Lepro GU10 Smart LED Light Bulbs User Manual
- June 6, 2024
- Lepro
Table of Contents
Lepro GU10 Smart LED Light Bulbs
http://smartapp.tuya.com/lampuxledbrighter
DOWNLOAD
Install the light
Turn on the phone’s Bluetooth and connect to the WiFi network
WARNING: Does not support manual dimmer.
Follow the on-screen steps to finish set up.
Reset the light before pairing
How to reset the light
-
Switch on the light and keep it on for at least 10s. Then turn it off for 4-5s, go to the next step.
-
Make sure the light blinks rapidly, if not:
Turn the light ON-OFF-ON-OFF-ON (Leave 1-2s between the off and on positions.)
-
Wait for 2-3s until the light blinks rapidly.
LE Innovation Inc
3651 Lindell Rd Ste D, Las Vegas, NV 89103, USA
www.lepro.com +1
866-287-2558
cs.oc@lepro.com
Manufacturer / Hersteller:
LE Innovation Limited
One Spencer Dock, North Wall Quay, Dublin 1, D01 X9R7, Ireland
www.lepro.de +49
800-723-6202
cs.oc@lepro.de
UK Importer:
Lighting EVER Ltd.
93 Addy House, Rotherhithe New Road, London, SE16 2PD, United Kingdom
www.lepro.co.uk +44
800-802-1244
cs.oc@lepro.co.uk
Made in China Hergestellt in China Fabriqué en Chine
Set up Voice Control (Optional)
Method A
Method B
If the light does not work, please go to Amazon Alexa or Google Home APP and click DISCOVER DEVICES.
Automation & Timer (Optional)
*SKUs:**
PR902004-EU-2 PR902004-EU-4
PR902005-EU-2 PR902005-EU-4
Smart Lighting Holding Limited claims SKUs* meet the Radio Act 2014/53/EU. A complete Declaration of Conformity can be downloaded with this link: https://www.lepro.com/docs/
FCC
Federal Communication Commission (FCC) Statement for Users Warning: Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>