rock space RSD0611 AC1200 Dual-band Smart WiFi Router User Manual
- June 6, 2024
- rock space
Table of Contents
Dual-band Smart WiFi Router
Model No: RSD0611
Website: www.rockspace.hk
Support Email: router@rockspace.cc
Computer Setting
Click:’ (Start] — (Control Panel] — Network and Internet — (Network and Sharing Center] — (Change adapter settings] — (Local Area Connection] “. select the connected network card. Then right click ‘Local Area Connections, select (Properties]
Select (Internet Protocol Version 4 (TCP/IPv4) ] , click (Properties]
Select (Obtain an IP address
automatically] , (Obtain DNS Server address automatically] , click (OK] Return
back to the previous interface and click (OK]
Router setting
Open the browser, input and connect: http://192.168.1.1 input user name “admin” and password “admin” Click “Next”
Setup Operation Mode
The device support various opration modes, which allows you to use different interfaces for NAT and bridging. Select proper operation mode accordance to your network topology. Default Gateway Mode.Click “Next”.
Setup Time Zone. Click “Next”.
Setup LAN Settings. Click “Next”.
Setup WAN Settings
Here you can also set the connection types. The router supports three common
connection types: fixed IP, obtaining IP automatically and PPPoE dial-up.
Auto Config(DHCP)
Fixed IP
PPPoE Dial-Up
Wireless 5Gliz Basic Settings
Wireless SGHz Securiry Settings
Wireless 2AGHz Basic Settings
WirNess 2AGHz Security Settings
wireless connection:( Here we take an win 7 for instance)
Cack’Start —Control Panel—Network and Internet—Network and Sharing Center—Change adapter settings—Wireless Network Connection’, Then right click–Wweless Network Connection’. select–ConnecUDisccanocr.
Select the wireless network name (SSID) in the voteless network list. dick ‘Connect.”
Enter Wi.fl
key, cick
Note: the default SSID and Network Key is on the product label on the bottom
Connection is successful
FAQs
How to reset to defaults?
Keep pressing the Reset button near to the wan port and guarantee the device is in power, releasing it after 5-10 seconds.
The laptop can not search out the wifi signal?
a. If your laptop is with a built-In wireless adapter, please confirm that the
wireless adapter is working or not.
b. Check the wireless service in the laptop IS open or not. Methods is as
below: Right-dick “my computer”,choose ‘management.then chooses nice and
appear/MOW, Cheek then wireless Zero Configuration* in the ‘Service ‘page. If
the stage Is not open, please right-click ‘wireless zero configuration and
dick ‘open’. If the open type shows it is for bidder please right-click and
choose the attribute. change the open type to automatic. then change the state
to open.
C. Confirm the redress function of Router IS opening.
d. Check the driver of the wireless adapter li the device manager is
Successfully installed or not.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>