Electrolux FA31-202GY Air Purifier Air Flow 3 Instructions
- June 6, 2024
- Electrolux
Table of Contents
Electrolux FA31-202GY Air Purifier Air Flow 3 Instructions
DESCRIPTION OF YOUR AIR PURIFIER FLOW A3
Appliance:
-
A. Air outlet
-
B. UI panel
-
C. Main body
-
D. Base
-
E. Sensor window & Adapter jack
Control panel: -
F. Fan speed indicator
-
G. Power on/off
-
H. Fan speed control
-
I. Air quality indicator
-
J. Filter change indicator
-
K. Toggle mode & Filter reset
-
L. Auto mode indicator
-
M. Sleep mode indicator
SAFETY INFORMATION
your model. Use the unit only as instructed in this USER MANUAL. These
instructions are not meant to cover every possible condition and situation
that may occur. Common sense and caution must be practiced when installing,
operating, and maintaining any appliance.
WARNING! extension cord or an adaptor plug. Do not remove any prong from
the power cord. This appliance can be used in 50Hz or 60Hz power supply
without any change.
Do not under any circumstances, cut, remove or bypass the grounding prong. in
the vicinity of this or any other appliance. Read product labels for
Children and Vulnerable People Safety
WARNING! Risk of suffocating, injury or permanent disability.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
Children under 3 years of age should be kept away from the appliance unless
continuously supervised.
Keep all packaging away from children.
If the appliance has a child safety device, we recommend you activate it.
Electrical Information
WARNING! Avoid fire hazard or electric shock.
If you are not sure the outlet is adequately grounded or protected by a time
delay fuse or circuit breaker, have a qualified electrician install the proper
outlet according to the National Electrical Code and applicable local codes
and ordinances.
Do not use an extension cord or an adapter plug.
Never unplug the unit by pulling on the power cord. Always grip the plug
firmly and pull straight out from the receptacle.
Do not pinch, bend, or knot the power cord.
Do not cut or damage the power cord. If the power cord is damaged, it should
only be replaced by an authorized Electrolux servicer. This unit contains no
user- serviceable parts. Always call an authorized Electrolux servicer for
repairs.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Be sure to unplug the unit before cleaning to prevent shock or fire hazards.
Safety Precautions
CAUTION! Avoid Serious Injury or Death.
Do not insert or place fingers or objects into the air discharge area or front
grille of the unit.
Do not start or stop the unit by unplugging the power cord or turning off the
power at the electrical box.
In the event of a malfunction (sparks, burning smell, etc.), immediately stop
the operation, disconnect the power cord, and call an authorized Electrolux
servicer.
Do not operate the unit with wet hands.
Do not pull on the power cord.
CAUTION! Avoid Injury or damage to the unit or other property.
Do not direct airflow at fireplaces or other heat related sources as this
could cause flare ups.
Do not climb on or place objects on the unit.
Do not hang objects off the unit.
Do not place containers with liquids on the unit.
Turn off the unit at the power source when it will not be used for an extended
period of time.
Operate the unit with air filter in place.
Do not block or cover the intake grille, discharge area and outlet ports.
Ensure that any electrical/electronic equipment is 30 cm away from the unit.
DISPOSAL
This symbol on the product indicates that this product contains a battery
which shall not be disposed with normal household waste..
This symbol on the product or on its packaging indicates that the product may
not be treated as household waste.
To recycle your product, please take it to an official collection point or to an Electrolux service centre that can remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s rules for the separate collection of electrical products and rechargeable batteries.
Thank you for choosing the Electrolux air purifier FLOW A3. Always use original accessories and spare parts to get the best results. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.
BEFORE STARTING
- Read this manual carefully.
- Check that all parts described are included.
- Pay special attention to the safety precautions!
SET UP
The filters have to be installed before use. Caution: Switch off the device before installing filters.
-
Open the base of the filter
Open the product by rotating the base in anticlockwise direction with the handle provided at the bottom till it comes loose (ref. picture 1). -
Take out the filter and remove the filter bag
Carefully remove the filter including plastic packaging from the unit and break open the plastic bag and discard appropriately (ref. picture 2). -
Install the filter
Carefully insert the filter back into the product without the plastic packaging (either end of the filter works). Take care that the filter is placed in the centre of the cavity (ref. picture 3). -
Close the base
Close the product by rotating the base in clockwise direction with the handle provided at the bottom till it is securely in place. (ref. picture 4).
OPERATION
Caution: Please ensure the filters are correctly inserted in the filter compartment, the equipment is installed on a level surface and the power plug is firmly connected.
-
5 Connect the power plug.
-
6 Power on
Power on the product by gently touching the ON/ OFF icon on the center of the product (ref. picture 6). -
7 Fan speed control Change the fan speed by gently touching fan icon on the product. If the product is in AUTO mode, it will switch to manual mode on touching the fan icon. (ref. picture 7).
-
8 Auto mode and sleep mode Change between AUTO and SLEEP mode by gently touch icon labelled “∧∨ “.
In AUTO mode the unit will adjust operation according to latest air quality (PM2.5 level). In SLEEP mode unit will operate at the low noise level and all indicators except for SLEEP icon will go off. -
9 Power off Power down the product by gently touching the ON/OFF icon on the centre of the product (ref. picture 9)
AIR QUALITY INDICATOR
- 10 The appliance has an air quality sensor that analyses the air quality. The air quality light will show the real-time air quality through different colours of light. As shown below:
FILTER CHANGE INDICATOR
-
11 The filter change indicator will light up to remind you to change the filter (Ref. # EFFBRZ2).
• When filter change indicator flicker with red light, please replace the filter and reset the filter change indicator.
• When filter change indicator stop flicker and the red light fix, please replace the filter immediately and reset the filter change indicator. -
12 Filter change indicator reset operation
Press the mode icon labelled “∧∨ ” for 3s and filter change indicator will reset, then red light will go off.
CARE AND CLEANING
- 13 Unplug the appliance before cleaning to prevent shock or fire hazards. Use a damp cloth or a vacuum cleaner with soft brush to clean your air purifier.
- 14 The plastic part of the cabinet and top may be cleaned with an oil-free cloth or washed with a cloth dampened in a solution of warm water and mild liquid dishwashing detergent. Be sure to wring excess water from the cloth before wiping around the controls. Excess water in or around the controls may cause damage to the appliance.
- 15 Never use harsh cleaners, wax or polish when cleaning the unit.
STORAGE
- 16 If you are not planning to use the appliance for a long time, cover it with plastic or return it to its carton.
NOTE: The multi-layer filter can not be washed, it can only be replaced.
CAUTION! Do not touch the fan blade when removing the multi-layer filter.
ERROR CODE
- 17 Fan failure error code, when fan failure occurs, the light of screen will all go off and the unit can’t be operated then.
- 18 Air quality sensor failure error code, when sensor failure occurs, the light of air quality indicator will go off and the unit can’t be set on auto mode.
TROUBLESHOOTING
When fault indicators show that the system is not operating properly,
perform the following check.
Commonly Asked Questions & Topics Carry out the operations below for
commonly-occurring questions or faults.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>