hama 00014167 Bluetooth Hands Free Set for Cars with AUX-In Instruction Manual

hama 00014167 Bluetooth Hands Free Set for Cars with AUX-In

Operating instruction

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Controls and displays

• 1. 12V USB car charger (max. 2.1A)
• 2. Multi-function key for call pick-up / termination / Play / Pause
• 3. Microphone
• 4. Button for bass amplification
• 5. 3.5 mm plug
• 6. USB plug for power supply
• 7. Button for next track and louder
• 8. Button for previous track and quieter
• 9. Blue status LED

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

• Bluetooth® hands-free facility
• 12 V USB charger
• 1 self-adhesive hook and loop strip
• These operating instructions

Safety instructions

• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating and use it in dry environments only.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Do not allow yourself to be distracted by the product when driving a vehicle. Always pay attention to the surrounding traffic and your environment.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limitsspecified in the technical data.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not modify the device in any way. Doing so voids the warranty.
• Use the product only for the intended purpose.
• Only use the article under moderate climatic conditions.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not use the product in a damp environment and avoid splashing water.
• Do not use the product in areas in which electronic products are not permitted.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.
• Ensure that the product is securely mounted before every journey.
• When using this product, observe the applicable local traffic laws and regulations.
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not blocked or restricted.

Risk of electric shock (car)

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the charging cable, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Note – 12 V line voltage
The charger is compatible with a line voltage of 12 V.

Note – Car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition has been switched off. You should therefore disconnect the product from the line connection when not in use to protect your car battery from being drained.

Note – Car charger
• On some types of vehicle, the ignition must be switched on for the voltage to travel to the car socket. For more information, please refer to your vehicle’s owners’ manual.
• Use the enclosed car charger only to charge this device.

Getting started

Position the supplied hook and loop strip in a suitable place in the car and attach the Bluetooth hands-free facility to it.

Connect the 3.5 mm jack plug (5) to the car’s AUX socket.

Plug the USB car charger (1) into the car’s cigarettelighter socket and then connect the USB plug (6)  on the Bluetooth hands-free facility to the USB car charger.

You can now connect your transmitting device (e.g. smartphone) to the Bluetooth hands-free facility.

Operation

First connection via Bluetooth® (pairing)

Note

• Make sure that your Bluetooth®-capable device is switched on and that Bluetooth® is activated.
• For more information, please refer to the operating instructions of your device.
• Connect the Bluetooth® hands-free facility using the 3.5 mm jack socket (or AUX) to the receiving device (e.g. on the car radio).
• To supply power to the device, the supplied USB car charger must be plugged into the car’s cigarette lighter socket and the USB plug on the BT hands-free facility must be connected to the USB car charger.
• The status LED (9) starts to flash blue and the device is in search mode.
• Then activate the Bluetooth® function on your transmitting device (e.g. smartphone) and select the device “BT61”.
• The status LED (9) lights up solid blue – the device is paired and ready to use.

Note – Bluetooth® password
• Some devices require a password in order to connect to another Bluetooth® device.
• If your device requests a password to connect, enter the password 0000, 1234, 1111 or 8888.

Terminating the connection
• To switch off the device and terminate the connection, unplug the USB plug (6) from the USB car charger (1).

Automatic connection

• To reconnect to the Bluetooth® receiver, simply plug the USB plug (6) back into the USB car charger (1).
• The last transmitting device is pre-set to ensure fast connectivity.
• If this does not work, establish a new connection (see Point 6.1 Initial connection via Bluetooth®).

Accept calls

• Pressing the multi-function key (2) once allows you to accept a call.
• To end it, press the multi-function key again.
• To reject a call, press and hold the multi-function key for around 2 seconds.

Bass amplification
To activate the bass amplification function, press and hold the button (4) until the symbol lights up blue.

Charging devices

Warning – Connection of devices

• Before connecting a device, check whether it can be adequately supplied with the charger’s current delivery.

• Ensure that the power of the connected device does not exceed 10.5 W.

• Note the instructions in your device’s operating manual.
  Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:

• Connect your device to a USB charging port using a suitable USB cable.

• Then connect the charger to the on-board electrical system’s car socket.

• The charging process is displayed on your device.

• Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.

• Then disconnect the charger from the line connection.

Button functions

Call

Accept calls :                           Brief press
Reject :                                    Long press
Hang up :                                Brief press

Music control
Increase volume :                    Long press
Decrease volume :                   Long press
Bass amplification :                 Brief press
Next track :                             Brief press
Previous track :                       Brief press
Play/Pause :                            Brief press

Status LED
In operation /
connected                               Solid blue
Attempting to connect           Flashes blue

Care and maintenance

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
• Ensure that no water is able to enter the product.

10.Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.

Technical data

Connection 3.5 mm jack plug
Max. range 10 m
Cable length 1 m
Power supply 12 V USB car charger
Bluetooth® version                                                       5.1
Frequency band(s) 2.40 GHz – 2.48 GHz
Maximum radiofrequency power transmitted                 Max. 4 dBm

Recycling information

Note on environmental protection:
Following the implementation of European Directive 2012/19/EU and 2006/66/EU into the national legal systems, the following applies:
Electrical and electronic devices as well as batteries must not be disposed of with household waste.
Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives. Detailed information on this topic is defined in the national laws of the respective country. This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00014167] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity can be found on the following website: www.hama.com -> 00014167 -> Downloads.

References

• hama.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>