CANYON CNE-SB01BN Fitness Smart Band User Guide
- June 6, 2024
- CANYON
Table of Contents
CANYON CNE-SB01BN Fitness Smart Band
FITNESS SMART BAND
- Colorful 0,96 inches LCD display
- Multisport mode
- IP67 waterproof
- Heart rate monitor
- Compatibility with iOS and Android OS
COMPLETE SET INCLUDED INTO THE PACKAGE
- Smart band
- TPU strap
- Battery (built-in)
- USB charging kit
- User manual
USAGE
Make sure that your smartwatch is fully charged before usage.
Charging: pull the watch body out of the wristband. Then stick the watch body
into its charging kit and connect it to the USB port of your computer, a wall
socket adapter or a power bank. Charging progress will be indicated on the
screen. For better charging compatibility, it is advisable to use a Power Bank
or a charger produced by Canyon.
Charger requirements: 5V / 1A.
Charging time: 1-1,5 hours depending on a source of charge. The smart band
cannot be used while in charging mode.
Disassembling: while holding the wristband with your hand, hook the watch body
at its bottom with your finger and pull it up.
Assembling: put the upper side into the wristband, and push the watch body
into the wristband.
Turning on: press and hold the functional button marked as a circle on the
front side of the watch body.
Turning off: Press the functional button to activate the screen, then tap it
several more times to see a menu item “Setting”. Press and hold the button to
enter submenu. “Off” menu item is active once submenu is opened – press and
hold the button to turn watch off.
Connecting to a smartphone: charge the smart band, turn it on, activate
Bluetooth on your smartphone, download and install Canyon Smart Watch
application Canyon Life app by scanning the QR code below. Open Canyon Life
app-> “Bluetooth devices” -> “Start” -> choose your device from the list
->(SB01BN) -> press “Add device” and you will see the device will be
successfully connected. Use the application to apply needed settings: fill in
your body parameters, select apps that you want to receive notifications from,
etc.
Scan this QR code to download and install the application Сanyon Life:
FEATURES
Time:
Time, date and remaining power are shown on the watch face. Once the smart band is connected to your device, the time will be synchronised with your device time. The time cannot be set on the smart band.
Status Mode:
Shows user steps (daily), walking distance, calorie consumption.
Heart Rate: Select the heart rate function to monitor your heart rate.
Multi-sport mode :
Press and hold button on the sport mode interface to enter the sports selection page. There are five different sport modes for selection: running indoor, running outdoor, cycling, sport walking, and exercise modes. Press and hold button on your selected mode to start recording exercise time and calories burnt. Press to pause, press and hold to return.
Weather forecast:
The real-time weather conditions will be synchronised with your device data
and shown on the time display interface. The smart band needs to be connected
to the App and the device GPS function needs to be turned on.
The date of purchase is indicated in your sales receipt or a waybill. During
warranty period, a repair, replacement or refund of payment for goods are
performed on discretion.
More:
Do not disturb:
press and hold to cancel or turn on vibration;
Music:
press and hold to enter music control panel, press to switch or press and
hold to confirm;
Timer:
press and hold to enter timer or press to pause/start;
Find my phone:
press and hold for 5 second to enter phone finding mode→press to start→find
the phone according to the ringtone and vibration→press and hold to stop.
Please make sure the phone and the smart band are connected and within
operating range.
Settings:
Turn off:
press and hold to turn off, press to switch;
Reset:
press and hold to reset, press to switch;
About:
press and hold to check the firmware version, BT MAC address, press and hold
to return or return after five seconds.
Others:
charging alert, alarm reminder, sedentary reminder, incoming call display,
shake to take picture, WhatsApp, Facebook/Text and other message
notifications.
TROUBLESHOOTING
| Problem | Solution |
|---|
Your
| Make sure that it’s fully charged.
Then press and hold the round
smartwatch| button on the front side of the
doesn’t turn| watch body. If nothing helps, please
on| contact your shop of purchase for warranty support.
Your| Make sure that you’ve activated Bluetooth, GPS, Location Services with
high presicion, WiFi on your smartphone
smartwatch
isn’t detected
by a
smartphone
Your|
smartwatch|
is detected by a
smartphone,
| Turn the smartwatch off and then turn it back on.
but fails to|
connect|
If the actions from above-mentioned list do not help, please contact support
service at Canyon web-site: http://canyon.eu/ask-your-question/
SAFETY INSTRUCTIONS
Read and follow all instructions before usage of this device.
- Protect the device from excessive amount of water: this smartwatch can be immersed into water for up to a maximum depth of 1m underwater for a very short time. It’s forbidden to use it for swimming.
- Protect the device from heat: do not install heating devices near it, and do not expose to direct sunlight during hot season for a long time.
- Protect the device from smashing: avoid dropping the device from over 0,5m to hard surfaces.
Warning! Do not use in hot water. This can lead to damage to the device! Avoid contact between the magnetic charger and other metal objects (i.e the metal strap when charging).
WARRANTY LIABILITIES
Warranty period starts from the date of the device’s purchase from the Seller,
authorized by Canyon. The date of purchase is indicated in your sales receipt
or a waybill. During warranty period, a repair, replacement or refund of
payment for goods are performed on discretion.
Manufacturer: Asbisc Enterprises PLC, 43, Diamond Court, Kolonakiou Str,
4303, Limassol, Cyprus, Agios Athanasios, http://canyon.eu/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>