SALUS TS600 Wireless Temperature Sensor Thermostat User Guide
- June 6, 2024
- SALUS
Table of Contents
Model: TS600
Quick Guide
Introduction
TS600 is a multi-functional device that can be configured to be a programmable room thermostat or a hot water timer built into a smartly designed casing and it is compatible with the SALUS Smart Home system.
Product Compliance
This product complies with the essential requirements and other relevant
provisions of Directives 2014/53/EU and 2011/65/EU. The full text of the EU
Declaration of Conformity is available at the following internet address:
www.saluslegal.com
2405-2480MHz; <14dBm
Safety Information
Use in accordance with the regulations. Indoor use only.
Keep your device completely dry. Disconnect your device before cleaning it
with a dry cloth.
Box content
Mounting
- An external sensor can be connected to the S1 and S2 terminals. Purchased separately.
- Mount the back case on the wall.
- Insert the batteries. TS600 will automatically go into pairing mode.
- Add the front case.
LED Indication
| LED | Meaning |
|---|---|
| Red LED on for 5 seconds | Factory Reset |
| Green LED flashes 0.25s on and 0.75s off | Identify Mode |
| Red LED flashes 0.3s on and 0.3s off (3.5s off last cycle) for 10 minutes |
Joining network
Amber LED flashes 0.3s on and 0.3s off (3.5s off last cycle) for 10 minutes|
Pairing device
Green LED on for 0.5 seconds| Calling heat/cool if the button is pressed
Red LED on for 0.5 seconds| No calling heat/cool if the button is pressed
Red LED flashes 3 times every 10 seconds| Low Battery
Red LED flashes 4 times every 10 seconds| Lost link with the parent
Red LED flashes twice every 10 seconds| Error
Pairing
Button operation
Press the touch button to see the status of the device. If TS600 is calling
for HEAT, the LED will be GREEN. If TS600 is SATISFIED, the LED will be RED.
If TS600 is paired, press and hold the touch button for 3 seconds. TS600 will
enter Identify mode and will send Identify commands to all related devices.
TS600 can be locked or unlocked via the app. To unlock the device manually,
you need to reset the device first and then press and hold the touch button
for 10 seconds during the first minute after reboot. The device will reset
again and unlock.
To perform a reset, press and hold the touch button for 10 seconds. The LED
will turn red for 5 seconds. TS600 will leave the network and reset. Once
completed, the TS600 will re-enter pairing mode.
DISTRIBUTOR OF SALUS CONTROLS:
QL CONTROLS Sp. z o.o., Sp. k.
Rona 4,
43-262 Kobielice,
Poland| Importer:
SALUS Controls Plc
Units 8-10 Northfield Business Park
Forge Way, Parkgate, Rotherham
S60 1SD, United Kingdom
---|---
www.salus-controls.eu
SALUS Controls is a member of the Computime Group Maintaining a policy of
continuous product development SALUS Controls plc reserves the right to change
specifications, design, and materials of products listed in this brochure
without prior notice.
Issue date: 2021 01
Version: V001
References
- Salus – Smart Technology for your comfort
- Choose your country – Salus
- SALUS Controls - intelligent temperature control
- Suelo radiante y Soluciones climáticas - Sysclima