MIBOXER RL1-24 RGB+CCT LED Wall Washer Light Instructions
- June 6, 2024
- MiBOXER
Table of Contents
- MIBOXER RL1-24 RGB+CCT LED Wall Washer Light Instructions
- Features
- Parameters
- Signal transmitting
- Modes synchronization
- Dynamic Mode Sheet
- Installation Diagram
- Connection Diagram
- Link/Unlink
- Attention
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MIBOXER RL1-24 RGB+CCT LED Wall Washer Light Instructions
Features
The light housing is made of aluminium alloy with anodizing technology on the
surface, and stalinite mirror surface with high light transmittance. Widely
used on
building, bridge, showcase,and landscape,etc.
Parameters
24W RGB+CCT LED Wall Washer Light
Model No.: RL1-24 Input Voltage: AC100~240V 50/60Hz Power: 24W
Working Temperature: -20~60°C Color Temperature: 2700K~6500K Luminous Flux:
1800LM
PF: >0.9 CRI: >80 Lifespan: 50000h Beam AngIe: 15*60° lllumination Distance:
15m IP Rate: IP66
RF: 2.4GHz Control Distance: 30m Product Weight: 2.36kg.
48W RGB+CCT LED Wall Washer Light
Model No.: RL2-48 Input Voltage: AC100~240V 50/60Hz Power: 48W
Working Temperature: -20~60°C Color Temperature: 2700K~6500K
Luminous Flux: 3200LM PF: >0.9 CRI: >80 Lifespan: 50000h Beam AngIe: 15*60°
lllumination Distance: >20m IP Rate: IP66 RF: 2.4GHz Control Distance: 30m
Product Weight: 2.36kg.
Signal transmitting
One lighting fixture can transmit the signals from the remote control to
another lighting fixture within 30m, as long as there is a lighting fixture
within 30m, the
remote control distance can be limitless.
Modes synchronization
Different lighting fixture can work synchronously when they are started at different times, controlled by the same remote, under same dynamic mode and within 30m distance.
Dynamic Mode Sheet
| Number | Dynamic Mode | Brightness / Saturation / Speed |
|---|---|---|
| 1 | Mardi gras | **** |
Adjustable
2| Automatic color change
3| Sam
4| Gemstone
5| Twilight
6| American
7| Fat tuesday
8| Party
9| Slow color splash
Installation Diagram
Connection Diagram
Link/Unlink
Compatible with these remote controls (Purchased separately)
Lighting can be working after linking with remote; for more details, pls read the remote instruction.
Attention
- When installation, Please switch off power, and switch on power after assuring the correct wiring.
- The light is with waterproof and damp-proof design.Waterproof rate is IP66; it can be working normally in the rain, but cannot work under water.
- The working temperature is -20~60°C, please do not install the light on the area over 60℃ to assure the lifespan.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>