ELInZ BTF95-BLK TWS Bluetooth 5.0 Earphones Wireless Headset Earbuds User Manual

ELInZ BTF95-BLK TWS Bluetooth 5.0 Earphones Wireless Headset Earbuds

Operation Description:

1. Take the earbuds out of the charging case. Earbuds will automatically turn on and pair with each other. After the red and blue LED of two earbuds flash 2 – 3 seconds, earbuds will prompt pairing successfully, right side earbud will prompt “right channel” and left side will prompt “left channel”, that means two earbuds have paired successfully.

2. Turn on the Bluetooth on your device and search for “F9”, click Bluetooth name “F9”, the earbud will contact with devices successfully at the same time right side earbud will prompt “connected”

3. All-in-one multi-function touch control

   • Switching songs: Tap twice the right-side earbud – next song. Tap twice the left side earbud – previous song
   • Tapping right side thrice will increase the volume and tapping left side thrice will decrease the volume
   • Calling: Tap once the right earbud to answer/hang-up calls
   • Tap and hold the right earbud for 3 seconds to reject a call
   • Wake up Siri: Tap and hold the left or right side for 2 seconds until you hear the prompt “wake up Siri”
     

4. 4Turn off and stop use: Put earphone back to charging case, earphone will be disconnected automatically or tap and hold for 3 – 5 seconds, earphone LED will turn red and then it will shut down.

5. Connection remark: If a mobile device has been connected to F9 before, it will remember this device and automatically connect to it. If more than two mobile devices are connected, it will not auto connect

Pairing Troubleshooting:

Using as mono earphones
Press and hold the multifunction keys for 5s or wait 15s until the red and blue LED lights flashes alternatively:
Enable the Bluetooth function in your device and make sure it is in searching mode. Find and click “F9”

Notice (L) side earphone cannot connect to (R) side earphone and mobile device at the same time; If facing an issue with pairing, turn off both earbuds. Then tap and hold buttons at the same time for 10 seconds. When you see blue color LED on, red and blue LED flash, red LED on, LED turn off, then two earbuds re- paired successfully. Find the “F9” on devices, delete it and search “F9” click and then connected successfully.

FAQ

1. Cannot turn on/off earphone automatically
   A: Because of the low battery power, please charge both earbuds

2. No volume after pairing
   A: Because of incorrect pairing, please re-pair the earphones

3. Calling function is working but red LED is always on
   A: Because of low battery power, please charge earphones

4. Earphone as echo
   A: Because if volume too high or noise interference, please adjust volume or transfer to a quieter environment

5. Has noise during phone calls
   A: Because of noisy environment or earphone is very far from the device, please move to a quitter environment or move closer to the device

6. Sound too low
   A: Because earphone not worn properly. Please adjust earphone until sound is clear or audible

www.elinz.com.au / sales@elinz.com.au / 1300 881 773

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>