SALUS FC600 Fan Coil Thermostat User Guide

SALUS FC600 Fan Coil Thermostat

Introduction

A SALUS FC600 is a device suitable for controlling your fan coil unit in both 2 pipe and 4 pipe systems and for managing the temperature in your home and/or working environment. For an internet connection (Online Mode), this product must be used with the SALUS Universal Gateway (UGE600) and the SALUS Smart Home App . You can also use the SALUS FC600 without an internet connection (Offline Mode). Go to www.salus-manuals.com for the full PDF version of the manual.

Product Compliance
This product complies with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU, 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.saluslegal.com

Safety Information
Use in accordance with the regulations. Indoor use only. Keep your equipment completely dry. Disconnect your equipment before cleaning it with a dry towel.

Terminals description

Terminal

Name

| Function
---|---
L,N| 230V AC power supply
V1| 4 pipe: Heating valve output – 230V AC
2 pipe: Heating or Cooling valve output – 230V AC
V2| 4 pipe: Cooling valve output – 230V AC
2 pipe: N/A
F1| Fan Speed control (Low level) – 230V AC
F2| Fan Speed control (Medium level) – 230V AC
F3| Fan Speed control (High level) – 230V AC
S1| Heat/Cool changeover

(or pipe sensor – only in 2-pipe system)*

S2| Occupancy sensor or external sensor
COM| Common Terminal for sensor and switch

Wiring Option

Button Functions

LCD Icon description

1. Auto heat/cool selection
2. Schedule icon
3. Permanent/temporary override
4. Fan is running (icon is animated)
5. Fan speed (low, medium, high, Auto, OFF)
6. Wireless communication with the Universal Gateway
7. FC600 is connected to the Universal Gateway and Internet
8. Temperature unit
9. Heating Mode ON
10. Cooling Mode ON
11. Standby mode
12. Occupancy/vacancy sensor
13. Lock function
14. AM/PM
15. Eco Mode
16. Day indicator
17. Filter icon
18. Current time
19. Sensor indicators
20. Timer icon
21. Program number
22. S1/COM Sensor indicators
23. S2/COM Sensor indicators
24. Room/setpoint temperature
25. Settings icon

Installation in Online mode

(with UGE600 and internet connection)

Make sure that your Universal Gateway is installed and added to the app. The LED must be blue.

Set up your device on the App
Success! Installation completed. (Standby Mode)

If you want to turn the FC600 on press or switch it via the App.

Installation in Offline mode (without the UGE600 and Internet connection)

Press UP/DOWN to select 2 or 4 pipe

Note: If you are using S1, S2 terminals please select the relevant settings from the table below.

EN: Press UP/DOWN to select the operating mode. It can be (Cooling), (Heating) or (Cooling and Heating). Press Tick to confirm your choice.

Setting Time

Press M for 2 seconds and press Tick to confirm
Press Tick UP/DOWN to set the hour. Press to confirm your option. Follow the same steps to set the minutes

Change the Setpoint temperature

Press UP/DOWN to set the temperature
Press Tick to confirm the changes

Installer Settings in Offline Mode

(in Online Mode installer settings are avaible via the SALUS Smart Home App)
Note: To view the full list of parameters, please consult the full manual at www .salus-manuals.com

Changing from Offline Mode to Online Mode

If you want to use the internet App and the Universal Gateway, you need to change your thermostat settings from Offline Mode to Online Mode. For that please follow the steps below:
Press Scan for equipment from the App and follow the instructions showed on the screen.
You are now in Standby Mode

Note: All system settings will be automatically saved into SALUS cloud server. You don’t need to do installation again in Online mode.

Factory Reset

If you have made an error, need to change your thermostat parameters or want to return to the factory settings, please follow steps below.

Note: This action will permanently remove all your settings.

Distributor of SALUS Controls:
QL CONTROLS Sp. z o.o., Sp. k. ul. Rolna 4 43-262 Kobielice Poland
salus@salus-controls.pl

Importer:
SALUS Controls Plc Units 8-10 Northfield Business Park Forge Way, Parkgate,
Rotherham
S60 1SD, United Kingdom

Distribuidor Oficial para España y Portugal:
Sysclima Polígono de la Serna Calle C, Nave 6.14 E-31500 Tudela (Navarra)
www.sysclima.com

www.salus-controls.eu

SALUS Controls is a member of the Computime Group
Maintaining a policy of continuous product development SALUS Controls plc reserve the right to
change specification, design and materials of products listed in this brochure without prior notice.

References

• Control4 Smart Homes
• Choose your country – Salus
• salus-manuals.com
• Salus – Smart Technology for your comfort

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>