SALUS T105RF Digital Programmable Thermostat User Guide

SALUS T105RF Digital Programmable Thermostat

Introduction

T105 / T105RF is a programmable, weekly regulator that is used to control room temperature in heating or cooling systems. Before first use please read this manual carefully. Use only AA 1,5V alkaline batteries in the thermostat. Place batteries into battery slot located under the cover. Do not use rechargeable batteries.

Product compliance

This product complies with the following EC Directives: Electromagnetic Compatibility 2004/108/CE, Low Voltage Directive 2006/95/EEC, Directive 93/68/EEC and 99/5/EC.
Full information is available on the website www.saluslegal.com

Safety Information
Use in accordance to national and EU regulations. Use the device as intended, keeping it in dry condition. Product for indoor use only. Installation must be carried out by a qualified person in accordance to national and EU regulations.

Technical specification

Wired thermostat T105

Wireless thermostat T105RF

Proper thermostat placement

LCD Icon description and button functions

1. Day of the week indicator
2. Clock
3. Antifrost Mode
4. Low battery indicator
5. Temperature unit
6. Room / setpoint temperature
7. Program timeline indicator
8. Program number
9. Temporary override
10. Eco Mode
11. Comfort Mode
12. Controlled device working status (e.g. boiler)

T105RF Wiring diagra

CHANGING THE COMMUNICATION CODE OF T105RF

Note: It is recommended to change the communication code to another than the factory to prevent other wireless devices interferences.

1. Use DIP switches numbered 1-5 inside the thermostat to change the communication code
   

2. Set DIP switches randomly – necessarily in same position on receiver as in transmitter.

3. Press RESET button after communication code changing.

Auto-adapt feature

Auto-adapt function is adjusting the operation of the heating device, so comfort temperature is reached on specific time. The auto-adapt feature is activated only when the room temperature is lower than the comfort temperature in  the upcoming program. Temperature increasing time depends on the current temperature difference. The bigger the difference, the earlier function starts to work. Minimum auto-adapt feature startup time is 10 minutes before the programmed program, and a maximum – 50 minutes.

Setting Time

Setting the economic / comfort temperature

Programs

There are 9 programs available. Programs 1-6 are factory programs. Programs 7-9 can be defined by user.

Selection of factory (1-6) programs

1. Press P button and then by pressing UP or Down choose how to program the days of the week:
   – each day separately (1, 2, 3, 4, 5, 6 or 7)
   – business days and weekend (5 + 2)
   – whole week (7)

2. Press P button and then by pressing UP or DOWN select program 1-6 for each day/days of the week.
   

3. To confirm press P button.

Choosing and programming (7-9) user programs

1. Press P button and then by pressing UP or DOWN choose how to program the days of the week:
   – each day separately (1, 2, 3, 4, 5, 6 or 7)
   – business days and weekend (5 + 2)
   – whole week (7)

2. Press P button and then by pressing UP or DOWN select program 7-9 for each day/days of the week.

3. 

4. Press P button to finish defining the program.

Antifrost mode

Simultaneously hold down and UP buttons to launch 7°C Antifrost Mode (for heating mode only). This mode will be active for the next program
change. To exit from Antifrost Mode press any key on the thermostat.

Service parameters

To change service parameters use DIP switches numbered 1-3 located inside the thermostat.

SELECTING HEATING / COOLING MODE is changed by DIP switch #3. When switch is in the upper position (ON) – thermostat operates in heating mode, when switch is in the down position (OFF) – thermostat operates in cooling mode.

SPAN CONTROL – is changed by DIP switches #1 and #2. The parameters we
can set are presented in the table below:

References

• SALUS Controls - intelligent temperature control

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>