Lepro DEPU87762157 LED Light Strip Instruction Manual
- June 5, 2024
- Lepro
Table of Contents
DEPU87762157 LED Light Strip
Instruction Manual
Package list
LED Light Strip
Controller
Connecting cable
Chager is not included
Mounting Buckles x6
Specification
3.5W,5V 0.754, 0.5 m(1.64 ft)x4 pcs, 60 LEDs, -10 C–40 C/14 F–104 F
Notice
- Unroll the strip light before usage.
- Connect to the APP properly before installation.
- Do not block the controller with metal objects.
- Do not connect more than 4 light strips in a series.
- Luminaires are not suitable for direct mounting on normally flammable surfaces.
- Luminaires are not suitable for covering with thermally insulating material.
Installation
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Where breakage or damage to lamps occurs the chain must not be used/energized but disposed of safely.
- FOR INDOOR USE ONLY.
This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.
The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
LE Innovation Inc
3651 Lindell Rd Ste D, Las Vegas, NV 89103, USA
www.lepro.com +1
866-287-2558 cs.oc@lepro.com
Manufacturer / Hersteller:
LE Innovation Limited
One Spencer Dock, North Wall Quay, Dublin 1, DO1 X9R7, Ireland
www.lepro.de +49
800-723-6202 cs.oc@lepro.de
UK Importer:
Lighting EVER Ltd.
93 Addy House, Rotherhithe New Road, London, SE16 2PD, United Kingdom
www.lepro.co.uk +44
800-802-1244
cs.oc@lepro.co.uk
3 STEPS TO PLAY!
http://smartapp.tuya.com/lampuxledbrighter
Select the 2.4GHz Wi-Fi network your phone is connected to.
Click the relevant icon to link Alexa SKILL or Google ACTION.
If the light does not work, please go to Amazon Alexa or Google Home APP and click DISCOVER DEVICES.
Smart Lighting Holding Limited claims PR904102-RGB meets the Radio Act 2014/53/EU. A complete Declaration of Conformity can be downloaded with this link: https://www.lepro.com/docs/
FCC
Federal Communication Commission (FCC) Statement for Users Warning: Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules, Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference. and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Warning:
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2)This device must accept any interference,
including interference that may cause undesired operation of the device.
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>