HOLMAN CLXRGB60 RGB Colour with Inbuilt Transformer User Guide
- June 6, 2024
- Holman
Table of Contents
HOLMAN CLXRGB60 RGB Colour with Inbuilt Transformer User Guide
Mounting the Controller
Our Plug + Socket system means expansion is easy with no electrician
required. Install the controller near a 240V AC power point ideally located in
a house, garage, or exterior electrical cubicle.
For ease of use, eye level placement is recommended. Ideally, your controller
location should not be exposed to rain or areas prone to flooding or heavy
water. This controller comes with an internal transformer installed in a
weatherproof enclosure. The housing is designed for indoor or outdoor
installation but the power cable needs to be plugged into an outdoor power
point under cover.
Drill a hole suitable for a wall plug and a insert a screw with a minimum 7mm
wide screw-head. Hang the controller over the screw head using the key hole
slot positioned externally on the top center of the back of the controller.
If your controller requires extra support you can drill an additional hole and
fasten it through the spare holes positioned internally under the terminal
cover.
Connecting the Cables
Ensure you have the compatible cables for your controller.
CLXRGB60 (4-Pin Plug + Socket)
Connect the power cable to an outdoor power point. Ensure the socket is
weatherproof if you have mounted your controller outdoors. Ensure the Plug +
Socket cable ends are connected and the caps are hand tightened only. An end
cap is provided on each cable to weatherproof the last connector.
Setup Example (Connect up to 60W of Lights)
-
Only use lights within one color system, either RGB Color 4-Pin Plug + Socket or Warm White 2-Pin Plug + Socket
-
These controllers have a capacity of 60W. Power is consumed by both the lights and the cable.
It is best to connect no more than 55W of lights, and no more than 75m of cable to a controller. -
These controllers have an automatic power overload switch that will turn the lights off if too much power is being consumed.
Downloading Holman Home
Wi-Fi Control with Home
-
2.4GHz Wi-Fi CONNECTION
via your smartphone with Holman Home™ -
Voice command enabled
with Amazon Alexa and Google Assistant
Wi-Fi compatible controllers are designed to be operated via Holman Home
Lighting Scenes
-
Spotlights:
Great for illuminating individual plants or trees and turning them into a garden feature.
-
Path Lights:
Create a statement entrance to your home by lighting pathways around your front door.
-
Deck Lights:
Light up the perimeter of your deck to enhance your outdoor entertaining area.
Troubleshooting
Lights are not turning on: Ensure the controller is connected to a
power point and turned on. Check all Plug + Socket cables are properly
connected. Check that you have not connected too many lights to one
controller—do not exceed 60W.
Lights are too dim or not turning on: Connecting excessive lengths of
cable will result in wattage loss. Try to use the least amount of cable length
as possible.
For more help, visit https://www.holmanindustries.com.au/product/rgb-colour- wifi-garden-light-controller
Warranty
3 Year Replacement Guarantee
Holman offers a 3 year replacement guarantee with this product. in Australia
our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
As well as your statutory rights referred to above and any other rights and
remedies you have under any other laws relating to your Holman product, we
also provide you with a Holman guarantee. Holman guarantees this product
against defects caused by faulty workmanship and materials for 3 years
domestic use from the date of purchase.
During this guarantee period Holman will replace any defective product.
Packaging and instructions may not be replaced unless faulty.
In the event of a product being replaced during the guarantee period, the
guarantee on the replacement product will expire 3 years from the purchase
date of the original product, not 3 years from the date of replacement.
To the extent permitted by law, this Holman Replacement Guarantee excludes
liability for consequential loss or any other loss or damage caused to
property of persons arising from any cause whatsoever. It also excludes
defects caused by the product not being used in accordance with instructions,
accidental damage, misuse, or being tampered with by unauthorised persons,
excludes normal wear and tear and does not cover the cost of claiming under
the warranty or transporting the goods to and from the place of purchase.
Should you suspect your product may be defective and need some clarification
or advice please contact us directly:
1300 716 188
support@holmanindustries.com.au
11 Walters Drive, Osborne Park 6017 WA
If you are certain your product is defective and is covered by the terms of
this warranty, you will need to present your defective product and your
purchase receipt as proof of purchase to the place you purchased it from,
where the retailer will replace the product for you on our behalf.
Thanks for being a
#SMARTGARDENER
We really appreciate having you as a customer, and would like to say thank you
for choosing us.
We recommend registering your new product on our website. This will ensure we
have a copy of your purchase and activate an extended warranty. Keep up to
date to with relevant product information and special offers available through
our newsletter.
www.holmanindustries.com.au/product-
registration/
Thanks again for choosing Holman
For the #SMARTGARDNER
Copyright © 2021 Holman Industries
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>