Sunco PN22_DU-WH-4060K LED Ceiling Panel 2×2 User Manual

Sunco PN22_DU-WH-4060K LED Ceiling Panel 2×2

Product Information

The 2×2 Dual Selectable Ceiling Panel is a lighting solution designed to provide improved lighting. It is manufactured by an American company, Sunco. The product SKU is PN22_DU-WH-4060K. The ceiling panel comes with various accessories and is compatible with dimmers from different brands such as Lutron, Leviton, and Legrand. It has a voltage of [voltage], wattage of [wattage], power factor of [power factor], beam angle of [beam angle], and weight of [weight]. The housing material is [housing material] and the panel is dimmable. The average lifetime of the panel is [average lifetime] and it produces [lumens] lumens of light. It has a temperature range of [temperature range] and operates at [frequency]. The panel has a high efficacy and comes with a warranty.

Product Usage Instructions

1. Before starting the installation, ensure safety by turning off the circuit breaker.
2. If using the recessed mount installation method
   • Place the ceiling panel face down on a flat surface and unscrew the 2 driver covers.
   • Pop out the desired knockout for conduit placement.
   • If using a dimmer, pop out the second knockout.
3. If using the suspension mount installation method
   • Place the ceiling panel face down on a flat surface and unscrew the 2 driver covers.
   • Pop out the desired knockout for conduit placement.
   • If using a dimmer, pop out the second knockout.
4. Connect the conduit to each knockout and feed the wires through.
5. Connect the supply and junction wires using wire nuts
   • Black to Black (Live)
   • White to White (Neutral)
   • Green to Green (Ground)
6. If using the dimming feature, connect the pink and purple wires on the ceiling panel to a compatible dimmer (not included).
7. Replace the driver covers and tighten the screws.
8. Bend the two protective brackets located on the back of the ceiling panel up 90 degrees.
9. Turn the brackets 90 degrees so that the hook faces the outside edge of the ceiling panel.
10. If using the suspension mount installation method, adjust the support rope/wire to ensure the ceiling panel is level.
11. Turn on the circuit breaker and test the light.

If you encounter any issues or need further assistance, please contact Sunco’s support team at support@sunco.com or call 844-334-9938.

What’s in the Box?

Ceiling Panel

Before You Start

Safety Information
To reduce the risk of fire, electric shock, or physical injury

• Turn off circuit breaker before installing this fixture.
• Suitable for use in wet environments at temperatures ranging from -4° to 113°.
• Not for use where directly exposed to water.
• Not intended for use with emergency fixtures.
• Not compatible with photo controls.
• Not compatible with occupancy sensors.
• Not compatible with third party sensors.
• Not compatible with all dimmers. For more dimming information, please visit www.sunco.com.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions

1. This device may not cause harmful interference.
   • Not compatible with timing devices.
   • All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.
   • Please review installation manual carefully before proceeding. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
2. This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

Wiring Diagram

Installation Guide (Recessed Mount)

STEP 1

• Turn off circuit breaker before installation.
• Place Ceiling Panel face down on flat surface. Unscrew 2 driver covers and set aside screws. Pop out knockout (choice of 6).
• Optional: if using dimmer, pop out 2nd knockout.

STEP 2

• Use switches to choose CCT and brightness settings
• Brightness CCT
  • 30W -4000K
  • 35W -5000K
  • 40W -6000K
• Connect conduit to each knockout. Feed wires through.

STEP 3

• Connect supply and junction wires using wire nuts. Black to Black (Live): White to White (Neutral): Green to Green (Ground).
  • Optional : To use dimming feature, connect pink and purple wires on Ceiling Panel to compatible dimmer (not included).

STEP 4

• Replace drive covers. Tighten screws.
• Bend 2 protective brackets located on back of Ceiling Panel up 90o.

STEP 5

• Turn brackets 90o. Hook should face outside edge of Ceiling Panel.

STEP 6

• Turn on circuit breaker and test light.

Installation Guide (Suspension Mount)

STEP 1

• Turn off circuit breaker before installation.
• Place Ceiling Panel face down on flat surface. Unscrew 2 driver covers and set aside screws. Pop out knockout (choice of 6).
  • Optional: If using dimmer, pop out 2nd knockout.

STEP 2

• Use switches to choose CCT and brightness settings: Brightness CCT
  • Brightness CCT
  • 30W -4000K
  • 35W -5000K
  • 40W -6000K
• Connect conduit to each knockout. Feed wires through.

STEP 3

• Connect supply and junction wires using wire nuts. Black to Black (Live): White to White (Neutral): Green to Green (Ground).

STEP 4

• Optional : To use dimming feature, connect pink and purple wires on Ceiling Panel to compatible dimmer (not included).

STEP 5

• Replace drive covers. Tighten screws. Drill 2 holes into ceiling.
• Place anchors into hole, insert wire rope, and screw.

Refer to suspension kit’s (not included) install manual for complete details.

STEP 6

• Adjust support rope/wire to ensure Ceiling Panel is level.
• Turn on circuit breaker and test light.

Product Details

Recommended Dimmers

Specifications

Common Troubleshooting
Feeling in the dark about an issue with your product? No worries! Our troubleshooting section is here to shed some light and provide you with easy- to-follow solutions for any problem.
If you still need some assistance, please feel free to contact us with any questions. Our team of lighting experts are happy to help brighten your day.

Light Distribution Angle

Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area. There are two main types of lighting distribution angles

A symmetric lighting distribution emits light evenly in all directions, creating a cone-shaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up-lighting.

An asymmetric lighting distribution angle, also known as beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spill in other areas. Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more.
It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.

Customer Support

Warranty Policy

• This product is covered by our
• industry leading 7 year warranty.
• It gets even better – scan the QR code for 2 extra years of protection!

30 Day Return Policy

• At Sunco we value our customers and stand by the quality and performance of our products.
• If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.

Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at

• Email:   support@sunco.com
• Text or Call: 844-334-9938
• 6AM – 6PM PST Monday – Friday

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>