SOUNDPEATS TrueWings True Wireless Earbuds User Manual
- June 6, 2024
- SoundPEATS
Table of Contents
SOUNDPEATS TrueWings True Wireless Earbuds User Manual
Package Content
Specifications
Bluetooth Version
| Bluetooth 5.0
---|---
Bluetooth Chip|
RTL8763VXP
Maximum Working Range
| 33 feet / 10m (no obstacle)
Play Time|
4 hours (volume at 60%)
Earbuds Charging Time
| 1.5 hour
Case Charging Time|
2.5 hours
Charging Case Recharge Earbuds
| 4 times
Earbud Capacity|
60mAh
Charging Case Capacity
| 580mAh
Earbud Dimension|
1.670.930.98in / 42.523.525mm
Product Diagram
Button Control
Function
|
Operation
---|---
Power On
| Auto: Take out from charging case Manually: Press and hold the MFB for 1.5s
with earbud o
Power Off|
Auto: Place back into charging case Manually: Press and hold the MFB for 10s with earbud on
Play / Pause
| Double tap the right MFB
Volume +|
Tap the right MFB once
Volume –
| Tap the le‑ MFB once
Previous Track|
Press and hold le‑ MFB for 1.5s
Next Track
| Press and hold right MFB for 1.5s
Answer / Hang Up Phone Call|
Double tap the right MFB
Reject Phone Call
| Press and hold the right MFB for 1.5s
Switch Between Two Calls|
Press and hold the right MFB for 2s
Activate Voice Assistant
| Triple tap the MFB
Activate / Deactivate
Transparency Mode|
Double tap the le‑ MFB
Wearing
- Identify the left and right earbuds.
- Rotate the earbuds to make sure the ear hooks lock over your ears rmly.
- Make sure the ear tips seal your ear cancals.
Get Started
Pairing
- Take both earbuds out from the charging case, the left and right earbuds will pair to each other at rst with a prompt suggests successfully. After this, the left indicator will turn white, and right indicator ashes in red and white alternately with a voice prompt “Pairing” indicating the earbuds enter pairing mode.
- Activate the Bluetooth on your device and choose “SOUNDPEATS TrueWings” to connect. The right indicator will stop ashing with a voice prompt “Connected”.
- SOUNDPEATS TrueWings earbuds can remember previously paired device. To reconnect to one device, you only need to activate the Bluetooth in the device and take out both earbuds, the earbuds will automatically connect to each other, and then pair to the device. If they don’t re-pair automatically, please choose the pairing name to connect again.
Note:
- If the earbud doesn’t pair to each other within 5s, it would enter pairing mode and search for Bluetooth device. Both earbuds support working alone.
- If you want to change the pairing device in connected status, please have the earbuds enter pairing mode by pressing and holding the right earbud for 6s with earbuds off.
Transparency Mode
Transparency mode lets outside sound in and allows things to sound and feel
natural when you are talking to people nearby.
Double tap the left MFB to activate and deactivate transparency mode. The mode
is not applicable during calls.
Factory Reset
(Try the following steps if you fail building connection between two earbuds,
or
between earbuds and device.)
- Clear the pairing record between the earbuds and all your devices.
- Manually power off both earbuds, then press and hold both MFBs for 1 seconds until both indicators ash in white twice.
Charge
SOUNDPEATS TrueWings earbuds come with a charging case for easy carrying and charging. It can recharge both earbuds for around 4 times.
Charge the earbuds
- Place back the earbuds in the right charging slot and make sure the contactors connect.
- Charging starts with red indicators turning on.
- After fully charged, white indicators stay on for a minute before going out.
Charge the case
When the charging case is with low power left, the last white indicator on the case would flash, please recharge the charging case.
- Please charge the earbuds and case at least once every 3 months when not in use for a long time.
- To ensure charging safety, please do not use any USB charging adapter with current over 5V 1A. Please do not use quick charger to charge the earbuds and charging case.
Warranty
We warrant this product to be free from manufacturing defect for 12 MONTHS.
Email: support@soundpeatsaudio.com
Web: www.soundpeatsaudio.com
Please scan the QR code to view the detailed PDF format manual.
https://soundpeatsaudio.com/downloads/
Customer Support
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua District,
Shenzhen, China. 518109
Email: support@soundpeatsaudio.com
Web: www.soundpeatsaudio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>