MIBOXER B8 8-Zone Smart Panel Remote Controller Installation Guide
- June 6, 2024
- MiBOXER
Table of Contents
Mi. light
Subordinate New Brand
8-Zone Smart Panel Remote Controller
Model No.: B8
Features
This 8-zone smart panel remote is made of an elegant salinity panel and high-
precision touching IC; touching is more stable and sensitive. And adopt
worldwide used 2.4GHz frequency, GFSK control method, with the features of
low power consumption, long-distance transmitting, strong anti-interference,
and fast communication rate; can control
specified Mi-Light smart light with color, color temperature, saturation, and
brightness changing. Working on all our MiBoxer LED lamps, controller and
panel controllers, etc.
Parameters
Model No.: B8
Working Voltage: 3V(2AAA Battery) / DC3.3V
Transmitting Power: 6dBm
Standby Power: 30uA| Transmission Frequency: 2.4GHz
Modulation Method: GFSK
Control Distance: 30m
Working Temp.: -20~60 ℃
Size: 106146*20mm
---|---
Panel Remote
Controller Name| Compatible
Remote Model| Compatible Products
---|---|---
8-Zone Smart Panel
Remote Controller| FUT089| RGB+CCT series
LED Bulb series
LED Floodlight series
5 in 1 Smart LED Controller
Function of keys
Remark:
When touching the button, the LED indicates the lamp will flash once with a
different sound(Touch slider with no sound).
Touch the color ring to change colors.
Under white light mode, adjust color temperature; Under color light mode,
change color saturation.
Slide the brightness slider to adjust the brightness.
W Press the button to get white light.
ON Turn on the linked lights. Long press the “ON” button for 10 seconds
to set up the button sound.
OFF Turn off the linked lights. Long press the “OFF” button for 10
seconds to close the button sound.
60S Delay OFF Press the button, to open the “60S delay ” Function, the
indicating lamp will shine; Press again cancel the “60S delay” Function, the
indicating lamp will be off.
M Dynamic mode switching button.
S- Lower the dynamic mode speed.
S+ Accelerate the dynamic mode speed.
ALL Press the “ALL” button, to control all linked lights, and the
indicating lamp shine meanwhile.
1…..8 Press 1-8 zone, to control the corresponding … zone linked lights,
and indicate the lamp will shine.
Installation/ Dismantlement
Linking Instructions
1 Click the 1-8 zones button you want to link, the corresponding indicating
lamp will shine.
2. Switch off the light, after 10 seconds switch on again
3 .hen
the light is on, short press ” ” 3 times within 3 seconds
4. The light blinks 3 times slowly means the linking is done successfully.
If the light does not blink slowly, the linking failed, Pls switch off the light again, and follow the above steps again.
Unlinking Instructions
1 . Click the 1-8 zones button you want to unlink, the corresponding
indicating lamp will shine. Unlinking must be the same zone with the Linking
2 . Switch off the light, after 10 seconds switch on again.
3 . When the light is on, short press ” ” 5 times within 3 seconds
4 . The light blinking 10 times quickly, means unlinking successfully.
If the light does not blink quickly, the unlink failed, pls switch off the light again, and follow the above steps to unlink again.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>