KOLEGEND 9204E 1 or 10 Scale RC Power 4WD Off Road Car 2.4GHz Radio System User Manual

KOLEGEND 9204E 1 or 10 Scale RC Power 4WD Off-Road Car 2.4GHz Radio

System

Thank you for purchasing the remote-controlled car with the radio of 1:10 re car 1:10 re car is a new 4WD High-speed off-road car, that brings more adventure and fun. Featuring a four-wheel independent suspension and Oil shock design, as well as a 4WD traditional system, each detail is developed delicately in order to bear harsh environments when operating. This car even is enjoyed with splash-proof and can be driven in various wet environments! This manual contains the operational approach you need and the course of maintaining the model. So your car can have a long service life. This model is the one with the best performance in the modern model market at present and it is designed by a professional model team obtaining the highest level of support from manufacturers!

This manual contains the necessary setting and operational methods. Our engineers have improved the performance and potential of this remote- controlled car when designing it, in order to make you enjoy freely the pleasure with the highest control. Even you are an experienced model-lover, you also need to read carefully and obey the procedures of this manual before proceeding. Thank you for selecting 1:10 re car. We hope you can enjoy your new remote-controlled car!

BEFORE YOU PROCEED

Please read carefully and follow all introductions and any documents attached for preventing your model from damaging seriously. Violation of these instructions shall be deemed as misuse or faulty operation. Before operating your remote-controlled car, please read all contents of this manual and check carefully the remote car. Please stop your next operation if you decide that it is not what you want for some reason. Dealer shall not support return & exchange after the remote-controlled car is unpacked or used.

RETAIL ACCESSORY VIEW

SAFETY PRECAUTIONS

PAY ATTENTION TO SAFETY PRECAUTIONS

We hope that you can enjoy your new remote-controlled car safely, keeping your head up deliberately! Hopefully, you are safe and pleasant when operating your remote-controlled car! Property damage and serious personal injury may be caused without a safe and responsible attitude. The prevention measures listed in this manual should be followed strictly so as to ensure safe operation. Therefore, you must follow instructions to operate and precautions measures.

You should obey all descriptions and notes listed in this manual so as to ensure the safe operation of your remote-controlled car. This remote- controlled car is not suitable for operating by children below 14 years old and they can operate it only when is under the supervision of a responsible adult who is experienced in the remote.

IMPORTANT HINTS

• The remote car is not suitable for driving on public roads, congested areas, and areas where is easy to cause conflicts with pedestrians, and traffic vehicles.
• In any circumstances, please don’t operate your remote-controlled car in crowded. It may bump into anyone due to its speed for fear of damage.
• Because your remote-controlled car is controlled by wireless, it may have interference with it coming from different sources.
• Please keep the remote-controlled car in a safe area as soon as possible for fear of collision for that it will be out of control instantly caused by radio.
• Be careful not to touch the motor until it cools because the motor and battery will get hot during using process and the motor will have a very temperature in using process. Make sure that there are enough airflow can cool the motor down. Be careful not to be scalded.
• Don’t operate your remote-controlled car in the night or in places blocking your view at any time, because it will be obstructed or damaged.
• Above all, please keep your good judgment at any time.
• When you don’t use it, please always keep disconnection between the battery and electric control joint.
• The matched connecting line when delivery must be used. Don’t change the connecting line of the motor. Improper line connection will cause fire or damage the electronic speed controller.
• Not all batteries can be used in humid environments.
• Please consult your battery manufacturer to ask whether their batteries can be used in humid environments.
• Don’t operate your remote-controlled car in stormy or other severe weather, or thunder and lightning will cause danger.
• Be careful. If you are intend to operate your remote-controlled car by the seaside or on nearby beaches, please don’t allow your remote-controlled car to access salty water (sea water), bitter salt water (in freshwater or seawater), or other polluted water, for the salty water is highly conductive and corrosive.
• The service life of your remote-controlled car can be reduced even it is access to clean water. In humid conditions, you should pay attention to or change your driving mode so as to prolong the service life of the motor.

INSTRUCTIONS

BATTERY AND BATTERY CHARGING
Your model must use a safe and chargeable battery with long service life. Please be sure to read and follow or instructions or notes of the offered battery pack or battery charger. You should be responsible for your charging and normal battery packs.

• It is not allowed to charge the battery when left unattended.
• When charging the battery, please take it out of and charge the battery pack.
• when it is not used or used for transporting a model car, please keep disconnection between the electronic speed controller and battery socket.
• Before charging, be sure to charge it in a cool condition after driving.

Please don’t use damaged electric wires or batteries, connectors with wire exposure or damaged.

When charging or using the battery, children should be supervised by responsible adults.

RECYCLE YOUR LITHIUM BATTERIES
When your battery has already reached the end of its service life, we strongly suggest that you can recycle the batteries of your remote-controlled car and please don’t throw batteries into dustbins.

OFFERED CONFIGURATIONS
Your remote-controlled car has already been equipped with several projects to help your convenient and quick initiation and operation. However, if you need to buy other commodities or parts, you can contact your dealer to operate and maintain your model. This model includes the following configurations.

REMOTE-CONTROLLED CAR X1 

RETAIL ACCESSORY VIEW

CAR SHELL ASSEMBLY

9204E

9201E

**9203E

PARAMETER**

PRODUCT SPECIFICATION

• Size of graphic carton (lengthWidthheight) 450280170mm
• Size of the car (lengthWidthheight) 375x290x145mm
• The total weight(GW/NW): 2.5/2.7kg
• Wheelbase: 245mm
• Wheel diameter: 105mm
• Drive: 4WD
• Motor: 540 brush driver
• Steering engine: 2.2KG tense
• Battery: 7 .4V lithium battery
• Remote frequency: 2.4GHz
• Remote distance: 100m
• Charging mode: USB balance charging cable

MODEL INSTRUCTION

ASSEMBLY VIEW

DEVICE EXPLOSION DIAGRAM

INSTALLATION OF REMOTE BATTERY

Your remote requires three AA batteries (1.5V*3). The battery compartment is established at the bottom of the remote.

1. Hold and slide the battery compartment to take out of the battery compartment cover.
2. install the battery according to the correct directions of positive and negative anodes, indicated on the battery compartment.
3. Re-install and close the battery compartment.
4. Open the remote to check its state indicator light with red.
5. When the remote is connected to the model, the state indicator is normally on and the model can be operated.

If the remote state LED indicator blinks red, showing a weak battery of the remote or undercharging, or wrong installation. Please change the new or fully-charged battery. The LED indicator is incapable of showing whether the battery is charged fully.

If the LED state indicator of the remote is off. Please check the direction of installing the positive and negative anodes and check whether the battery is charged fully. Please refer to the diagram of the Identification number on page 9 for any other flash signals from the LED.

Use normal battery
Your remote use “1.5V M’ battery and 1:10 RC car batteries are included in this model. You also can your chargeable battery and the (lithium) battery is contained in your remote. Please make sure that chargeable batteries are charged fully according to the instructions of manufacturers. If you use chargeable batteries in your remote, you should know that their power is consumed quickly compared with other alkaline batteries.

Note: When your batteries show low electricity shortage (red lights flash slowly), please stop immediately operating your remote for fear of losing control.

CHARGING BATTERIES

Your remote-controlled car has already had a “USB balance charging cable” and it will take 3 hours and a half to charge the attached batteries. Please connect the SN of the lithium battery to the SN socket of the charging cable, then the USB port of the other end of the USB cable is inserted into the power adapter, and inserted into power to be charged. This LED light will flash green, showing that the battery is charged. After 3 hours, (when the charging is completed, the charger will be green LED), then the battery is removed from the charger which it is removed from the socket.

READY FOR PLAY

INSTALL THE BATTERY PACK FOR YOUR MODEL
Your remote-controlled car has already included a lithium battery pack with 7 .4V. Please install the battery as per the following steps:

1. Remove the buckle from the battery plank and take out of the battery plank.
2. Put the battery into the battery compartment and please make sure that the battery is located in front of the remote-controlled car.
3. Re-install the battery plank and don’t pinch the battery wire. Fix the car shell on the battery plank and disconnect it with the joint of the electronic speed controller at that moment

Note: Be sure to remove the battery tab after the remote-controlled car is operated.

WARNINGS:
LiPo battery is only suitable for advanced users who have been aware of battery risks. It is not recommended that all children below 14 years old operate LiPo batteries under the direction of inexperienced adults. LiPo batteries feature with the lowest safe discharging voltage and over-discharge below its voltage is not allowed. Please strictly obey directions from battery manufacturers and charger manufacturers charge, and it is important for you and users of this product to use and store Li Po batteries. Be sure to your safety and understand how to use a LiPo battery. Please notice that our company has no obligations to install batteries of the model, therefore, we will assume the liability of any special, non-direct, attached or indirect loss caused by using a LiPo battery.

NOTE OF REMOTE OPERATION

This 2.4G remote is equipped with a directional antenna.
In order to obtain the maximum remote scope, please hold the remote to direct vertically the model as soon as possible, and hold the transmitter to get away from the model, which will reduce the radio-frequency region.

MAINTAINING YOUR MODEL

•  When the battery needs to be charged again, make sure that the battery is in a cooled condition.
• Change the direction and rotate the wheel left or right.
• Always move the switch gently.

Your model needs to be repaired in time to ensure its optimal operational state. High attention should be paid to the following steps. Check whether the car has obvious damage or wear. For example:

1. Check whether it has broken, bent or damaged parts;
2. Check whether the wheel hub and steering are installed in place;
3. Check whether it has worn wire lines or connecting rod with a loose connection;
4. Check receiver and remote, and install of electronic speed controller;
5. Check the combination of wheels and tightness of nuts with a spanner;
6. Check remote system, especially battery capacity;
7. Check whether car body or suspension has loose screws;
8. Check whether the wearing of wheel gear, for example, the debris in wheel gear should be taken out in time;
9. Check the tightness of all balls;

OPERATING YOUR MODEL

OPERATING YOUR CAR

BEGINNING

1. Move ESC switch to “ON”, as shown in figure 1.
2. Moving the switch of mobile power to “ON” to turn on the remote. The red LED light will be on. If the red LED light is off, please check whether the battery’s positive and negative anodes of the remote is installed correctly, as shown in Figure 2.
3. When the operational driving has been completed, please turn off the remote power and be sure to remove the power. If the battery connection is not disconnected, it is likely to damage the batteries.

NOTE!
BE SURE TO CORRECT THE CONNECTION BETWEEN THE REMOTE AND THE CONNECTOR BEFORE OPERATING THE CAR.

OPERATIONAL CONTENTS

• Pull the trigger to allow the car to advance slowly, and advance quickly when pulling again.
• Push the trigger forward to stop the car, and drive/reserve in the opposite direction when pushing again.
• When colliding, loosen the trigger.
• When the battery is getting low, car will roll until it stops. The =ped PROTECT the battery.

READY FOR PLAY

• The everlasting first step is to turn on the remote and turn off the remote at last.
  This operation can protect you from the remote receiving other signal sources for interference, or the remote-controlled car will be out of control. The best way for preventing it from losing control is that the operation sequence which the first step is to turn on the remote and turn off it at last should be followed despite it having lost-control protection.

• Please use new or fully-charged batteries for the remote, for a weak battery will limit signals between receiver and transmitter. Its weakness or signal loss will result in lost control of your model and occurring collisions.

• In order to make the remote and receiver in a frequency, receivers of the model must be turned on within 2Os after the remote is connected. If the remote indicator flashes quickly with red, it will be fail connection. If you miss it, close the remote and restart.

REMOTE CONTROLLER

1. When the trigger is pulled back, the vehicle advances
2. When the vehicle is moving forward, push the trigger forward and the vehicle will brake;
3. When the trigger on the remote control returns to the midpoint, push the trigger forward again and the vehicle will retreat.

REMOTE LED CODES

about how to use the remote control on page 9.
Green light with slow flash (on at 0.5s/off at 0.5s )| Hint of low power| For more information m please refer to the operation of putting new battery into the remote on page 6.
Green light with quick flash (on at 0.125s/off at 0.125s)| Connect failed/error| If the transmitter and receiver are bound unsuccessfully, please close the remote system and restart for recovering normal operation. Please check exceeding scope, low battery or damaged antenna if the connection is failed.

FINE-TUNING KNOB OF STEERING

STEERING RATIO KNOB

When the steering wheel rotates, adjust the directional angle by using the steering ratio knob

FINE-TUNING KNOB OF ACCELERATOR
Rotate lefVright using fine-tuning knob of the accelerator. Adjust the speed you like.

REVERSE DIRECTION BUTTON
Considering the habits of more users operating remote, forward, and backward, left and right reverse buttons are launched to enhance users’ experience.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>