rock space AC2100 Dual Band Gigabit Installation Guide
- June 5, 2024
- rock space
Table of Contents
AC2100 Dual Band Gigabit
**Installation Guide
**
AC2100 Dual-Band Gigabit
WiFi Router (RSD0614)
Quick Installation Guide
Technical Support:
Phone: 1-833-816-6558 (EST: 9:00-17:00
/ PDT: 06:00-14:00 Monday to Friday)
Email: [email protected]
Website: www.rock space.HK
Basic Installation
If you want to copy the PPPoE user name and password from your original
router, start from Step 1. Otherwise, start from Step 2.
Step 1: Input your PPPoE user name and password from your original router.
- Power on your original and new routers.
- Connect the WAN port of the original router to a LAN port of the new router using an Ethernet cable.
- When the WAN and LAN LED indicators of the new router turn solid on for 3 seconds after blinking fast, the PPPoE user name and password are inputted to your new router successfully.
- Remove the original router.
Step 2: Connect your new router to the Intern et.
- Power on the new router.
- Connect the WAN port of the new router to the LAN port of your modem or the Ethernet jack using an Ethernet cable. The WAN LED indicator lights on.
on
Wireless Network Settings
Method 1: Setup via RS WIFI APP Instructions for mobile phones with IOS 11
below
Before you start, download the RS WiFi App on your mobile device phone is used
for illustration here.
1Connect your smartphone to the WiFi network of the router (the is labeled on
the bottom of the router).
3. The App will detect your Connection Type automatically. If your Internet connection type is PPPoE, enter your PPPoE user name and password and tap *Next’. If your internet connection type is dynamic IP. tap “Next”. If your Internet connection type is static IP, enter your IP address and other Information your ISP provides, and tap “Next”.
5.
Tap OK.
After the configuration is completed, Android phones will connect to the WiFi
network you just set automatically. ‘Phone users need to connect to the new
WiFi network manually. Then, you can access the Internet and manage your WiFi
network on the RS WiFi App.
Instructions for mobile phones with IOS 11(and above) & Android Before you
start, download the RS WIFI App on your mobile device (smartphone or tablet).
A smartphone is used for illustration here.
Open RS WWI App and make sure that your device does not connect to the WiFi
3. Click Join, and wait for about 10 seconds;”
4. Select Connection Type after being successfully connected. The App will
detect your Connection Type automatically. If your Internet connection type is
PPPoE, enter your PPPoE user name and password and tap ‘Next’. If your
Internet connection type is dynamic IP, tap “Next”. If your Internet
connection type is static IP, enter your IP address and other information your
ISP provides, and tap “Next”.
5. Customize your private WiFi name and password
6. After setting up the router, you could go back to the setting page of the
App and reconnect the wife with your personal account and password
7. Finish wifi connection and return to the App, click Control Now to manage the router.
WiFi Name & Password
this section, you can view and change the Win name and password of the WWI
network of the router.
Procedures:
Step 1 Open the RS WiFi App, and choose Tools > WiFi Name & Password.
Step 2 Customize the WiFi Name and WiFi Password.
Step 3 Select a Security Mode (WPA/WPA2 mixed is recommended).
Step 4 (Optional) Enable Hide Win Network
Step 5 Tap Save.
Notes: Please wait with patience if the router takes a bit longer to
reboot at the last step of the settings.
Method 2: Web UI Setting
Internet Setting Login in via IP Address:
Step 1. Connect to the wireless network (the SSID name of the router has
been provided on the back of the router, which could be customized in the
following settings)
Step 2. Open your browser on your device and enter 192.168.0.1 in the
address bar and press Start on the start page.
Step 3. Select your Connection Type. The router supports three connection
types: PPPoE, Dynamic IP Address, and Static IP Address. The auto-
configuration will show up here. You could select the specific kind of
connection type that fits in your network by providing information as
required. Click “Next”.
NOTES: If your Internet connection type is PPPoE, enter your PPPoE user
name and password and tap “Next. If your internet connection type is dynamic
IP, tap “Next’. If your internet connection type is static IP, enter your IP
address and other information your ISP provides, and tap “Next”.
Step 4. Here comes the SETUP page. Personalize your network by inputting a
name and password for it. You can also share the wifi password with the login
password, otherwise, input another one down below for the login password.
Click “Next”.
After this setting, the router will reboot again. Go to your wifi network list
and find the SSID named by yourself. Connect to the AC2100 router by entering
the new password.
Step 5. Open your browser on your device and enter 192.168.0.1 in the
address bar and input your login password (which has been set before). Click ”
Login”
Step 6. Here you are successfully connected to the new wifi network and
you can customize the functions you need on this page. There are different
settings on the left side.
Dual-Band Setting
-
Goes to WiFi Setting right on the left column and select WiFi Name & Password, you could customize your private network name and password here.
-
Close the button of the Selection Unify 2.4GHz & 5GHz, you could modify WiFi SSID Name and Password separately for two bands and then click lave”.
-
The router will reboot and you can reconnect by applying the new customized network SSID and password in a few seconds.
Firmware Upgrade
Go to System Setting and choose firmware upgrade. The latest version would be available if there’s one. You could select the online upgrade or local upgrade here.
FAQ
Q: How can I reset the router?
A: Keep pressing the Reset button for about 3 seas and guarantee that your
device is on power. Release it and it will reconnect within 10 seconds.
Q: What if I forget the password of the router?
A: You can reset the router and login Into the router to set It up again. Go
to Tools>WIFI Name & Password to customize It for your own.
Q: Flow can I update the firmware?
A: Go to the RS WiFi app and choose Tools>System Update>Upgrade Now. Do not
power off the router during the process. The router will reboot when the
update is finished. You should turn off the wifi connection and reopen it to
connect the mesh. Go to the app and it will automatically recognize the device
you have. Click Control Now and the update for the newest firmware is
successful.
Q: How can I select my connection type?
A: You can follow the route: Tools>internet Settings and choose the type you
want or consult your ISP for reference.
Q: Why cannot my device connect to the 5GHz WWI signals?
A: Please make sure that your 5GHz band is on and not be hidden. In this case,
you can check the status of 5GHz through Tool s>WIFI Name & Password. Turn on
the5GHz band if it’s off. Otherwise, you should make sure your devices are
supporting 5GHz signals. Only those support 5GHz signals could be detected and
connected.
Q: What If the app could not recognize the device or connect to the
device?
A: First please make sure that your Ethernet cable with an Internet connection
is securely plugged into the WAN port rather than the LAN port. Please make
sure that your routers are securely connected to the SSID that belongs to the
mesh network.
Follow the steps below:
Step I. Click the WiFi Name of the router right on the upper left side;
Step 2. Click the “+.and choose Router to add your device:
Step 3. The app will detect the device In this case and click Control Now
to get it to work. Connection Is now successful. This approach could be
applied In any situation when you reconnect the router and it fails to react
Immediately.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
8 digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur In a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
Installation Instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Contact
Shenzhen Renqing Excellent Technology Co., Ltd.
Address:104, No.15. Longfu Industrial Zone, Huarong Road
Tongsheng Community, Dalang Street, Longhua District. Shenzhen, China
Email: [email protected]
Website: www.rock space.hk
Technical Phone
Support: +1(83318166558
Service Time: EST: 9:00-17:00 / PDT: 06:00-14:00,from Monday to Friday