QFX Portable Bluetooth Speaker PBX-800TWS User Manual

: June 6, 2024
: QFX

Table of Contents

Product Overview
SPECIFICATIONS
POWER SOURCE
Control Panel Function
TWS (TRUE WIRELESS STEREO) PARING 2 PBX-800TWS
REMOTE CONTROL
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QFX Portable Bluetooth Speaker PBX-800TWS User Manual

Product Overview

TREBLE: Treble Boost.
BASS: Bass Boost.
Power: (OFF/ON)/ VOLUME Gain.
LED LIGHT: Charging Light Indicator.
RED=Charging Light OFF = Fully Charged
DC Input: 5V 1A min.
ECHO: Echo Volume.
MIC.VOL: Microphone Volume.
Next: Next Track or FM Station.
Play/Pause/TWS: Play or Pause Track. TWS Button
Previous: Previous Track.
MODE/LED SW: Toggle Through BT, USB, TF, AUX, FM Radio.
Press and hold to turn OFF/ON lights.
USB/ TF Input: insert USB or TF Card.
AUX Input: 3.5mm TRS cable.
MIC Input: 6.35mm TS or TRS cable.

SPECIFICATIONS

Frequency Response for main speaker: 38Hz-20KHz
Power Supply: DC5V
Maximum battery life based on minimum power and volume settings

POWER SOURCE

Please charge the unit at least 4 hours before the first time use.
Twist the dial clockwise/anticlockwise to switch ON/OFF the unit.
CHARGE THE BATTERY

Control Panel Function

When the battery is charging, the CHARGE STATUS light display is red. After the battery has fully charged, the light will turns off.

Connect the USB charge cable to the DC5V Input of the speaker
When the battery is fully charged, please disconnect the USB charging cable from the speaker.
The speaker works normally while charging.
VOLUME:
Twist the dial clockwise/anticlockwise to Increase/Decrease the volume.
PREVIOUS/NEXT:
Use the PREVIOUS/NEXT button to go to the previous or next track.
PAUSE/PLAY/TWS:
Use the PLAT/PAUSE/TWS button to play or pause the current track. Use this button for TWS sync.
MODE:
Press to toggle through Modes (BT, USB, TF, AUX, FM). Pres and hold to turn the lights ON/OFF.
AUX IN: Insert a 3.5mm (TRS) Aux cable for external audio devices
MIC IN: Insert a 6.35mm (TS or TRS) cable.
USB/TF Card Port: Insert a USB or TF card for playback.
Single Repeat
When in USB or TF card mode, use this function to repeat tracks
FM FUNCTION
Press the MODE button to switch to FM mode. Press PLAY/PAUSE/TWS
button on control panel to automaticlly scan through the radio stations.
Use the PREVIOUS/NEXT buttons to select a previous or next radio station.
Press 0~9 from remote to choose an FM stored station.
Bluetooth:
Use the MODE button on the control panel to select Bluetooth mode.
Simultaneously open the Bluetooth setting on your mobile device and search for “QFX PBX-800TWS”. Connect for Bluetooth playback.

TWS (TRUE WIRELESS STEREO) PARING 2 PBX-800TWS

Step 1: Use the Mode button to enable Bluetooth mode on each speaker. The display will read “BLUE”.
Step 2: When both speakers are in Bluetooth mode, press and hold the TWS button for 3 seconds. You will hear a sound and the speakers will connect together.
Next time you put both speakers in Bluetooth mode at the same time, they will connect automatically
Step 3: On your mobile devices’ Bluetooth settings, search for “QFX PBX800TWS”. If your TWS paring process was successful you should only see one “QFX PBX-800TWS” to choose from. Select the “QFX PBX-800TWS” and enjoy True Wireless Stereo (TWS).