MIBOXER FUT037S RGB LED Controller Instruction Manual
- June 6, 2024
- MiBOXER
Table of Contents
Subordinate New Brand
RGB LED Controller (Model No.: FUT037S)
RGBW LED Controller (Model No.: FUT038S)
Features
The controller adopts the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting, and strong anti- interference, etc. The controller has an auto-transmitting and auto- synchronizing function. Widely used on the controlling of hotel lighting and home lighting.
RGB LED Controller
Model No.: FUT037S
Working Voltage: DC12V~24V
Output: 6A/Channel
Total Output: Max 12A
Output Connection: Common anode
RF: 2.4GHz
Max Controlling Distance: 30m
Working Temperature: -10~40°C
| 16 Million colors to choose
---|---
| Mix Red, Green, and Blue light to adjust color temperature
| Dim brightness/saturation
| 2.4G RF wireless transmission technology
| Remote control
Control distance 30m
| Smartphone APP control
(2.4GHz gateway is needed)
| Support third party voice control
(2.4GHz gateway is needed)
RGBW LED Controller
Model No.: FUT038S
Working Voltage: DC12V~24V
Output: 6A/Channel
Total Output: Max 12A
Output Connection: Common anode
RF: 2.4GHz
Max Controlling Distance: 30m
Working Temperature: -10~40°C
| 16 Million colors to choose
---|---
| Dim brightness /saturation
| 2.4G RF wireless transmission technology
| Remote control
Control distance 30m
| Smartphone APP control
(2.4GHz gateway is needed)
| Support third party voice control
(2.4GHz gateway is needed)
Dynamic mode table 1 (default)
| Number | Dynamic Mode | Brightness / Saturation / Speed |
|---|---|---|
| 1 | Mardi Gras | Adjustable |
| 2 | Automatic color change | |
| 3 | Sam | |
| 4 | Gemstone | |
| 5 | Twilight | |
| 6 | American | |
| 7 | Fat Tuesday | |
| 8 | Party | |
| 9 | Slow Color Splash |
Dynamic mode table 2 (need to switch manually)
| Number | Dynamic Mode | Brightness / Saturation / Speed |
|---|---|---|
| 1 | Colors gradual change | Adjustable |
| 2 | White light Gradual change | |
| 3 | RGB gradual change | |
| 4 | Seven colors jump to change | |
| 5 | Jump to change randomly | |
| 6 | Red light gradual change +Flash 3 times | |
| 7 | Greenlight gradual change |
+Flash 3 times
8| Blue light gradual change
+Flash 3 times
9| White light gradual change
+Flash 3 times
Signal transmitting
One strip controller can transmit the signals from the remote control to another controller within 30m, as long as there is a strip controller within 30m, the remote control distance can be limitless.
Modes synchronization
Different controllers can work synchronously when they are started at
different times, controlled by the same remote, under the same dynamic mode,
and within 30m distance.
The same dynamic mode, the same speed can be synchronized.
Link/Unlink
Compatible with these remote controls (Purchase separately)
Light will work after linking with remote control; for more details, pls read the remote instruction.
PWM high frequency / low-frequency switching
Switch to high frequency (8KHz): on the condition of turning on the light
- Short press the “OFF” button of the remote control once;
- Short press the “ON” button 5 times within 3 seconds, the white light blinks 2 times quickly, indicating successfully.
Switch to low frequency (500Hz): on the condition of turning off the light
- Short press the “ON” button of the remote control once;
- Short press the “OFF” button 5 times within 3 seconds, the white light blinks 2 times slowly, indicating successfully.
Dynamic mode table selection
Select dynamic mode table 1: The controller is powered off for 10 seconds
and then powered on. Within 3 seconds, press the ” S+ ” button 5 times, the
blue light blink 3 times slowly, indicating successfully.
Select dynamic mode table 2: The controller is powered off for 10 seconds
and then powered on. Within 3 seconds, press the ” S- ” key 5 times, and the
yellow light blink 3 times slowly, indicating successfully.
Attention
- Please check whether the voltage of the power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise, the controller will be broken.
- Please don’t connect wires with power on. Please turn on again only when it is in the right connection and no short circuit.
- Please do not use the controller in a place with a widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.
Controller can not use in a humid area
Made in China
Documents / Resources
|
MIBOXER FUT037S RGB LED
Controller
[pdf] Instruction Manual
FUT037S, RGB LED Controller, FUT038S, RGBW LED Controller
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>