQV7UDQGDYRLGDVPXFK
as possible. · If the connection is successful initially and then fails
occassionally, try to reduce the
distance. · If the connection fails and then is regained, as sometimes when it
reconnects the
information is not correct, it is a good idea to take batteries out and do a
manual rese1t .5
Country / City Code Table
16
Country / City Code Table
17
Country / City Code Table
18
Country / City Code Table
19
Country / City Code Table
20
Country / City Code Table
21
Warranty
Warranty: We will honour all statutory guarantees that this product is of
acceptable quality.
LQFOXGLQJWKDWLWLV¿WIRUSXUSRVH
HOLMAN Industries: 47 Walters Drive, Osborne Park, WA 6017. Ph: +61 8 9204 1011 www.holmanindustries.com.au
Scan the QR Code above to see more information on this product and the full iWeather product range.