INTECO F11613 Smart Silicon Moodlight Ryan User Manual

INTECO F11613 Smart Silicon Moodlight Ryan User Manual

Product Description

How to Use a Product

1. The power button at the bottom of the lamp enables ON/OFF.

2. If you touch the product after pressing the power button, you can change the color of white → ivory → yellow → Color change (White, Ivory, Yellow) → Operates in the off order.

3. When using the app pair the bottom of the pairing mode following
   the app by pressing button for more than 5 seconds and has to work, please. (For more information on how to use the app, see section 3, How to use the Friends Smart App.)

4. If the battery is low, the lamp flashes red. Please use the product after charging it.

5. The charge status light turns red when charging and green when charging is completed.

6. When not in use, press the power button again to turn off the power completely.

How to Use an Application

1. Download the Friend Smart App.

2. Use Wi-Fi to connect the application with the lamp. If you press the pairing button on the bottom of the product for more than 5 seconds,
   The product will flash blue and run pairing mode.
   The pairing mode is executed. When pairing is complete, the red LED will flash and then the blue LED will flash.

3. Enter the Wi-Fi password in the app while pairing mode is running.
   If pairing is successful, the product will flash green and complete the pairing.

4. Various controls are available, such as color temperature control, brightness control, and on/off time schedule.
   This product supports Wi-Fi 2.4GHz network. Both 2.4GHz and 5GHz If you are using a network, please select 2.4GHz from the WiFi list on your phone. (If the pop-up window continues to appear that it is unavailable on Wi-Fi 5G, Item 4 network Please refer to the configuration method.)

How to configure your network

1. Enter 192. 168. 0. 1 or 192. 168.1.1 in the web address bar to access the administrator’s page Product Name Smart Silicon Moodlight_ Ryan Product Name Customer name FCC Statement

2. Please enter your ID and password and log in. (If you don’t know the account, you’re using Please contact your router’s manual or customer service.)

3. Select the management tools menu.

4. Please select the Wireless Settings / Security menu in the menu navigator.

5. Select 2.4 GHz Wi-Fi and select the Apply button at the bottom to complete the setup.

Product specification

• Product Name Smart Silicon Moodlight_Ryan
• Item No. F11613
• Size/Weight 194128154mm/226g
• Material Silicon, ABS, PVC
• Rated voltage 5V / 1A
• Rated current 120mA
• Battery capacity 1000mAh
• charging time about 2 hours
• Usage time about 12 to 15 hours
• Components Product, Type-C cable(80cm), manual
• Country of Origin China
• Data of manufacture 2020.11
• Certification number YU10944-19001
• Electromagnetic compatibility number R-R-I7C-KF-SSML
• Manufacturer’s Name INTECO(Dongguan) Trading Co.,Ltd
• Importer Inteco. / 15F, 31, Hangang-daero,Yongsan-gu, Seoul
• Seller : Republic of Korea
• Customer Service Contact (+82)1577-6263
• Exchange Place Place of purchase

Cautions

1. Do not use the product for anything other than its original purpose.
2. Do not arbitrarily disassemble, modify, or repair the product.
3. Do not use in very cold or hot places, humid and dusty places.
4. Prohibit use in objects and regions with strong magnetic forces that can cause instrument malfunctions.
5. If water seeps in, turn off the power immediately, wipe the outside water, dry it completely in a well-ventilated place.
6. Make sure to use a charger that matches the rated voltage. Improper use of cables and chargers may cause a failure, which cannot be exchanged or returned.
7. The use of high speed charging cables and charge.

Product Warranty

After purchasing this product, please fill out and keep the warranty.

Free service information

Within 30 days from the date of purchase, if abnormality occurs under normal use, within 30 days from the date of purchase For products that are found to be defective, the product itself will be replaced with a new product.

However, it applies only when you bring the product warranty and receipt, and it does not apply in the following cases.

• Appearance damage and contamination

• When the product is disassembled, modified, or used for other purposes

• Product failure or damage due to natural disasters (earthquake, fire, flood, etc.)

• Failure or damage due to the user’s carelessness or failure to comply with the specified precautio Information on paid service
  In the event of a failure or damage within one year of the purchase date, we will only exchange the product for a service charge (including round shipping) if you have a warranty and receipt.

• Paid service is available only if both the product and the included components have been shipped.

• You cannot use the paid service for damage or contamination of the appearance caused by use.

• Parts such as cables and gender are consumables, so they are not covered under warranty.

• Additional shipping costs may be incurred in island-mountain areas.

• If the product is not defective, the customer must bear the return shipping cost.

Exchange and Return Regulations

Purchaser’s simple change is possible within seven days of receipt of the product, and you must carry the receipt without damaging the packaging

If exchange and return are not possible

• In case the product is damaged or lost due to your carelessness
• If the product packaging is damaged and the product value is reduced,
• In case there is evidence of use of the product or the product is damaged.
• In the event of loss or damage to the accessories contained in the product.

This product is manufactured and imported as a complete product, and A/S is not available, and only exchange and return are permitted.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Size/Weight 194128154mm/226g Where to buy Date of purchase Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Material Silicon, ABS, PVC address

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not  installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

• Reorient or relocate the receiving antenna.
  Rated current 120mA

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>