maxell B13-TW Bass True Wireless Earbuds User Manual
- June 6, 2024
- Maxell
Table of Contents
Left and right unit pairing
After power is on, the left and right units will automatically pair. Once paired successfully, you will hear an indication voice ‘Connected”, the right LED light will flash red and blue alternately, the left LED will flash blue slowly. You just need power on the two units and pairing will be automatic.
3) Pairing with device
Activate the Bluetooth function on your Bluetooth device (phone or music
device). Please refer to the manufacturer’s instructions for instructions on
enabling Bluetooth on your device. Once you have activated Bluetooth on your
device, select thecB13-TW” from the list of available Bluetooth devices. If
required, enter the password ‘0000’ to confirm & finalize the pairing.
4) Calling
Both units support voice calls.
5) The right and left earbuds can be used independently
6) The Power Button function
Power on : Hold the Power Button of the right and left unit for 3 seconds to
power on.
Pairing: Automatic pair of the two units.
Reject incoming call: Hold the Power Button for 2 seconds to reject an
incoming call.
Play/Pause: Short press any Power Button to pause playing musk during music
play.
End a call: Short press any Power Button to end a call while calling.
Redial last number: Double press any Power Button to redial the last number.
Specification:
Battery capacity (400mAh)
Working Voltage and Amps: 3.7V-, 16mA
Speaker Output: 2mW
Battery Capacity: 60mAh
Earbud: 60mAh/3.7V Polymer lithium battery.
Charging Box: 400 mAh/3.7V Polymer lithium battery.
Play Time: 6 hours & 36 hours with a case
Standby Time: 60h
Call Time: 2.5H
Charging Time: Charging the Earbuds 1 Hr, Charging the Battery Case 4 Hrs
Bluetooth Version: 5.0
WARRANTY INFORMATION:
Maxell warrants this product to be free from all defects for a period of 90 days from the date of original purchase. This Warranty does not apply to normal wear or damage due to accident, abnormal use, misuse, or neglect. This Warranty only applies to personal and individual use of the product and not for commercial, institutional, or any other use. Any defective item will be replaced, at no charge, upon reasonable confirmation by Maxell of its defective condition, if returned with proof of purchase to an authorized Maxell dealer or directly to Maxell Warranty Replacement 3 Garret Mountain Plaza, Suite 300, Woodland Park, New Jersey 07424. Neither Maxell nor any authorized Maxell dealer shall be liable for consequential damages arising from this Warranty unless otherwise provided by law.
Connect the USB charging cable to a computer USB port and the Micro USB plug to the charging port of the device. The LED light flashes blue rapidly. It takes around 4 hours to fully charge. When the battery is fully charged, the LED light will stay blue. The charging case will charge the earbuds when it is charged.
Charging the earbuds:
Put the earbuds into the charging case (please put the “right” unit in the
slot with the “R” mark, but the “left” unit in the slot with the “L” mark) for
automatic charging. The earbud’s red LED light turns on while the earbuds are
charging. It takes about 4 hours to fully charge. When the battery is fully
charged, the LED light will turn blue. 1 minute later the LED light will turn
off.
When both earbuds are fully charged, the charging case will turn off the
charging function automatically and turn to standby.
The function instructions:
- Power on The earbuds will automatically flash red and blue to indicate it’s in pairing mode when you pick them up from the charging case.
FCC INFORMATION:
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>