QFX PBX-BF8SM Portable Battery Speaker User Manual
- June 6, 2024
- QFX
Table of Contents
PORTABLE BATTERY SPEAKER
User Manual
PBX-BF8SM
Control Panel Function
REMOTE CONTROL
- TREBLE: Treble Boost
- BASS: Bass Boost
- VOLUME/OFF/ON: Volume Control and OFF/ON Knob
- CHARGING LIGHT: RED=Charging LIGHT OFF = Fully Charged
- DC INPUT: 5V, 1A min
- ECHO: Echo Control
- MIC.VOL: Microphone Volume Control
- NEXT: Next Track or FM Station
- PLAY/PAUSE/TWS: Play/Pause Track. TWS Sync.
- PREV: Previous Track or FM Station
- MODE: Select Modes, BT, AUX, USB, TF, FM Radio
- TF/USB PORT: Insert TF/USB Device
- AUX INPUT: 3.5mm TRS Jack
- MIC INPUT: 6.35mm TRS Jack
SPECIFICATIONS
Frequency Response: 38Hz-20KHz
Power Supply: DC5V
*Maximum battery life is based on minimum power and volume settings
POWER SOURCE
- Please charge the unit at least 4 hours before the first use.
- Turn the dial clockwise/anticlockwise to switch ON/OFF the unit.
CHARGE THE BATTERY
When the battery is charging, the LED Display will show a red icon. Once the battery has fully charged, the red icon will turn off.
- Connect the USB charging cable to the DC5V Input (5V, 1A is recommended).
- When the battery is fully charged, please disconnect the USB charge cable from the speaker.
- The speaker works normally when charging.
VOLUME
Turn the dial clockwise/anticlockwise to increase or decrease the volume.
PREV/NEXT
Press PREV/NEXT button to get back to a previous or next track.
PAUSE/PLAY
To stop playing the current track, please press the PLAY/PAUSE/TWS button on
the control panel. Press it again to continue playing.
MODE/LED SW
Press and hold to turn ON/OFF the LED lights. Press to select a mode:
Bluetooth, FM Radio, AUX, USB, TF.
AUX INPUT
- Connect an audio cable (3.5mm TRS) to an external audio device. Select the AUX function using the MODE button.
MIC INPUT
Plug in the 6.35mm TRS microphone cable for direct use.
USB/TF PORT
Insert USB/TF for .mp3 music playback. Press the REP button to repeat a sing
track, press again to exit repeat mode.
FM FUNCTION
Press the MODE button to toggle to FM mode. Press the PLAY/PAUSE/TWS button for automatic frequency station scan. Use the PREV and NEXT buttons to change radio station. Use the remote control to enter digits 0-9.
Bluetooth:
Use the MODE button to select Bluetooth mode on the speaker. Open the
Bluetooth setting on your mobile device and select “QFX PBX-BF8SM”. Once
paired, select music from your mobile device for wireless playback.
TWS (TRUE WIRELESS STEREO) PARING 2 PBX-BF8SM
Step 1: Use the Mode button to enable Bluetooth mode on both speakers. Display
will show Bluetooth.
Step 2: When both speakers are in Bluetooth mode, press and hold the TWS button for 3 seconds on one of the speakers. You will hear a sound and the speakers will connect together. Next time you put both speakers in Bluetooth mode at the same time, they will connect automatically
Step 3: On your mobile device enable bluetooth and search for “QFX PBX-BF8SM”. Connect to pair your mobile device and the speaker. If your TWS speaker paring was successful you will only see one “QFX PBX-BF8SM” to choose from. Select the “QFX PBX-BF8SM” and enjoy True Wirless Stereo.
REMOTE CONTROL
- Power: Standby
- Play/Pause: Play and Pause track
- EQ Mode: Change EQ modes
- Number Keys: 0-9
- Mode: Select from BT, AUX, USB, TF, FM
- Mute: Mute Volume
- Prev: Previous Track or FM Station
- Next: Next Track or FM Station
- Volume +/-: Increase or Decrease Volume
- RPT: Repeat mode for USB/TF Card
- USB/TF: Enable USB/TF Card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>